• 10 milioni di componenti
  • Spedizione in giornata per 30.000 articoli
  • Prezzi competitivi

I nostri uffici sono aperti lun.- giov. 8:00 - 17:00, ven. 8:00-16:00 (GMT+2)

Ricerca per categoria
o fornitore

Ricerca per categoria
Componenti meccanici
Viti, bulloni, rondelle, dadi
Materiali industriali
Materiale elettrico
Controlli e parti per PC
Utensili da taglio
Materiali industriali
Materiali per imballaggio
Materiale sanitario, per uffici, per antinfortunistica
Materiali per R&D e camera bianca
Componenti per stampi deformazione lamiera
Componenti per stampi iniezione plastica

Ricerca per fornitore
Lista fornitori

Maschio a punta(pagina2)

  • Numero di dati da visualizzare
    30
    45
    60
  • Ordina
Giorni spedizione
  • Tutti gli articoli
  • 3 giorni o meno
  • 4 giorni o meno
  • 5 giorni o meno
  • 6 giorni o meno
  • Long Neck Jet Taps

    Long Neck Jet Taps

    ISHIHASHI

    Long Neck Type for Through Hole Machining

    A partire da
    16.95€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT

    Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT

    OSG

    Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

    A partire da
    27.13€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • High-Carbon Steel Point Tap HC+PO/HC-PO

    High-Carbon Steel Point Tap HC+PO/HC-PO

    YAMAWA MFG

    Suitable for tapping high carbon steel like S55C etc.

    • Sconto volumi elevati
    A partire da
    7.70€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Point Tap Series, V Coating, Long Shank, V-LT-POT

    Point Tap Series, V Coating, Long Shank, V-LT-POT

    OSG

    Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping

    A partire da
    22.83€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Point Tap Series, Ultra Synchronizing Taps for Aluminum, HS-AL-RFT

    Point Tap Series, Ultra Synchronizing Taps for Aluminum, HS-AL-RFT

    OSG

    Can conduct high speed / high precision thread cutting of aluminum and aluminum alloys when used exclusively with tools equipped with complete lead feeding machinery.

    • Sconto volumi elevati
    A partire da
    11.81€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Machine Nut Taps for Coarse Screws

    Machine Nut Taps for Coarse Screws

    SKC

    Left Screw, Right Screw

    A partire da
    11.13€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT

    Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT

    OSG

    In applying HR coating with high welding-resisting properties on nickel based alloys, it achieves a long operating life even on aging nickel based alloys (40-45 HRC)

    A partire da
    21.93€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Insert Screw Tap Series, Point Tap EX-HL-POT

    Insert Screw Tap Series, Point Tap EX-HL-POT

    OSG

    Used For Threading of Screws Used for in Through Holes Inserts (Helical Coil)

    • Sconto volumi elevati
    A partire da
    13.95€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Nut Taps NT

    Nut Taps NT

    YAMAWA MFG

    Straight shaped nut type primarily for working on nuts on thread cutting boards.

    • Sconto volumi elevati
    A partire da
    23.15€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Plus Series Point Tap Oxidation Treatment, +PO-OX (N+PO-OX)

    Plus Series Point Tap Oxidation Treatment, +PO-OX (N+PO-OX)

    YAMAWA MFG

    *N+PO-OX will be replaced with +PO-OX as soon as there is no more in stock.

    • Sconto volumi elevati
    A partire da
    7.27€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

  • Point Tap Series, for Copper, CU-POT

    Point Tap Series, for Copper, CU-POT

    OSG

    Treated With CRN Coating Which Shows Excellent Friction Resistance and Anti-Sticking Properties Against Copper and Use of HSSE as Material Allows Long Lived Machining on Copper

    • Sconto volumi elevati
    A partire da
    16.82€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • General Point Taps

    General Point Taps

    SKC

    Homo-treated Process

    A partire da
    11.63€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • G Gun Tap GGN

    G Gun Tap GGN

    NACHI(FUJIKOSHI)

    Can do high speed / high efficiency threading of through holes in everything from standard steel to difficult to grind materials.

