• 10 milioni di componenti
  • Spedizione in giornata per 30.000 articoli
  • Prezzi competitivi

I nostri uffici sono aperti lun.- giov. 8:00 - 17:00, ven. 8:00-16:00 (GMT+2)

Ricerca per categoria
o fornitore

Ricerca per categoria
Componenti meccanici
Viti, bulloni, rondelle, dadi
Materiali industriali
Materiale elettrico
Controlli e parti per PC
Utensili da taglio
Materiali industriali
Materiali per imballaggio
Materiale sanitario, per uffici, per antinfortunistica
Materiali per R&D e camera bianca
Componenti per stampi deformazione lamiera
Componenti per stampi iniezione plastica

Ricerca per fornitore
Lista fornitori

Chiave a tubo(pagina6)

  • Numero di dati da visualizzare
    30
    45
    60
  • Ordina
Giorni spedizione
  • Tutti gli articoli
  • 4 giorni o meno
  • 5 giorni o meno
  • 6 giorni o meno
  • 8 giorni o meno
  • 10 giorni o meno
  • Hexagon Socket Set (with Holder) HH410

    Hexagon Socket Set (with Holder) HH410

    MAEDAKINNZOKU

    10-piece set hand tool hexagon socket for tightening and loosening hex socket bolts and set screws whose popularity is increasing due to their space-saving characteristics. Drive: 12.7 mm, With Holder

    A partire da
    82.76€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Long Hexagon Socket Set (with Holder) HH308L

    Long Hexagon Socket Set (with Holder) HH308L

    MAEDAKINNZOKU

    8-piece set hand tool long hexagon socket for tightening and loosening hex socket bolts and set screws whose popularity is increasing due to their space-saving characteristics. Drive: 9.5 mm, With Holder

    A partire da
    77.67€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Deep Socket (Bihexagonal Type)

    Deep Socket (Bihexagonal Type)

    TRUSCO NAKAYAMA

    [Features] Non-chromic plating treatment is eco-friendly. With its 12-point design, work is easy. - Ideal for tightening nuts in deep places and nut with bolt sticking out. Material is chrome vanadium steel.

    A partire da
    7.70€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Ratchet Handle

    Ratchet Handle

    TRUSCO NAKAYAMA

    [Features] Equipped with a push button release function, so installing and removing sockets is easy. - Slim-type. Non-chromic plating (nickel plating) is eco-friendly. (The ball's surface treatment is hexavalent chromium) Handle section is angled about 13°and that allows avoiding obstacles while performing work. Adopting a 72-tooth gear, it realizes a 5° feed angle. Makes it possible to work in tight spaces. Material is chrome vanadium steel.

    A partire da
    23.77€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Extension Bar (12.7 mm Drive)

    Extension Bar (12.7 mm Drive)

    ASAHI METAL INDUSTRY

    [Features] Socket extension is most suitable for work where the place is narrow and deep and the handle is hard to operate. Material is chrome vanadium steel. [Applications] - Used as a joint of socket extension.

    A partire da
    10.26€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Socket Wrench Set (Drive 19.0 mm)

    Socket Wrench Set (Drive 19.0 mm)

    KO-KEN TOOL

    [Features] Socket wrench set for use in large machine maintenance.

    A partire da
    495.06€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Extension Bar (Drive 19.0 mm)

    Extension Bar (Drive 19.0 mm)

    KO-KEN TOOL

    [Features] Reliable torque transfer.

    A partire da
    23.26€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Socket Adapter (Drive 9.5 mm)

    Socket Adapter (Drive 9.5 mm)

    KO-KEN TOOL

    [Features] Different drive sockets can be plugged into a 9.5 mm drive handle with this adapter.

    A partire da
    11.91€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Ratchet Handle (Drive 12.7 mm)

    Ratchet Handle (Drive 12.7 mm)

    KO-KEN TOOL

    [Features] Long ratchet handle for high torque.

