• 10 milioni di componenti
  • Spedizione in giornata per 30.000 articoli
  • Prezzi competitivi

I nostri uffici sono aperti lun.- giov. 8:00 - 17:00, ven. 8:00-16:00 (GMT+2)

Ricerca per categoria
o fornitore

Ricerca per categoria
Componenti meccanici
Viti, bulloni, rondelle, dadi
Materiali industriali
Materiale elettrico
Controlli e parti per PC
Utensili da taglio
Materiali industriali
Materiali per imballaggio
Materiale sanitario, per uffici, per antinfortunistica
Materiali per R&D e camera bianca
Componenti per stampi deformazione lamiera
Componenti per stampi iniezione plastica

Ricerca per fornitore
Lista fornitori

Cutter / Testa fresante indicizzabile

  • Numero di dati da visualizzare
    30
    45
    60
  • Ordina
Giorni spedizione
  • Tutti gli articoli
  • 3 giorni o meno
  • 4 giorni o meno
  • 5 giorni o meno
  • 6 giorni o meno
  • 7 giorni o meno
  • 11 giorni o meno
  • 23 giorni o meno
    • Raccomandazione
    High-Efficiency Cutter, End Mill Model

    High-Efficiency Cutter, End Mill Model

    MISUMI

    A milling cutter that meets the conditions of the small outer diameter of φ10 as well as fine Z machining

    • Sconto volumi elevati
    A partire da
    161.50€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • CoroMill 390 Cutter

    CoroMill 390 Cutter

    SANDVIK

    Suitable for high efficiency machining.

    A partire da
    236.67€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Shoulder Milling Cutter, End Mill

    Shoulder Milling Cutter, End Mill

    MISUMI

    An end mill for shoulder milling that can be used for general purposes

    • Sconto volumi elevati
    A partire da
    94.00€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Plane Milling Cutter, End Mill Model

    Plane Milling Cutter, End Mill Model

    MISUMI

    High-precision plane milling cutter with the cutting angle of 45°

    • Sconto volumi elevati
    A partire da
    181.50€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Plane Milling Cutter, Arbor Mounting Model

    Plane Milling Cutter, Arbor Mounting Model

    MISUMI

    High-precision plane milling cutter with the cutting angle of 45°

    • Sconto volumi elevati
    A partire da
    222.00€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Plane Milling Cutter / Arbor Mounting Model

    Plane Milling Cutter / Arbor Mounting Model

    MISUMI

    The classic face mill with ISO tip has been redesigned

    • Sconto volumi elevati
    A partire da
    290.00€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Side Cutter, Milling Cutter, Front Milling Cutter

    Side Cutter, Milling Cutter, Front Milling Cutter

    SANDVIK

    Suitable for high efficiency machining.

    A partire da
    535.83€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Multi-Functional Cutter, End Mill Model

    Multi-Functional Cutter, End Mill Model

    MISUMI

    A multi-functional cutter with long flute length that's capable of drilling

    • Sconto volumi elevati
    A partire da
    131.00€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • G2 Shell End Mill for MCS MC

    G2 Shell End Mill for MCS MC

    ASAHI TOOLS

    Used by Insertion of Large Diameter φ50-100 EM Main Body (Blade) into an Arbor

    • Sconto volumi elevati
    A partire da
    286.82€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • SEC-Multi Mill CHE-R Model

    SEC-Multi Mill CHE-R Model

    SUMITOMO ELECTRIC HARDMETAL

    For corner shaving of steel, cast iron and stainless steel

    A partire da
    101.25€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • SEC-Wave Mill WEX2000E / EL Type

    SEC-Wave Mill WEX2000E / EL Type

    SUMITOMO ELECTRIC HARDMETAL

    Special surface treatment improves both corrosion and abrasion resistance. Increased screw size improves clamp strength and durability.