    A partire da
    15.37€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • T Gun Tap for Stainless Steel TGNS

    T Gun Tap for Stainless Steel TGNS

    NACHI(FUJIKOSHI)

    Suited for through hole screw machining on stainless steel and heat resistant steel.

    A partire da
    8.86€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Insert Screw Tap Series, Point Tap, Long Shank, HL-LT-POT

    Insert Screw Tap Series, Point Tap, Long Shank, HL-LT-POT

    OSG

    Used For Threading of Screws Used for in Through Holes Inserts (Helical Coil)

    • Sconto volumi elevati
    A partire da
    19.32€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Super Hard Taps for Super High Speed, for Cast Iron and Bind Holes, HFICT-B

    Super Hard Taps for Super High Speed, for Cast Iron and Bind Holes, HFICT-B

    YAMAWA MFG

    Uses a carbide tap with a center through hole shape that supports low temperature cool dry machining, and internally lubricating and mist systems through ultra high speed carbide tapping. It is suitable for blind hole of cast iron.

    • Sconto volumi elevati
    A partire da
    106.33€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Point Tap Series, Ultra Synchronizing Taps, HS-RFT

    Point Tap Series, Ultra Synchronizing Taps, HS-RFT

    OSG

    Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

    • Sconto volumi elevati
    A partire da
    20.22€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Short Point Tap for Deep Hole S-PO

    Short Point Tap for Deep Hole S-PO

    YAMAWA MFG

    Effective in deep hole tapping of more than 2.5 times the nominal diameter, with less frictional resistance due to short length of the threaded portion, and good cutting oil supplying.

    A partire da
    8.33€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • G Gun Tap, Long Shank GGNL

    G Gun Tap, Long Shank GGNL

    NACHI(FUJIKOSHI)

    The standard size is used when the protruding length is insufficient.

    A partire da
    27.85€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT

    Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT

    OSG

    Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

    • Sconto volumi elevati
    A partire da
    18.72€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Point Taps (Meter Screws)

    Point Taps (Meter Screws)

    TRUSCO NAKAYAMA

    [Features] High-speed tapping is possible. Homogenization treated. [Use] For through hole machining. Work materials: general steel, low to cedium carbon steel, alloy steel.

    A partire da
    8.55€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Super Hard Taps for Super High Speed, for Aluminum Cast Iron and Through Holes, HFACT-P

    Super Hard Taps for Super High Speed, for Aluminum Cast Iron and Through Holes, HFACT-P

    YAMAWA MFG

    Uses a carbide tap with a side through hole shape that supports low temperature cool dry machining, and internally lubricating and mist systems through ultra high speed carbide tapping. It is suitable for through holes of aluminum cast iron and aluminum die-casting.

    • Sconto volumi elevati
    A partire da
    106.33€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Long Jet Taps

    Long Jet Taps

    ISHIHASHI

    Cutting torque is extremely light for shear cutting, due to spiral cutting edge and large angle.

    A partire da
    11.92€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Point Tap Series, with Oil Holes, OIL-POT

    Point Tap Series, with Oil Holes, OIL-POT

    OSG

    Effective for horizontal work on through holes and machining deep holes. Oil Hole Allows Cutting Lubricant to be Applied to the Cutting Edge and Peform High Speed and High Accuracy Tapping

    • Sconto volumi elevati
    A partire da
    14.62€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Point Tap Series, Ultra Synchronizing Taps, US-AL-RFT
    A partire da
    17.82€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Super Hard Taps for Super High Speed, for Cast Iron and Through Holes, HFICT-P

    Super Hard Taps for Super High Speed, for Cast Iron and Through Holes, HFICT-P

    YAMAWA MFG

    Uses a carbide tap with a side through hole shape that supports low temperature cool dry machining, and internally lubricating and mist systems through ultra high speed carbide tapping. It is suitable for through holes of cast iron.