    A partire da
    58.86€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Ratchet Handle (Drive 19.0 mm)

    Ratchet Handle (Drive 19.0 mm)

    KO-KEN TOOL

    [Features] The grip doubles as pipe, reducing weight keeping it compact. Because the ratchet handle structure is supported by claws, left / right switchover is reliable. - The ends of the claws are in 2 steps, and the gears are supported at the surface of these 2 places.

    A partire da
    93.59€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Long T-type Tamper-proof Torx Bit Socket (Drive 6.3 mm)

    Long T-type Tamper-proof Torx Bit Socket (Drive 6.3 mm)

    KTC(KYOTO TOOL)

    [Features] Plug-in bits are replaceable. T-type tamper-proof shape and long type. The drive uses Power Fit to prevent concentration of stress. [Applications] - General-purpose Tools

    A partire da
    13.27€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Universal Joint

    Universal Joint

    KTC(KYOTO TOOL)

    [Features] The drive uses Power Fit to prevent concentration of stress. The compact design reduces to the limit the pin spacing of the joint. Maximum run-out angle per side is 45°. - Realized smooth movement and works in complicated location can be performed easily.

    A partire da
    19.10€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Ratchet Adapter (Drive 9.5 mm)

    Ratchet Adapter (Drive 9.5 mm)

    KTC(KYOTO TOOL)

    [Features] 60 teeth on the gear, feed angle is 6°. If combined with spinner handle it can be used as a ratchet handle. [Applications] - General-purpose Tools

    A partire da
    63.67€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Ratchet Handle (Drive 12.7 mm)

    Ratchet Handle (Drive 12.7 mm)

    KTC(KYOTO TOOL)

    [Features] Standard handle length for the standard type. 36-tooth gear. Union mechanism prevents inadvertent dropping of the socket. The integral claw has resulted in a compact head 20% smaller that our previous products. The 36-tooth gear not only gives fine feed rate, the two claw positions also mean a 30% increase in strength.

    A partire da
    45.80€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Ratchet Handle (Drive 19.0 mm)

    Ratchet Handle (Drive 19.0 mm)

    KTC(KYOTO TOOL)

    [Features] Standard elliptical ratchet handle. 40 teeth on the gear, feed angle is 9°. [Applications] - General-purpose Tools

    A partire da
    90.48€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Speeder Handle

    Speeder Handle

    KTC(KYOTO TOOL)

    [Features] For quick turning work. [Applications] - General-purpose Tools

    A partire da
    25.60€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Quick turning T-type wrench

    Quick turning T-type wrench

    KTC(KYOTO TOOL)

    [Features] Size stamped at the top of the handle, easy to confirm when it is suspended in the holder. The handle is shorter than most other products, so it is useful in a confined space. [Applications] - General-purpose Tools

    A partire da
    12.73€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Socket with Magnet (Drive 9.52 mm, Extension Type)

    Socket with Magnet (Drive 9.52 mm, Extension Type)

    NAGAHORI INDUSTRY

    [Features] Bolt exclusive extension type socket with magnet press-fitted. - For tightening bolts, it uses special steel with high durability.

    A partire da
    31.54€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Hex bit socket

    Hex bit socket

    SUEKAGE TOOL

    Use in conjunction with ratchet handles or spinner handles.

    A partire da
    5.04€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • T Slide Handle SL40

    T Slide Handle SL40

    MAEDAKINNZOKU

    Each drive slides on the handle, and can be freely used to fit positions. Handle with grooves to prevent the square drive from spinning free when force is applied. Also when the square drive comes to the middle, the stopper is activated.

    A partire da
    28.17€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Universal Joint

    Universal Joint

    MAEDAKINNZOKU

    Used in complex places where straight line work is not possible. By mounting between the handle and the socket, you can carry out work with the socket obliquely angled.

    A partire da
    17.42€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Impact Ball Joint (Short Type) NJ80S

    Impact Ball Joint (Short Type) NJ80S

    MAEDAKINNZOKU

    Connect between the socket and wrench to enable uses at an angle. Used in complex places where straight line work is not possible. Electroless plating for improved appearance and rust inhibition.

