• 10 milioni di componenti
  • Spedizione in giornata per 30.000 articoli
  • Prezzi competitivi

I nostri uffici sono aperti lun.- giov. 8:00 - 17:00, ven. 8:00-16:00 (GMT+2)

Ricerca per categoria
o fornitore

Ricerca per categoria
Componenti meccanici
Viti, bulloni, rondelle, dadi
Materiali industriali
Materiale elettrico
Controlli e parti per PC
Utensili da taglio
Materiali industriali
Materiali per imballaggio
Materiale sanitario, per uffici, per antinfortunistica
Materiali per R&D e camera bianca
Componenti per stampi deformazione lamiera
Componenti per stampi iniezione plastica

Ricerca per fornitore
Lista fornitori

Testa fresante a sfera in metallo duro(pagina3)

  • Numero di dati da visualizzare
    30
    45
    60
  • Ordina
Giorni spedizione
  • Tutti gli articoli
  • 3 giorni o meno
  • 4 giorni o meno
  • 5 giorni o meno
  • 6 giorni o meno
  • 7 giorni o meno
  • 33 giorni o meno
  • SA Coated Carbide 2-Flute Ball Long Shank

    SA Coated Carbide 2-Flute Ball Long Shank

    SANKO MFG

    Can process materials ranging from green wood to hardened steel. Long shank allows machining of deep areas.

    • Sconto volumi elevati
    A partire da
    76.47€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • SA Coated Carbide, 4-Flute Ball

    SA Coated Carbide, 4-Flute Ball

    SANKO MFG

    Can process materials ranging from green wood to hardened steel. Can do high speed machining / high efficiency machining due to 4-blade design.

    • Sconto volumi elevati
    A partire da
    93.01€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • GS MILL Hard Ball End Mill GSBH20000SF Type

    GS MILL Hard Ball End Mill GSBH20000SF Type

    SUMITOMO ELECTRIC HARDMETAL

    Uses AL-TI-CR based layered coating GS hard coat and high hardness ultra-fine particle-based low-CO cemented carbide. Increased oxidation resistance up to 1100°C, improved heat resistance and wear performance at the ultra-high speed range.

    A partire da
    71.72€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

    TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

    MISUMI

    The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel

    • Sconto volumi elevati
    • TS
    • High-Hardness Steel
    • 2 Flutes
    • B (Stub)
    A partire da
    29.48€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Carbide Graphite Solid Ball End Mill 2 Flute Long Type

    Carbide Graphite Solid Ball End Mill 2 Flute Long Type

    EIKOSHA

    Graphite Electrode Processing Long Hilt

    A partire da
    112.08€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • CBN Super Finish Ball End Mill

    CBN Super Finish Ball End Mill

    NS TOOL

    Innovative blade edge design provides fantastic cutting performance to the center of the R. 60HRC Tempered Steel Allows Over 10 Continuous Hours of Finishing Work

    A partire da
    144.04€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • For Copper Electrode / Aluminum / Plastic Ball End Mill DB

    For Copper Electrode / Aluminum / Plastic Ball End Mill DB

    NS TOOL

    Having very sharp cutting edge, it is able to deliver outstanding performance in non-ferrous processing

    A partire da
    57.44€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • 2-Flute, Ball End (Heavy Duty Type) WXL-HS-EBD

    2-Flute, Ball End (Heavy Duty Type) WXL-HS-EBD

    OSG

    WXL coating with excellent lubrication and abrasion resistance. Compatible With a Wide Range of Materials and Cutting Regions

    • Sconto volumi elevati
    A partire da
    14.07€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • 2-Flute, for Plus Check, Ball End CRN-EBD

    2-Flute, for Plus Check, Ball End CRN-EBD

    OSG

    Ball end mill makes dry shaving of copper and copper alloys possible with the CRN coated, well sharpened blade shape.