    • Sconto volumi elevati
    A partire da
    106.33€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT

    Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT

    OSG

    Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

    • Sconto volumi elevati
    A partire da
    22.83€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Point Tap Series, High Speed Synchronizing Taps with Oil Holes for Steel, VPO-US-POT

    Point Tap Series, High Speed Synchronizing Taps with Oil Holes for Steel, VPO-US-POT

    OSG

    Can Perform Tapping of the S45C at Speeds of 50M / MIN and Above

    A partire da
    30.14€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT

    Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT

    OSG

    Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

    • Sconto volumi elevati
    A partire da
    21.73€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Parallel Tap Series for Pipes Point Tap EX-POT-SPT
    A partire da
    17.22€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Y - Series General Purpose Point Tap PO - Y

    Y - Series General Purpose Point Tap PO - Y

    YAMAWA MFG

    Suitable for screw machining in simple mounting of thin iron plates such as SPC, SPH and mild steel below SS400, S20C.

    A partire da
    7.76€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

Configura

Ripristina

Limitare la ricerca specificando Spec./Dim.

  • Thread Types

  • Thread Size (Nominal)

    • CTG-54
    • CTG-51
    • CTG-42
    • CTG-39
    • CTG-36
    • CTG-31
    • CTG-28
    • CTG-25
    • CTG-22
    • CTG-19
    • CTG-16
    • CTG-15
    • No.0-80UNF
    • No0UN
    • S0.1
    • S0.2
    • S0.3
    • S0.4
    • S0.5
    • S0.6
    • S0.7
    • S0.8
    • S0.9
    • 1"1/16U
    • 1"1/16UN
    • 1"1/2"UN
    • 1"1/2U
    • 1"1/2UN
    • 1"1/4"UN
    • 1"1/4U
    • 1"1/4UN
    • 1"1/8"UN
    • 1"1/8U
    • 1"1/8UN
    • 1"3/16U
    • 1"3/16UN
    • 1"3/4U
    • 1"3/4UN
    • 1"3/8"UN
    • 1"3/8U
    • 1"3/8UN
    • 1"5/16U
    • 1"5/16UN
    • 1"5/8U
    • 1"5/8UN
    • 1"7/8UN
    • 1' -11
    • 1' 1/2-11
    • 1' 1/4-11
    • 1'-11
    • 1'-11.5
    • 1'-12UNF
    • 1'-8UNC
    • 1'1/2-11
    • 1'1/4-11
    • 1'8UNC
    • 1'W8
    • 1-16-27
    • 1/16-27
    • 1/16-28
    • 1/2-13 UNC
    • 1/2-14
    • 1/2-20 UNF
    • 1/2UN
    • 1/2UNJ
    • 1/2W12
    • 1/4-18
    • 1/4-19
    • 1/4-20 UNC
    • 1/4-28 UNC
    • 1/4-28 UNF
    • 1/4UN
    • 1/4UNJ
    • 1/4W20
    • 1/8-18
    • 1/8-27
    • 1/8-28
    • 1/8N
    • 1/8SM44
    • 1/8UN
    • 1/8W40
    • 1UN
    • 1UNS
    • BC1
    • BSF1"1/2
    • BSF1"3/4
    • BSF1"3/8
    • BSF1"5/8
    • BSF1"7/8
    • G1
    • G1"1/2
    • G1"1/4
    • G1"1/8
    • G1"3/4
    • G1"3/8
    • G1/16
    • G1/2
    • G1/4
    • G1/8
    • G1PF
    • M1
    • M1~10
    • M1~6
    • NO.1-72UNF
    • NPS1
    • NPS1"1/2
    • NPS1"1/4
    • NPS1"1/8
    • NPS1"3/4
    • NPS1/16
    • NPS1/2
    • NPS1/4
    • NPS1/8
    • NPT1
    • NPT1"1/2