    A partire da
    111.82€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Shoulder Milling Cutter, End Mill Model

    Shoulder Milling Cutter, End Mill Model

    MISUMI

    A general-purpose shoulder milling cutter with the ISO tip

    • Sconto volumi elevati
    A partire da
    153.26€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • High-Feed Radius Cutter (5-Corner Model), End Mill Model

    High-Feed Radius Cutter (5-Corner Model), End Mill Model

    MISUMI

    High feed radius that combines the efficiency and versatility

    • Sconto volumi elevati
    A partire da
    245.00€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • SEC-T Slot End Mill

    SEC-T Slot End Mill

    SUMITOMO ELECTRIC HARDMETAL

    For T Slot Processing

    A partire da
    158.72€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Roughing Ball Cutter, End Mill Model

    Roughing Ball Cutter, End Mill Model

    MISUMI

    Stable processing is made possible by the geometry and tip material that have the excellent cutting performance

    • Sconto volumi elevati
    A partire da
    235.00€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • SEC Arbor for Modular Tool MA-M-L-C Carbide Arbor

    SEC Arbor for Modular Tool MA-M-L-C Carbide Arbor

    SUMITOMO ELECTRIC HARDMETAL

    A variety of combinations corresponding with carbide arbor and steel arbor. It can be easily exchanged with screw stopper type.

    A partire da
    303.22€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Multi-Functional Square Cutter, End Mill Model

    Multi-Functional Square Cutter, End Mill Model

    MISUMI

    It has the flexibility to handle any processing such as drilling, engravings to grooving

    • Sconto volumi elevati
    A partire da
    315.31€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Finishing Ball Cutter, End Mill Model

    Finishing Ball Cutter, End Mill Model

    MISUMI

    19 sizes with the shank material that can be selected depending on the application

    • Sconto volumi elevati
    A partire da
    201.59€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Multi-Functional Cutter, End Mill Model

    Multi-Functional Cutter, End Mill Model

    MISUMI

    It flexibly supports a wide range of sizes and various cutting conditions, with the arbor mounting type also available

    • Sconto volumi elevati
    A partire da
    342.76€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • High-Speed Cutter for Aluminum

    High-Speed Cutter for Aluminum

    SUMITOMO ELECTRIC HARDMETAL

    High performance light-weight cutter that can do rough processing to finishing processing of aluminum alloys and nonferrous metals.

    A partire da
    856.69€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • For SEC-Wave Mill WGC Type WGC-EW

    For SEC-Wave Mill WGC Type WGC-EW

    SUMITOMO ELECTRIC HARDMETAL

    A general use cutter with a wide range of uses and world beater level performance and machining precision.

    A partire da
    136.91€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • SEC-Wave Ball (Short Blade Type for Roughing) WBMR2000 Model

    SEC-Wave Ball (Short Blade Type for Roughing) WBMR2000 Model

    SUMITOMO ELECTRIC HARDMETAL

    Sharpen wave-shaped blade with a low resistance and high rake angle. Robust detent mechanism for suppressing the chip movement during cutting.

    A partire da
    176.71€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • SEC-Light Mill

    SEC-Light Mill

    SUMITOMO ELECTRIC HARDMETAL

    For corner shaving of steel, cast iron and stainless steel

    A partire da
    101.25€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Shoulder Milling Cutter, Arbor Mounting Model

    Shoulder Milling Cutter, Arbor Mounting Model

    MISUMI

    A general-purpose shoulder milling cutter with the ISO tip

    • Sconto volumi elevati
    A partire da
    364.17€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • SEC-Wave Mill Head WEX2000M Model

    SEC-Wave Mill Head WEX2000M Model

    SUMITOMO ELECTRIC HARDMETAL

    A variety of combinations corresponding with carbide arbor and steel arbor. It can be easily exchanged with screw stopper type.

    A partire da
    139.08€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • For SEC-Wave Mill WEX Type WEX-E

    For SEC-Wave Mill WEX Type WEX-E

    SUMITOMO ELECTRIC HARDMETAL

    Special surface treatment improves both corrosion and abrasion resistance. Increased screw size improves clamp strength and durability.

    A partire da
    137.45€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • For SEC-Wave Mill WGC Type WGC-R

    For SEC-Wave Mill WGC Type WGC-R

    SUMITOMO ELECTRIC HARDMETAL

    A general use cutter with a wide range of uses and world beater level performance and machining precision.

    A partire da
    239.42€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Phoenix Series Round Cutters Straight Shank Type

    Phoenix Series Round Cutters Straight Shank Type

    OSG

    Indexable Tools with high rigidity body and inserts.

    A partire da
    190.72€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • For SEC-Wave Mill WFX Type WFX-E

    For SEC-Wave Mill WFX Type WFX-E

    SUMITOMO ELECTRIC HARDMETAL

    4 corner usable screw fastening method cutter. An ideal blade shape means good wall accuracy can be obtained.