    • Sconto volumi elevati
    A partire da
    83.63€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • 2-Flute Pencil Neck, Ball End DIA-PC-EBD

    2-Flute Pencil Neck, Ball End DIA-PC-EBD

    OSG

    Pencil neck bore compatible to ultra deep slotting of graphite electrode. Ultra fine crystal diamond coating realizes dramatic elongation of tool life.

    • Sconto volumi elevati
    A partire da
    247.77€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • SA Coated Carbide, 2-Flute Ball

    SA Coated Carbide, 2-Flute Ball

    SANKO MFG

    Can process materials ranging from green wood to hardened steel.

    • Sconto volumi elevati
    A partire da
    60.62€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Solid Ball End Mills ESL-SBE Type

    Solid Ball End Mills ESL-SBE Type

    DIJET

    Cemented carbide with superior abrasion resistance adopted as a base material, achieving long-life graphite processing.

    A partire da
    218.32€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • X's Mill, Geo Ball, Long Shank, 2GEOLSR

    X's Mill, Geo Ball, Long Shank, 2GEOLSR

    NACHI(FUJIKOSHI)

    Long shank. Suitable for contour machining at depth.

    A partire da
    71.53€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • X's Mill, Geo Ball, Pencil Neck, 2GEOPNR

    X's Mill, Geo Ball, Pencil Neck, 2GEOPNR

    NACHI(FUJIKOSHI)

    Ball end mill for pencil neck. Suitable for contour machining at depth.

    A partire da
    74.72€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Ball End Mill for High-Speed / High-Hardness Machining with Short Shank (for Shrink Fitting)

    Ball End Mill for High-Speed / High-Hardness Machining with Short Shank (for Shrink Fitting)

    NS TOOL

    Short shank (capable of shrink fitting). A lineup of ball end mills designed for high-speed machining of high-hardness work materials.

    A partire da
    31.61€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Miniature Ball End Mills, NCB-2

    Miniature Ball End Mills, NCB-2

    NS TOOL

    Essential for high-precision, high-quality precision mold making. Achieves high rigidity even in small diameters, providing high feed rates.

    A partire da
    61.99€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • MUGEN Coating Super Long Shank Ball End Mill MSBXL230

    MUGEN Coating Super Long Shank Ball End Mill MSBXL230

    NS TOOL

    Extra long ball end-mill with infinite coating. Can perform long shank machining

    A partire da
    85.58€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • 2-Flute, Ball End, CBN-EBD

    2-Flute, Ball End, CBN-EBD

    OSG

    Very efficient in machining of high hardness materials and cast iron

    A partire da
    235.12€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • 2-Flute, Ball End, CBN-SXB

    2-Flute, Ball End, CBN-SXB

    OSG

    Spiral ball blade with its own twist achieve deep cuts in acute sharpness and small diameter. CBN end mill that can be used in the cut of the Carbide

    A partire da
    125.02€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • 2-Flute, Ball End, DIA-EBD-SF

    2-Flute, Ball End, DIA-EBD-SF

    OSG

    Demonstrates excellent durability against graphite and aluminum processing

    A partire da
    256.27€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • 2-Flute, Ball End, DLC-EBD

    2-Flute, Ball End, DLC-EBD

    OSG

    Ultra-smooth DLC coating prevents welding. It is possible to achieve high-speed in the shape processing such as aluminum alloy, and good surface finishing can also be obtained.

    • Sconto volumi elevati
    A partire da
    78.33€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • 2-Flute, for Plus Check, Ball End CAP-EBD

    2-Flute, for Plus Check, Ball End CAP-EBD

    OSG

    Ball end mill for copper, aluminum alloy, and plastic. Good cutting properties and expels debris well.

    • Sconto volumi elevati
    A partire da
    68.75€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • 2-Flute Pencil Long Neck, Ball End FX-PCL-EBD

    2-Flute Pencil Long Neck, Ball End FX-PCL-EBD

    OSG

    Ball end mill for deep engraving work that ordinary end mills can't reach.