    • NPT1"1/4
    • NPT1"1/8
    • NPT1"3/4
    • NPT1/16
    • NPT1/2
    • NPT1/4
    • NPT1/8
    • No1UN
    • PF1
    • PF1/2
    • PF1/4
    • PF1/8
    • PS1
    • PS1"1/2
    • PS1"1/4
    • PS1"1/8
    • PS1"3/8
    • PS1/2
    • PS1/2-14
    • PS1/4
    • PS1/4-19
    • PS1/8
    • PS1/8-28
    • PT1'-11
    • PT1/2-14
    • PT1/4-19
    • PT1/8-28
    • R1
    • R1"1/2
    • R1"1/4
    • R1"1/8
    • R1"3/4
    • R1"3/8
    • R1/16
    • R1/2
    • R1/4
    • R1/8
    • Rc1
    • Rc1/2
    • Rc1/4
    • Rc1/8
    • Rp1
    • Rp1"1/2
    • Rp1"1/4
    • Rp1"3/4
    • Rp1/16
    • Rp1/2
    • Rp1/4
    • Rp1/8
    • S1
    • SM1/2
    • SM1/4
    • SM1/8
    • W1
    • W1"1/16
    • W1"1/2
    • W1"1/4
    • W1"1/8
    • W1"3/16
    • W1"3/4
    • W1"3/8
    • W1"5/16
    • W1"5/8
    • W1"7/8
    • W1/16
    • W1/2
    • W1/4
    • W1/8
    • M1.1
    • M1.2
    • S1.2
    • BC1.37
    • M1.4
    • S1.4
    • M1.5
    • M1.6
    • M1.7
    • M1.8
    • 2"1/2UN
    • 2"1/4UN
    • 2"3/4UN
    • 2' -11
    • 2'-11
    • 2U
    • 2UN
    • BSF2
    • BSF2"1/4
    • G2
    • G2"1/2
    • M2
    • M2~10
    • M2~4.5
    • M2~8
    • NPS2
    • NPS2"1/2
    • NPS2"1/4
    • NPT2
    • NPT2"1/2
    • NPT2"1/4
    • No.2-56UNC
    • No.2-64UNC
    • No2UN
    • R2
    • R2"1/2
    • Rp2
    • Rp2"1/2
    • W/2
    • W2
    • W2"1/2
    • W2"1/4
    • W2"1/8
    • W2"3/4
    • W2"3/8
    • W2"7/8
    • M2.2
    • M2.3
    • M2.5
    • M2.6
    • 3"1/2UN
    • 3/16UN
    • 3/16W24
    • 3/4-10 UNC
    • 3/4-14
    • 3/4-16 UNF
    • 3/4UN
    • 3/4W10
    • 3/8-16 UNC
    • 3/8-18
    • 3/8-19
    • 3/8-24 UNF
    • 3/8-UNJ
    • 3/8UN
    • 3/8UNJ
    • 3/8W16
    • 3U
    • 3UN
    • BC3/8
    • G3
    • G3"1/2
    • G3/4
    • G3/8
    • M3
    • M3~10
    • M3~12
    • M3~5
    • M3~6
    • M3~8
    • NO.3-48UNC
    • NPS3
    • NPS3"1/2
    • NPS3/4
    • NPS3/8
    • NPT3
    • NPT3"1/2
    • NPT3/4
    • NPT3/8
    • No.3-56UNF
    • No3UN
    • PF3/4
    • PF3/4-14
    • PF3/8
    • PF3/8-19
    • PS3/4
    • PS3/8
    • PS3/8-19
    • PT3/4-14
    • PT3/8-19
    • R3
    • R3"1/2
    • R3/4
    • R3/8
    • Rc3/4
    • Rc3/8
    • Rp3
    • Rp3"1/2
    • Rp3/4
    • Rp3/8
    • SM3/16
    • SM3/32
    • SM3/8
    • W3
    • W3/16
    • W3/32
    • W3/4
    • W3/8
    • M3.5
    • 4UN
    • G4
    • M4
    • M4~10
    • M4~13
    • M4~14
    • M4~6
    • NO.4-48UNF
    • NPS4
    • NPT4
    • No.4-40UNC
    • No4UN
    • R4
    • Rp4
    • W4"1/2
    • M4.5
    • 5/16-18 UNC
    • 5/16-24 UNF
    • 5/16UN
    • 5/16UNJ
    • 5/16W18
    • 5/32UN
    • 5/8-11 UNC
    • 5/8-18 UNF
    • 5/8UN
    • 5/8W11
    • 5/W11
    • BC5/16
    • CTV5
    • G5/8
    • M5
    • M5~10
    • M5~12
    • M5~13
    • NO.5-40UNC
    • NPS5/8
    • NPT5/8
    • No.5-44UNC
    • No5UN
    • PS5/8
    • R5/8
    • SM5/16
    • W5/16
    • W5/32
    • W5/8
    • M5.5
    • M6
    • M6 – 20
    • NO.6-32UNC
    • No.6-40UNC
    • No6UN
    • No6UNJ
    • W6
    • M6.5
    • W6.8