    A partire da
    235.06€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • For SEC-Wave Mill WGX Type WGX-R(S)

    For SEC-Wave Mill WGX Type WGX-R(S)

    SUMITOMO ELECTRIC HARDMETAL

    Dedicated breaker achieves low resistance. For general machining of steel / cast iron.

    A partire da
    185.98€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • SEC-Wave Ball (for Finishing) WBMF1000 Model

    SEC-Wave Ball (for Finishing) WBMF1000 Model

    SUMITOMO ELECTRIC HARDMETAL

    Adopts ingenious high precision clamp method. Good in sharpness and even in finishing of surface roughness. By adopting Super ZX coat, provides excellent abrasion resistance.

    A partire da
    90.01€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • SEC-Sumi Power Mill for PWS Series PWSF-R

    SEC-Sumi Power Mill for PWS Series PWSF-R

    SUMITOMO ELECTRIC HARDMETAL

    Vertical insert equipped with high reliability corner shaving cutters that combine high cutting edge power and sharpness.

    A partire da
    524.06€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • For SEC-Wave Mill WFX Type WFX-R

    For SEC-Wave Mill WFX Type WFX-R

    SUMITOMO ELECTRIC HARDMETAL

    4 corner usable screw fastening method cutter. An ideal blade shape means good wall accuracy can be obtained.

    A partire da
    191.44€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Shoulder Milling Cutter, Arbor Mounting Model

    Shoulder Milling Cutter, Arbor Mounting Model

    MISUMI

    An end mill for shoulder milling that can be used for general purposes

    • Sconto volumi elevati
    A partire da
    199.00€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Multi-Functional Cutter, End Mill Model

    Multi-Functional Cutter, End Mill Model

    MISUMI

    It flexibly supports a wide range of sizes and various cutting conditions, with the arbor mounting type also available

    • Sconto volumi elevati
    A partire da
    280.36€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Swing Ball, Model SWB, G-BODY Series

    Swing Ball, Model SWB, G-BODY Series

    DIJET

    Excellent tool abrasion resistance.

    A partire da
    312.67€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Mirror Ball C Body BNM-S-C Shape

    Mirror Ball C Body BNM-S-C Shape

    DIJET

    Excellent tool abrasion resistance.

    A partire da
    192.00€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • SEC-Ace Mill for APG Series APG-R

    SEC-Ace Mill for APG Series APG-R

    SUMITOMO ELECTRIC HARDMETAL

    For general purpose and non-ferrous metal cutting

    A partire da
    389.02€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • High Feed Die Master SKS Type

    High Feed Die Master SKS Type

    DIJET

    Suitable for high efficiency machining.

    A partire da
    186.50€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • F4000 Series, High-Rigidity Face Mill F4033 Straight Shank Type

    F4000 Series, High-Rigidity Face Mill F4033 Straight Shank Type

    OSG

    F4000 series straight shank type that possess high rigidity.

    A partire da
    563.08€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Small Diameter Cutter Series Chamfering Cutter Straight Shank

    Small Diameter Cutter Series Chamfering Cutter Straight Shank

    OSG

    Shank type versatile chamfer cutter

    A partire da
    400.00€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Phoenix Series Ball End Mills for Finishing

    Phoenix Series Ball End Mills for Finishing

    OSG

    For finishing. Does not gouge flat areas and is equally good on all working surfaces.

    A partire da
    192.83€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Ball End Mills, Bravo Mills (2-Flute Type)

    Ball End Mills, Bravo Mills (2-Flute Type)

    OSG

    Highly rigid 2-flute type ball end mill. Tip use without distinction to parent or child blade.

    A partire da
    421.42€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • CoroMill 245 Cutter

    CoroMill 245 Cutter

    SANDVIK

    Suitable for high efficiency machining.

    A partire da
    153.50€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Sumiboron BN Finish EASY FMU, for FMU Type FMU-R

    Sumiboron BN Finish EASY FMU, for FMU Type FMU-R

    SUMITOMO ELECTRIC HARDMETAL

    For High Speed Finishing of Cast Iron

    A partire da
    1,003.92€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

Configura

Ripristina

Limitare la ricerca specificando Spec./Dim.