    A partire da
    257.08€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • For Finishing 2 Flute Ball End (HSK Compatible) FX-H-EBD

    For Finishing 2 Flute Ball End (HSK Compatible) FX-H-EBD

    OSG

    Achieves stable cutting with not only HSK holders but also with L / D large shrink long arbors.

    • Sconto volumi elevati
    A partire da
    83.15€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Standard Ball End Mill, 4-Flute

    Standard Ball End Mill, 4-Flute

    ATOM

    Can be used with a wide range of applications such as common steel and non-ferrous metals and resin. All-purpose type that can handle everything from rough processing to finishing.

    A partire da
    59.37€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Solid Ball End Mills LN-SBEL Type

    Solid Ball End Mills LN-SBEL Type

    DIJET

    Cemented carbide with superior abrasion resistance adopted as a base material, achieving long-life graphite processing.

    A partire da
    90.02€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Special R Shape Bottom Blade 6 Blades High Feed Machining 6PDRS

    Special R Shape Bottom Blade 6 Blades High Feed Machining 6PDRS

    KYOCERA

    Increase strength by making the core diameter big. High feed milling is possible with the 6-blade specifications.

    A partire da
    107.68€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • GS MILL Long Neck Hard Ball GSBNH2

    GS MILL Long Neck Hard Ball GSBNH2

    NACHI(FUJIKOSHI)

    Suitable for microfabrication of mold. A variety of size alignment allows for multiple types of machining.

    A partire da
    29.64€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • GS MILL Hard Ball GSBH

    GS MILL Hard Ball GSBH

    NACHI(FUJIKOSHI)

    Suitable for high-speed finishing of high hardness material machining.

    A partire da
    67.60€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • MUGEN Coating High Speed / Ball End Mill for High Hardness Machining

    MUGEN Coating High Speed / Ball End Mill for High Hardness Machining

    NS TOOL

    Many cut depths can be configured, rapid feed and high feed achieving

    A partire da
    35.56€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • 2-Flute, for Graphite, Ball End DG-EBD

    2-Flute, for Graphite, Ball End DG-EBD

    OSG

    Diamond coating end-mill for aluminum processing. Promises wonderful elongation of tool life.

    A partire da
    112.72€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • 2-Flute, Ball End, Miniature, CRN-EBD-3

    2-Flute, Ball End, Miniature, CRN-EBD-3

    OSG

    A series of bore-end small diameter radius mills with CRN coating to improve lubricity.. Well suited for detail work on copper electrodes and IT components.

    A partire da
    69.89€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • 2-Flute, Ultra-High Precision Ball End WXE-EBD

    2-Flute, Ultra-High Precision Ball End WXE-EBD

    OSG

    Ultra-high-precision ball end mill series for carpenters. Blade section accuracy and precision grade swing, in addition to high-precision R-precision. HP3 spec comes with a product precision guarantee.

    • Sconto volumi elevati
    A partire da
    94.88€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • 2-Flute, Ball End with Lubricant Hole (High-Rigidity) FXS-HO-EBDS

    2-Flute, Ball End with Lubricant Hole (High-Rigidity) FXS-HO-EBDS

    OSG

    Extremely increased rigidity ball end mill with oil hole for high hardness steel.

    • Sconto volumi elevati
    A partire da
    105.32€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • 3-Flute Ball End (High-Efficacy) FXS-EBT

    3-Flute Ball End (High-Efficacy) FXS-EBT

    OSG

    Allows high efficiency machining with up to 50% increased table feed due to the ball geometry formed by 3-blades to the center.

    • Sconto volumi elevati
    A partire da
    84.40€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • 3-Flute Ball End, High-Cut High-Feed Type PHX-DBT

    3-Flute Ball End, High-Cut High-Feed Type PHX-DBT

    OSG

    New concept ball end mill with a low-resistance blade tool shape for a large amount of cutting per blade. Can perform high-feed machining like never before.