    • 7/16-14 UNC
    • 7/16-20 UNF
    • 7/16UN
    • 7/16UNJ
    • 7/32UN
    • 7/8-14 UNF
    • 7/8-9 UNC
    • 7/8UN
    • 7/8W9
    • G7/8
    • NPS7/8
    • NPT7/8
    • PG7
    • PS7/8
    • R7/8
    • SM7/16
    • SM7/32
    • W"7/8
    • W7
    • W7/16
    • W7/32
    • W7/8
    • m7
    • M7.5
    • CTV8
    • M8
    • M8~12
    • NO.8-32UNC
    • No.8-36UNF
    • No8UN
    • No8UNJ
    • W8
    • M8.5
    • 9/16-18 UNF
    • 9/16UN
    • 9/64SM40
    • 9UN
    • BC9/16
    • M9
    • PG9
    • SM9/32
    • SM9/64
    • W9/16
    • M9.5
    • W9.5
    • W9.8
    • CTV10
    • M10
    • M10~13
    • M10~25
    • M10~30
    • No.10-24UNC
    • No.10-32UNC
    • No.10-32UNF
    • No10UN
    • No10UNJ
    • TM10
    • TW10
    • Tr10
    • W10
    • 11/64SM40
    • M11
    • PG11
    • SM11/32
    • SM11/64
    • W11
    • W11/16
    • M12
    • M]12
    • No.12-24UNC
    • No.12-28UNC
    • No12UN
    • TM12
    • TW12
    • W12
    • W12.5
    • M13
    • W13
    • PG13.5
    • W13.5
    • W13.8
    • M14
    • TM14
    • TW14
    • W14
    • M15
    • SM15/64
    • W15
    • W15/16
    • M16
    • PG16
    • TM16
    • TW16
    • Tr16
    • W16
    • M17
    • W17
    • M18
    • TM18
    • TW18
    • W18
    • M19
    • M19~32
    • M19~33
    • M19~38
    • M19~42
    • W19
    • M20
    • TM20
    • TW20
    • Tr20
    • W20
    • W20.32
    • M21
    • PG21
    • W21
    • M22
    • TM22
    • TW22
    • W22
    • M23
    • W23
    • M24
    • TM24
    • TW24
    • W24
    • M25
    • M25~50
    • M25~60
    • M25~70
    • M25~72
    • TM25
    • TW25
    • W25
    • M26
    • TM26
    • TW26
    • W26
    • M27
    • W27
    • M28
    • TM28
    • TW28
    • W28
    • M29
    • PG29
    • W29
    • M30
    • TM30
    • TW30
    • W30
    • M32
    • TM32
    • W32
    • M33
    • W33
    • M34
    • W34
    • M35
    • W35
    • M36
    • PG36
    • TM36
    • W36
    • M37
    • M38
    • W38
    • M39
    • W39
    • M40
    • TM40
    • W40
    • M42
    • M42~120
    • PG42
    • W42
    • M43
    • M44
    • W44
    • M45
    • W45
    • M46
    • M48
    • W48
    • M50
    • W50
    • M52
    • W52
    • M54
    • W54
    • M55
    • W55
    • M56
    • W56
    • M58
    • M60
    • W60
    • M62
    • W62
    • M64
    • M65
    • W65
    • M68
    • M70
    • W70
    • M72
    • M75
    • W75
    • M76
    • M78
    • M80
    • M82
    • M85
    • M90
    • M95
    • M100
    • M110
    • M115
    • M120
    • 06510X28R
    • 060163N050M
    • 060163N100M
    • 060163N125M
    • 065103X28G
    • 075203N150M
    • 080153X19G
    • 080153X19R
    • 090244N125M
    • 090244N175M
    • 100254N050M
    • 100254N100M
    • 100254N150M
    • 100254N200M
    • 120204X14G
    • 120204X14R
    • 120304N100M
    • 120304N150M
    • 120304N200M
    • 160264X11G
    • 160264X11R
    • 160404N150M
    • 160404N200M
    • 160404N250M
    • 200305X11G
    • 200305X11R
    • 200505N150M
    • 200505N200M
    • 200505N300M
  • Pitch (P), Thread Count(mm)