  • Machining Application

  • blade diameter D(φ)

    • 6
    • 7
    • 8
    • 10
    • 10mm
    • 11.68mm
    • 12
    • 12mm
    • 13.2
    • 13.4
    • 14
    • 15
    • 15mm
    • 15.4
    • 16
    • 16mm
    • 16.2
    • 17
    • 18
    • 18mm
    • 18.2
    • 18.4
    • 18.9
    • 20
    • 20mm
    • 20.2
    • 21
    • 22
    • 22mm
    • 23.2
    • 23.4
    • 23.8
    • 24
    • 24mm
    • 25
    • 25mm
    • 26
    • 28
    • 28mm
    • 28.2
    • 30
    • 30mm
    • 30.7
    • 32
    • 32mm
    • 32.5mm
    • 33
    • 33.4
    • 34
    • 35
    • 35mm
    • 36
    • 36.47mm
    • 37
    • 38
    • 38.2
    • 39
    • 40
    • 40(42.9)
    • 40mm
    • 40.7
    • 42
    • 42mm
    • 43
    • 44
    • 44mm
    • 46.4
    • 47
    • 48.7
    • 50
    • 50 (52.9)
    • 50mm
    • 51
    • 51.2
    • 52
    • 52mm
    • 53.7
    • 54mm
    • 54.08mm
    • 55
    • 56.7mm
    • 60
    • 61.7
    • 62.5mm
    • 63
    • 63 (65.9)
    • 63mm
    • 63.4
    • 64
    • 64.08mm
    • 65
    • 66
    • 66mm
    • 68
    • 69.7mm
    • 70
    • 72
    • 75
    • 75.5mm
    • 77.08mm
    • 78.08mm
    • 78.7
    • 80
    • 80 (82.9)
    • 80mm
    • 83.4
    • 84
    • 84mm
    • 86.7mm
    • 88
    • 90
    • 92mm
    • 92.5mm
    • 94.08mm
    • 98.7
    • 98.8mm
    • 100
    • 100 (102.9)
    • 100mm
    • 101.3mm
    • 105
    • 106.7mm
    • 110
    • 112mm
    • 112.5mm
    • 114.08mm
    • 118.8mm
    • 123.7
    • 125
    • 125 (127.9)
    • 125mm
    • 130
    • 131.4mm
    • 131.7mm
    • 137.5mm
    • 138.8mm
    • 139.08mm
    • 140
    • 143.8mm
    • 145.2mm
    • 150
    • 157
    • 160
    • 160 (162.9)
    • 160mm
    • 166.4mm
    • 166.7mm
    • 172.5mm
    • 174.08mm
    • 178.8mm
    • 180
    • 180.2mm
    • 200
    • 200 (202.9)
    • 200mm
    • 205.6mm
    • 212.5mm
    • 214.08mm
    • 218.8mm
    • 220.2mm
    • 250
    • 250 (252.9)
    • 250mm
    • 255.6mm
    • 262.5mm
    • 264.08mm
    • 268.8mm
    • 315
  • work material

  • Mounting Method

  • Finish category

  • Overall length (L)(mm)

    • 26~27
      • 26
      • 27
    • 32~38
      • 32
      • 33
      • 35
      • 38
    • 40~49
      • 40
      • 42
      • 43
      • 45
      • 49
    • 50~57
      • 50
      • 53
      • 54
      • 55
      • 56
      • 57
    • 60~68
      • 60
      • 63
      • 68
    • 70~77.7
      • 70
      • 73
      • 74
      • 75
      • 76
      • 77.7
    • 80~88
      • 80
      • 81
      • 82
      • 83
      • 84
      • 84.7
      • 85
      • 88
    • 90~98.7
      • 90
      • 91
      • 92
      • 93
      • 95
      • 98
      • 98.7
    • 100~109
      • 100
      • 104
      • 105
      • 107
      • 108
      • 109
    • 110~117
      • 110
      • 111
      • 112
      • 115
      • 117
    • 120~127
      • 120
      • 121
      • 123
      • 123.5
      • 124
      • 125
      • 125.2
      • 126
      • 127
    • 130~137
      • 130
      • 131
      • 132
      • 133
      • 134
      • 134.6
      • 135
      • 137
    • 140~147.5
      • 140
      • 141
      • 144
      • 145
      • 145.2
      • 147
      • 147.5
    • 150~155
      • 150
      • 155
    • 160~166
      • 160
      • 161
      • 165
      • 166
    • 170~175
      • 170
      • 171
      • 173
      • 175
    • 180~186
      • 180
      • 184.6
      • 185
      • 186
    • 190~191
      • 190
      • 191
    • 200~207
      • 200
      • 203.8
      • 207
    • 210~217
      • 210
      • 215
      • 217
    • 220~228
      • 220
      • 221
      • 223.8
      • 224
      • 228
    • 230~232
      • 230
      • 232
    • 240~249.5
      • 240
      • 243.8
      • 245
      • 247
      • 248
      • 249.5
    • 250~258
      • 250
      • 256
      • 257
      • 258
    • 260~268
      • 260
      • 262
      • 268
    • 270~278
      • 270
      • 275
      • 278
    • 280~284
      • 280
      • 284
    • 290~299.5
      • 290
      • 299.5
    • 300~306
      • 300
      • 306
    • 329
    • 350
  • Shank diameter (d)(mm)