    • Sconto volumi elevati
    A partire da
    84.68€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Ball, 2-Flute, for DL Coated Aluminum Carbide

    Ball, 2-Flute, for DL Coated Aluminum Carbide

    SANKO MFG

    The DLC coating provides excellent wear resistance and surface smoothness, and prevents welding. Suitable for aluminum machining.

    • Sconto volumi elevati
    A partire da
    100.25€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • GS MILL Ball End Mill GLB2000SF Type

    GS MILL Ball End Mill GLB2000SF Type

    SUMITOMO ELECTRIC HARDMETAL

    By adoption of low-CO carbide base material, improves the rigidity and abrasion resistance simultaneously. By adopting ultra-smooth TIALN diameter coat, the cutting resistance is reduced along with the improvement of abrasion resistance, and high-efficiency roughing can be performed.

    A partire da
    28.76€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Aurora Coat, Ball End Mill, Model SNB2000DL

    Aurora Coat, Ball End Mill, Model SNB2000DL

    SUMITOMO ELECTRIC HARDMETAL

    Welding with ultra-smooth auroral coat is reduced and finishes surface. Since the cutting resistance is small, high feed cutting and low rigidity workpiece machining is possible.

    A partire da
    87.56€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Spiral Ball End Mill, Model SSB2000

    Spiral Ball End Mill, Model SSB2000

    SUMITOMO ELECTRIC HARDMETAL

    The R Section is Also Twisted, Making It Ideal For High Efficiency Profile Machining

    A partire da
    53.82€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • BEM2, Solid Long Shank, Ball End Mill G2

    BEM2, Solid Long Shank, Ball End Mill G2

    ASAHI TOOLS

    2-flute ball end mill, long shank type. Suitable for R processing of corner sections.

    • Sconto volumi elevati
    A partire da
    89.02€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • DZ-COAT Solid Ball End Mill DZ-DBSS-S Shape

    DZ-COAT Solid Ball End Mill DZ-DBSS-S Shape

    DIJET

    Demonstrates long tool lif, due to ultrafine cemented carbide with excellent wear resistance.

    A partire da
    77.96€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Model GF-SBR Solid Ball End Mill for Graphite

    Model GF-SBR Solid Ball End Mill for Graphite

    DIJET

    Cemented carbide with superior abrasion resistance adopted as a base material, achieving long-life graphite processing.

    A partire da
    76.20€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Solid Ball End Mills S-SBE Type

    Solid Ball End Mills S-SBE Type

    DIJET

    Cemented carbide with superior abrasion resistance adopted as a base material, achieving long-life graphite processing.

    A partire da
    97.02€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Beam Ball End Mills VN-DBS2 Type

    Beam Ball End Mills VN-DBS2 Type

    DIJET

    Demonstrates long tool lif, due to ultrafine cemented carbide with excellent wear resistance.

    A partire da
    565.08€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

Configura

Ripristina

Limitare la ricerca specificando Spec./Dim.

  • R Size(mm)