    • 0.025
    • 0.05
    • 0.08
    • 0.1
    • 0.125
    • 0.15
    • 0.175
    • 0.2
    • 0.225
    • 0.25
    • 0.3
    • 0.34
    • 0.35
    • 0.4
    • 0.45
    • 0.5
    • 0.6
    • 0.7
    • 0.75
    • 0.8
    • 0.9
    • 1
    • 1.25
    • 1.5
    • 1.5-2
    • 1.75
    • .02
    • 2
    • 2.5
    • 2.52
    • 3
    • 3 1/2
    • 3.5
    • 4
    • 4 1/2
    • 4.5
    • 5
    • 5.5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 11 1/2
    • 11/1/2
    • 11.5
    • 12
    • 13
    • 14
    • 16
    • 18
    • 19
    • 20
    • 24
    • 26
    • 27
    • 28
    • 30
    • 32
    • 36
    • 40
    • 44
    • 48
    • 56
    • 60
    • 64
    • 72
    • 80
  • Number of Chamfered Threads (Lcf)

    • 1 P
    • 1.5 P
    • 2 P
    • 2.5 P
    • 3 P
    • 3.5 P
    • 4 P
    • 4.5 P
    • 5 P
    • 6 P
    • 8 P
    • 9 P
    • 24 P
    • 25 P
    • 26 P
    • 27 P
    • 29 P
    • 30 P
  • Tool Material Type

  • Work Material

  • Tap Model

  • Bore Model

  • Coating Presence

  • Coating Type

  • Overall Length (L)(mm)

    • 30
    • 32
    • 34
    • 35
    • 36
    • 39
    • 40
    • 41.5
    • 42
    • 44
    • 45
    • 46
    • 48
    • 49
    • 50
    • 52
    • 54
    • 55
    • 57
    • 58
    • 59
    • 59.5
    • 60
    • 61
    • 61.5
    • 61.9
    • 62
    • 64
    • 65
    • 65.1
    • 66
    • 67
    • 68
    • 69
    • 70
    • 70/70/70
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 78
    • 79
    • 79.4
    • 80
    • 81
    • 82
    • 82.6
    • 83
    • 84
    • 85
    • 86
    • 87
    • 88
    • 89
    • 90
    • 91
    • 92
    • 95
    • 95.3
    • 96
    • 97
    • 99
    • 100
    • 101.6
    • 102
    • 105
    • 108
    • 109
    • 110
    • 111
    • 112
    • 114.3
    • 115
    • 119
    • 120
    • 121
    • 122
    • 123
    • 125
    • 127
    • 130
    • 133
    • 135
    • 139.7
    • 140
    • 144
    • 145
    • 146
    • 148
    • 150
    • 152
    • 152.4
    • 155
    • 158
    • 159
    • 160
    • 165
    • 167
    • 170
    • 175
    • 180
    • 184
    • 185
    • 188
    • 190
    • 195
    • 200
    • 204
    • 205
    • 210
    • 215
    • 216
    • 220
    • 225
    • 230
    • 235
    • 240
    • 245
    • 250
    • 255
    • 260
    • 265
    • 270
    • 275
    • 280
    • 290
    • 300
    • 310
    • 315
    • 320
    • 330
    • 340
    • 350
    • 370
    • 390
    • 410
    • 420
    • 435
    • 440
    • 450
    • 460
    • 500
    • 505
    • 525
    • 540
    • 590
    • 780
    • 890
    • 900
    • 1000
    • 1050
    • 1210
    • 1250
    • 1270
    • 1480

Limitare la ricerca specificando il produttore

Marchio

Prodotti MISUMI
  • Prodotti convenienti
Prodotti commerciali MISUMI

Limitare la ricerca specificando Tipo dati CAD

  • 2D
  • 3D

Selezione immagine

Chiudi