    A partire da
    81.72€
    Consegna da
    10 giorni

    *Prezzo unitario in configurazione base

  • Mixed socket wrench set

    Mixed socket wrench set

    MAEDAKINNZOKU

    Set of Standard, Deep, and Hexagon Types

    A partire da
    208.82€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Ratchet Handle: 171

    Ratchet Handle: 171

    MAEDAKINNZOKU

    Standard elliptical ratchet handle.

    A partire da
    30.18€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Quick Adapter QA-03

    Quick Adapter QA-03

    MAEDAKINNZOKU

    Attach between the ratchet handle and socket to enable rapid rotation by a fingertip. Hold the quick adapter down when the ratchet handle spins free to prevent bolt and nut from turning together.

    A partire da
    11.31€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Socket Holder SH306 to SH312L

    Socket Holder SH306 to SH312L

    MAEDAKINNZOKU

    Makes it possible to organize your sockets and joint pieces neatly. Impact sockets may be stored with the pin and O-ring attached. Rust resistant all stainless steel construction. Made to fold and be flexible, it does not slip out of place easily. Made with a screw hole, it can be hung on a wall or secured to a desk.

    A partire da
    7.78€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Socket Wrench Set (Full Set) 146

    Socket Wrench Set (Full Set) 146

    MAEDAKINNZOKU

    Useful for a wide variety of applications. Includes sockets, width across flat ranging from 5 to 41 mm and handles. Set of 6.35, 12.7, and 19.0 mm Drive Sockets

    A partire da
    629.46€
    Consegna da
    10 giorni

    *Prezzo unitario in configurazione base

  • Driver Bit Socket 3H-M2

    Driver Bit Socket 3H-M2

    MAEDAKINNZOKU

    9.5 mm Flat Head Driver Bit Socket Hand Tool

    A partire da
    8.51€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • O-ring for impact

    O-ring for impact [1-10 Pezzi per confezione]

    MAEDAKINNZOKU

    O-ring for socket replacement for impact.

    A partire da
    4.15€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Socket Set (Hexagonal / with Holder) HS206

    Socket Set (Hexagonal / with Holder) HS206

    MAEDAKINNZOKU

    The best hand tool socket for tightening & loosening hexagonal nuts & bolts. With socket holder. Drive: 6.35 mm, opposite side shape: Hexagonal

    A partire da
    35.83€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Socket Set (Hexagonal / with Holder) HS212

    Socket Set (Hexagonal / with Holder) HS212

    MAEDAKINNZOKU

    The best hand tool socket for tightening & loosening bihexagonal nuts & bolts. With socket holder. Drive: 6.35 mm, opposite side shape: Hexagonal

    A partire da
    66.13€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Socket Set (Hexagonal / with Holder) HS306

    Socket Set (Hexagonal / with Holder) HS306

    MAEDAKINNZOKU

    The best hand tool socket for tightening & loosening hexagonal nuts & bolts. With socket holder. Drive: 6.35 mm, opposite side shape: hexagonal

    A partire da
    34.58€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Socket Wrench Set 200

    Socket Wrench Set 200

    MAEDAKINNZOKU

    20 pcs socket set for large machinery, vehicle maintenance, construction, plant maintenance work, and so on.

    A partire da
    529.08€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Impact Socket Set (Metal Tray Case Spec) NV608S

    Impact Socket Set (Metal Tray Case Spec) NV608S

    MAEDAKINNZOKU

    Store impact sockets with pins and O-rings attached. Excellent durability and environmental adaptability compared to resin trays. Because each individual product is secured in a given place, it makes organizing tools easier, is stable and is rattle free.