    • 0.005
    • 0.01
    • 0.015
    • 0.02
    • 0.025
    • 0.03
    • 0.04
    • 0.05
    • 0.075
    • 0.1
    • 0.125
    • 0.15
    • 0.175
    • 0.2
    • 0.225
    • 0.25
    • 0.275
    • 0.3
    • 0.325
    • 0.35
    • 0.375
    • 0.4
    • 0.425
    • 0.45
    • 0.475
    • 0.5
    • 0.55
    • 0.6
    • 0.65
    • 0.7
    • 0.75
    • 0.8
    • 0.85
    • 0.9
    • 0.95
    • 1
    • 1.05
    • 1.1
    • 1.15
    • 1.2
    • 1.25
    • 1.3
    • 1.35
    • 1.4
    • 1.45
    • 1.5
    • 1.55
    • 1.6
    • 1.65
    • 1.7
    • 1.75
    • 1.8
    • 1.85
    • 1.9
    • 1.95
    • 2
    • 2.05
    • 2.1
    • 2.15
    • 2.2
    • 2.25
    • 2.3
    • 2.35
    • 2.4
    • 2.45
    • 2.5
    • 2.55
    • 2.6
    • 2.65
    • 2.7
    • 2.75
    • 2.8
    • 2.85
    • 2.9
    • 2.95
    • 3
    • 3.05
    • 3.1
    • 3.15
    • 3.175
    • 3.2
    • 3.25
    • 3.3
    • 3.35
    • 3.4
    • 3.45
    • 3.5
    • 3.55
    • 3.6
    • 3.65
    • 3.7
    • 3.75
    • 3.8
    • 3.85
    • 3.9
    • 3.95
    • 4
    • 4.05
    • 4.1
    • 4.15
    • 4.2
    • 4.25
    • 4.3
    • 4.35
    • 4.4
    • 4.45
    • 4.5
    • 4.55
    • 4.6
    • 4.65
    • 4.7
    • 4.75
    • 4.8
    • 4.85
    • 4.9
    • 4.95
    • 5
    • 5.05
    • 5.1
    • 5.15
    • 5.2
    • 5.25
    • 5.3
    • 5.35
    • 5.4
    • 5.45
    • 5.5
    • 5.55
    • 5.6
    • 5.65
    • 5.7
    • 5.75
    • 5.8
    • 5.85
    • 5.9
    • 5.95
    • 6
    • 6.05
    • 6.1
    • 6.15
    • 6.2
    • 6.25
    • 6.3
    • 6.35
    • 6.4
    • 6.45
    • 6.5
    • 6.75
    • 6.8
    • 6.85
    • 6.9
    • 6.95
    • 7
    • 7.05
    • 7.1
    • 7.15
    • 7.2
    • 7.25
    • 7.3
    • 7.35
    • 7.4
    • 7.45
    • 7.5
    • 7.55
    • 7.6
    • 7.65
    • 7.7
    • 7.75
    • 7.8
    • 8
    • 8.05
    • 8.1
    • 8.2
    • 8.25
    • 8.3
    • 8.4
    • 8.5
    • 8.75
    • 9
    • 9..5
    • 9.25
    • 9.5
    • 9.75
    • 10
    • 10.25
    • 10.5
    • 10.75
    • 11
    • 11.5
    • 12
    • 12.25
    • 12.5
    • 12.75
    • 13
    • 14
    • 15
    • 16
    • 18
    • 20
    • 22
    • 22.5
    • 23
    • 24
    • 25
  • Model

  • Work Material

  • Flute Length (ℓ)(mm)

