Mini fusto fascia poligonale【5 Pezzi per confezione】
Fare clic sull'immagine per ingrandirla.
Cliccare sull´immagine per ingrandirla.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
Codice componente
|
|---|
| PGBDM1020 |
| PGBDM1220 |
| PGBDM820 |
| Codice componente |
Prezzo unitario standard
| Numero di pz. inclusi per conf. | Quantità minima d'ordine | Sconto volumi elevati | Diameter (mm) | Trusco Code | Order Code | |
|---|---|---|---|---|---|---|---|---|
50.51 € | 5 Pezzi per confezione | 1 conf. | 6 giorni | 10 | 409-1094 | 468-27846 | ||
50.51 € | 5 Pezzi per confezione | 1 conf. | 6 giorni | 12 | 409-1108 | 468-27855 | ||
50.51 € | 5 Pezzi per confezione | 1 conf. | 6 giorni | 8 | 409-1124 | 468-27837 |
Loading...
Informazioni di base
| Application | Lucidatura | Type | Tamburo | Width(mm) | 20 |
|---|---|---|---|---|---|
| Shaft Diameter(mm) | 6 | Shaft length(mm) | 35 | Max. Rotational Speed(min-1(r.p.m)) | 25000 |
| Application | Deburring after drilling; fine adjustment of inner diameters etc. and inner surface polishing of curved surfaces and pipes etc.; weld bead removal; removal of rust caused by machinery maintenance, etc. for sputtering equipment; paint peeling, finishing work, and deburring after cutting, etc.; and hairline, etc. order finishing as a substitute for work done using a grinding wheel with a shaft or a carbide bar, such as aluminum casting parting line removal, and deburring, etc. | Caution | * Never use beyond the maximum usage rotation number. * Be sure to insert the red finished surface of the mini polygon band facing in front of the drum shaft before use. * Please securely affix the dedicated drum shaft by inserting the rotation tool (grinder, drill, etc.) 2/3 of the shaft length. * When performing polishing work, please wear protective glasses, a dust mask, gloves, and a hat. * Please store away from direct sunlight, extreme aridity, and/or high humidity conditions. * Please read the handling instructions for the disk grinder to be used, and use only upon confirming that the product is in compliance. | Material | Metal shaft+rubber |
| Features | Micro Flap works linearly while Polygon Band Mini works on a plane, which makes it extremely fast. Reduces work time to 1/5. Produces surprisingly little waste after use compared to Micro Flap. Reduces waste volume to 1/5. Small-hole bearded needle can be easily removed. A hairline finish can easily be applied to iron, aluminum and stainless steel. |
Configura
Proprietà di base
-
Diameter(mm)
-
Trusco Code
-
Order Code
-
Tipo
- PGBD
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 6 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.