    A partire da
    165.82€
    Consegna da
    8 giorni

    *Prezzo unitario in configurazione base

  • Hexagon Socket For Impact Drivers (Replaceable Type) 6AH-H

    Hexagon Socket For Impact Drivers (Replaceable Type) 6AH-H

    MAEDAKINNZOKU

    A hexagon socket for impact used in tightening and loosening of hexagon socket bolts and set screws, whose usage frequency is increasing due to the amount of space they save. Insertion Angle: 19. 0 mm Replacement Type

    A partire da
    30.86€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • T wrench TW

    T wrench TW

    MAEDAKINNZOKU

    For tightening and loosening work involving hex nuts and bolts. Overall length is long, so it is ideal for working in recessed, tight spaces. Heavy duty tightening made possible.

    A partire da
    12.80€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Extension Bar

    Extension Bar

    TRUSCO NAKAYAMA

    [Features] Non-chromic plating (nickel plating) is eco-friendly. (The ball's surface treatment is hexavalent chromium) Material is chrome vanadium steel. [Features] This is used as a socket extension in deep, tight spaces.

    A partire da
    5.34€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Impact Universal Joint

    Impact Universal Joint

    TRUSCO NAKAYAMA

    [Features] - Universal joint for power tool that has about 30°swing angle.

    A partire da
    27.34€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Ratchet Hammer (Drive 12.7 mm)

    Ratchet Hammer (Drive 12.7 mm)

    WERA

    [Features] Revolutionary sturdy ratchet handle which can be used as a hammer. Ratchet can withstand a load of over 600 N at least. At the same time, the 60-tooth gear and 6 feed angle give a smooth rotation.

    A partire da
    137.66€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Hexagon Socket Wrench Set (Drive 12.7 mm)

    Hexagon Socket Wrench Set (Drive 12.7 mm)

    ASAHI METAL INDUSTRY

    [Features] Standard hexagon socket. Material is chrome vanadium steel. [Applications] - Tightening Work Of Hex Socket Bolts / Hex Socket Set Screws

    A partire da
    95.38€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Socket Wrench (Hexagonal Type / Drive 12.7 mm)

    Socket Wrench (Hexagonal Type / Drive 12.7 mm)

    ASAHI METAL INDUSTRY

    [Features] The hexagonal shape fits the hexagonal bolt perfectly without damaging the nut or bolt. Material is chrome vanadium steel. JIS-compliant product. (Excluding VJR4200) [Applications] - Tightening Work Of Hexagon Nuts And Bolts

    A partire da
    5.65€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Socket Adapter (12.7 mm Drive)

    Socket Adapter (12.7 mm Drive)

    ASAHI METAL INDUSTRY

    [Features] Different sockets can be plugged into the drive with this adapter. Material is chrome vanadium steel. [Use] Different drive sockets can be plugged into a 12.7 mm drive handle with this adapter.

    A partire da
    10.68€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Nut Spinner Handle (12.7 mm Drive)

    Nut Spinner Handle (12.7 mm Drive)

    ASAHI METAL INDUSTRY

    [Features] The socket angle can be changed freely and used productively in deep spaces. Material is chrome vanadium steel. JIS-compliant product. [Applications] - Tighten hex bolts and nuts by connecting various sockets and attachment and sockets.

    A partire da
    29.06€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Y-type box wrench

    Y-type box wrench

    ASAHI METAL INDUSTRY

    [Features] - 1 tool tightens 3 sizes of nut & bolt. Material is S45C. [Applications] - Tightening Work Of Hexagon Nuts And Bolts

    A partire da
    9.92€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Socket Wrench Offset Handle (Drive 12.7 mm)

    Socket Wrench Offset Handle (Drive 12.7 mm)

    ASAHI METAL INDUSTRY

    [Features] The L shape lends itself to the exertion of force; plug into a socket to use. Material is chrome vanadium steel. [Applications] - Connects to various sockets and attachments, to tighten hexagon nuts and bolts.

    A partire da
    16.27€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

Configura

Ripristina

Limitare la ricerca specificando Spec./Dim.

Limitare la ricerca specificando Tipo dati CAD

  • 2D
  • 3D

Selezione immagine

Chiudi