    • 0.01~0.96
      • 0.01
      • 0.02
      • 0.03
      • 0.04
      • 0.05
      • 0.06
      • 0.07
      • 0.08
      • 0.1
      • 0.12
      • 0.15
      • 0.16
      • 0.2
      • 0.23
      • 0.24
      • 0.3
      • 0.32
      • 0.35
      • 0.38
      • 0.4
      • 0.45
      • 0.48
      • 0.5
      • 0.6
      • 0.63
      • 0.64
      • 0.65
      • 0.7
      • 0.75
      • 0.76
      • 0.8
      • 0.9
      • 0.95
      • 0.96
    • 1~1.95
      • 1
      • 1.1
      • 1.12
      • 1.2
      • 1.25
      • 1.26
      • 1.28
      • 1.3
      • 1.4
      • 1.45
      • 1.5
      • 1.6
      • 1.65
      • 1.7
      • 1.75
      • 1.8
      • 1.9
      • 1.95
    • 2~2.9
      • 2
      • 2.1
      • 2.2
      • 2.25
      • 2.3
      • 2.4
      • 2.5
      • 2.55
      • 2.6
      • 2.7
      • 2.75
      • 2.8
      • 2.85
      • 2.9
    • 3~3.9
      • 3
      • 3.2
      • 3.25
      • 3.3
      • 3.5
      • 3.6
      • 3.7
      • 3.75
      • 3.8
      • 3.85
      • 3.9
    • 4~4.8
      • 4
      • 4.1
      • 4.2
      • 4.25
      • 4.4
      • 4.5
      • 4.75
      • 4.8
    • 5~5.9
      • 5
      • 5.1
      • 5.25
      • 5.3
      • 5.4
      • 5.5
      • 5.6
      • 5.7
      • 5.9
    • 6~6.9
      • 6
      • 6.2
      • 6.25
      • 6.3
      • 6.5
      • 6.6
      • 6.7
      • 6.8
      • 6.9
    • 7~7.5
      • 7
      • 7.1
      • 7.2
      • 7.4
      • 7.5
    • 8~8.9
      • 8
      • 8.1
      • 8.3
      • 8.4
      • 8.5
      • 8.6
      • 8.7
      • 8.9
    • 9~9.5
      • 9
      • 9.5
    • 10~10.5
      • 10
      • 10.5
    • 11~11.5
      • 11
      • 11.5
    • 12~12.5
      • 12
      • 12.5
    • 13~13.5
      • 13
      • 13.5
    • 14~14.5
      • 14
      • 14.5
    • 15
    • 16~16.5
      • 16
      • 16.5
    • 17
    • 18
    • 19
    • 20
    • 21
    • 22
    • 23
    • 24
    • 25
    • 26
    • 27
    • 28
    • 30
    • 32
    • 34
    • 35
    • 36
    • 38
    • 40
    • 45
    • 46
    • 48
    • 50
    • 55
    • 56
    • 58
    • 60
    • 65
    • 70
    • 80
    • 90
    • 100
    • 110
    • 120
    • 130
    [5-30/1Incrementi di mm]
  • Number of Flutes(Pieces)

    • 1
    • 2
    • 3
    • 4
    • 6
  • Coating

  • Overall Length (L)(mm)

    • 32
    • 34
    • 35
    • 40
    • 45
    • 49
    • 50
    • 52
    • 53
    • 55
    • 57
    • 58
    • 60
    • 63
    • 65
    • 70
    • 72
    • 75
    • 76
    • 80
    • 83
    • 85
    • 90
    • 92
    • 100
    • 104
    • 105
    • 110
    • 115
    • 120
    • 125
    • 130
    • 140
    • 150
    • 160
    • 170
    • 180
    • 190
    • 200
    • 210
    • 220
    • 230
    • 240
    • 250
    • 280
    • 300
    • 330
    • 350
  • Length Under Neck (ℓ1)(mm)