    • MT5
    • MT5-M16
    • MT5-M24
    • 6
    • 8
    • 8.5
    • 10
    • 10.5
    • 12
    • 12.5
    • 15
    • 16
    • 17
    • 18
    • 20
    • 22
    • 23
    • 25
    • 25.4
    • 27
    • 28
    • 31.75
    • 31.8
    • 32
    • 35
    • 38.1
    • 40
    • 42
    • 44
    • 47.6
    • 47.62
    • 47.625
    • 50
    • 50.8
    • CN50.8
    • 55
    • 60
    • 180
    • 210
  • Number of flutes(sheet)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 8/2
    • 9
    • 10
    • 11
    • 12
    • 14
    • 15
    • 16
    • 16/4
    • 18
    • 20
    • 22
    • 24
    • 26
    • 28
    • 32
    • 36
  • Compatible Tip Material

  • Maximum Cutting Depth (Ad)(mm)

    • 0.1~0.4
    • 0.5
    • 0.7
    • 1
    • 1.2
    • 1.5
    • 2
    • 2.4
    • 2.5
    • 3
    • 3 (When using Sumidia Indexable Inserts), 10 (When using super hard tip)
    • 4
    • 5
    • 5.5
    • 5.7
    • 5.8
    • 6
    • 6 (SNMT/SNET Tip) / 3 (ONMT/ONET Tip)
    • 6.5
    • 7
    • 7.5
    • 7.9/8.08
    • 8
    • 8~19
    • 8.5
    • 8.9
    • 9
    • 9 to 22
    • 9.5
    • 9.6/9.99
    • 10
    • 10.7
    • 10.8
    • 11
    • 13
    • 14
    • 14.4
    • 14.5
    • 15
    • 15.4
    • 15.7
    • 16
    • 16–18
    • 17
    • 17~35
    • 17.9
    • 18
    • 18~36
    • 19
    • 20
    • 20~47
    • 22
    • 22.3
    • 23
    • 24
    • 26.9
    • 27
    • 28.6
    • 29.5
    • 30
    • 30~69
    • 35
    • 36
    • 36.5
    • 39
    • 41
    • 44
    • 44.6
    • 53
    • 57
  • Underneck length (ℓ1)(mm)

    • 4
    • 9
    • 10
    • 11
    • 15
    • 18
    • 18.5
    • 20
    • 21
    • 22
    • 22.5
    • 23
    • 24
    • 25
    • 25.7
    • 27
    • 28
    • 30
    • 30.5
    • 32
    • 32.7
    • 33
    • 34
    • 35
    • 36
    • 37.8
    • 40
    • 40.7
    • 41
    • 45
    • 48
    • 49
    • 50
    • 53
    • 54
    • 55
    • 56
    • 60
    • 62.5
    • 63
    • 64
    • 65
    • 69
    • 70
    • 72
    • 73
    • 75
    • 80
    • 82
    • 84
    • 85
    • 88
    • 90
    • 95
    • 96
    • 100
    • 105
    • 110
    • 120
    • 124
    • 125
    • 130
    • 137.5
    • 140
    • 145
    • 150
    • 165
    • 170
    • 176
    • 180
    • 184
    • 190
    • 200
    • 250

Limitare la ricerca specificando il produttore

Marchio

Prodotti MISUMI
  • Prodotti convenienti
Prodotti commerciali MISUMI

Limitare la ricerca specificando Tipo dati CAD

  • 2D
  • 3D

Selezione immagine

Chiudi