    • 0.2~0.95
      • 0.2
      • 0.3
      • 0.4
      • 0.45
      • 0.5
      • 0.6
      • 0.75
      • 0.8
      • 0.86
      • 0.9
      • 0.95
    • 1~1.8
      • 1
      • 1.1
      • 1.2
      • 1.25
      • 1.5
      • 1.6
      • 1.75
      • 1.8
    • 2~2.8
      • 2
      • 2.1
      • 2.2
      • 2.25
      • 2.3
      • 2.4
      • 2.5
      • 2.7
      • 2.75
      • 2.8
    • 3~3.8
      • 3
      • 3.3
      • 3.5
      • 3.6
      • 3.75
      • 3.8
    • 4~4.8
      • 4
      • 4.2
      • 4.3
      • 4.4
      • 4.5
      • 4.6
      • 4.8
    • 5~5.8
      • 5
      • 5.2
      • 5.4
      • 5.5
      • 5.6
      • 5.8
    • 6~6.5
      • 6
      • 6.5
    • 7~7.8
      • 7
      • 7.5
      • 7.8
    • 8~8.5
      • 8
      • 8.5
    • 9~9.5
      • 9
      • 9.5
    • 10~10.5
      • 10
      • 10.5
    • 11
    • 12~12.5
      • 12
      • 12.5
    • 13
    • 14
    • 15
    • 16
    • 17~17.5
      • 17
      • 17.5
    • 18
    • 20
    • 21
    • 22
    • 23.1
    • 24
    • 25~25.6
      • 25
      • 25.6
    • 26~26.9
      • 26
      • 26.8
      • 26.9
    • 27~27.6
      • 27
      • 27.6
    • 28~28.7
      • 28
      • 28.7
    • 30
    • 31~31.6
      • 31
      • 31.5
      • 31.6
    • 32~32.1
      • 32
      • 32.1
    • 33~33.6
      • 33
      • 33.5
      • 33.6
    • 34
    • 35~35.6
      • 35
      • 35.5
      • 35.6
    • 36~36.1
      • 36
      • 36.1
    • 38~38.6
      • 38
      • 38.2
      • 38.6
    • 39.5
    • 40
    • 41~41.4
      • 41
      • 41.2
      • 41.4
    • 42~42.2
      • 42
      • 42.2
    • 43.2
    • 44~44.7
      • 44
      • 44.2
      • 44.7
    • 45~45.2
      • 45
      • 45.2
    • 46~46.7
      • 46
      • 46.5
      • 46.7
    • 47.5
    • 48~48.9
      • 48
      • 48.7
      • 48.9
    • 49
    • 50~50.7
      • 50
      • 50.1
      • 50.7
    • 52
    • 54~54.5
      • 54
      • 54.5
    • 55
    • 56
    • 57
    • 58~58.5
      • 58
      • 58.5
    • 60~60.8
      • 60
      • 60.3
      • 60.8
    • 61.3~61.8
      • 61.3
      • 61.8
    • 62~62.5
      • 62
      • 62.3
      • 62.5
    • 63.3
    • 64.3
    • 65~65.1
      • 65
      • 65.1
    • 70
    • 75
    • 80~80.4
      • 80
      • 80.4
    • 81.4
    • 82.4
    • 85
    • 90~90.4
      • 90
      • 90.4
    • 92.9
    • 100
    • 110
    • 112
    • 120~120.6
      • 120
      • 120.6
    • 121.6
    • 122.6
    • 130
    • 140
    • 150
    • 160~160.8
      • 160
      • 160.8
    [4-80/1Incrementi di mm]
  • Link Diameter (d)(mm)

    • 0.4
    • 0.6
    • 1
    • 1.5
    • 2
    • 2.5
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 14
    • 15
    • 16
    • 18
    • 20
    • 25
    • 32
    • 42
  • R Precision(µm)

    • -10 ~ +10
    • -0.03 ~ 0
    • -0.015 ~ +0.015
    • -0.01
    • -0.01 ~ +0.01
    • -0.01 ~ 0.01
    • -0.008 ~ +0.008
    • -0.007 ~ +0.003
    • -0.007 ~ +0.007
    • -0.007 ~ 0.003
    • -0.007 ~ 0.007
    • -0.005 ~ +0.001
    • -0.005 ~ +0.005
    • -0.005 ~ 0.005
    • -0.003 ~ +0.003
    • -0.003 ~ 0.003
    • -0.002 ~ 0.002
    • 0 ~ -0.015
    • 0 ~ -0.03
    • 0 ~ -0.04
    • 0 ~ -30
    • 0 ~ -40
    • 0 ~ -50
    • 0 ~ 0.005
    • 0.002 ~ -0.002
    • 0.003 ~ -0.003
    • ±0.003
    • 0.005 ~ -0.005
    • ±0.005
    • ±0.006
    • ±0.007
    • ±0.008
    • ±0.009
    • 0.01 ~ -0.01
    • ±0.01
    • ±0.010
    • ±0.011
    • ±0.012
    • 0.02 ~ -0.02
    • ±0.02
    • 5 ~ -5
    • 10 ~ -10
    • 20 ~ -20
  • Processing Applications

Limitare la ricerca specificando il produttore

Marchio

Prodotti MISUMI
  • Prodotti convenienti
Prodotti commerciali MISUMI

Limitare la ricerca specificando Tipo dati CAD

  • 2D
  • 3D

Selezione immagine

Chiudi