• 10 milioni di componenti
  • Spedizione in giornata per 30.000 articoli
  • Prezzi competitivi

I nostri uffici sono aperti lun.- giov. 8:00 - 17:00, ven. 8:00-16:00 (GMT+2)

Ricerca per categoria
o fornitore

Ricerca per categoria
Componenti meccanici
Viti, bulloni, rondelle, dadi
Materiali industriali
Materiale elettrico
Controlli e parti per PC
Utensili da taglio
Materiali industriali
Materiali per imballaggio
Materiale sanitario, per uffici, per antinfortunistica
Materiali per R&D e camera bianca
Componenti per stampi deformazione lamiera
Componenti per stampi iniezione plastica

Ricerca per fornitore
Lista fornitori

Supporti specchio

  • Numero di dati da visualizzare
    30
    45
    60
  • Ordina
Giorni spedizione
  • Tutti gli articoli
  • 3 giorni o meno
  • 6 giorni o meno
  • 7 giorni o meno
  • 8 giorni o meno
  • 9 giorni o meno
  • 12 giorni o meno
  • 22 giorni o meno
  • 32 giorni o meno
  • 42 giorni o meno
  • Sostegno per specchio rettangolare

    Sostegno per specchio rettangolare

    SURUGA SEIKI

    [Features] - Holder for fastening square mirror, filter, projection plate and the like. - Use two screws to fasten. - Holder only for fastening. - Two types of holders with 60 mm and 100 mm width

    CAD
    2D3D
    A partire da
    55.78€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Sostegni per specchio Modello compatto (Con chiusura)

    Sostegni per specchio Modello compatto (Con chiusura)

    SURUGA SEIKI

    [Features] - A holder that fixes a small mirror up to ø 30 mm and finely adjust the tilt of the 2 axes (θy and θz) is made. - "Adhesive type" or "3-point support type" are available for the mirror installation method. - With the rod-less type, installation is done with M3 or M6 screws. - With three point support (F58N-30-2), it is possible to fix mirrors of ø 20 – ø 30 by changing the position of the pin for support on the bottom side. - The tilt fine adjustment knob can be affixed by the lock-nut at P = 0.5 mm.

    CAD
    2D3D
    A partire da
    98.20€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

  • Sostegni per vetro Gimbaled

    Sostegni per vetro Gimbaled

    SURUGA SEIKI

    A holder that is secured to elements such as a mirror, plate beam splitter or such, and that can adjust the tilt of the two shafts. The rotational center during slight motion and the center of the mirror are always integrated. [Features] - F50,F55 - A holder that is secured to elements such as a mirror, plate beam splitter or lens that can adjust the tilt (θy,θz). - If the clamps for both θy,θz are tightened, a slight movement of ±4° – 6° is possible, and 360° coarse movement is possible by loosening the clamps. - The rotational center during fine and coarse movement and the center of the mirror are always integrated due to the gimbal mechanism. - The length of the rod can be modified since the standard rod attached has ø 20, L=60 mm. The screw hole for the holder is M6P = 1 and the A40 – A42 rods can be used. - Mirror holder F50: There is the A type that has a micro meter head feeding method and the E type that has the screw method. - Horizontal operation mirror holder F55: Independent horizontal operation (the operational system is mounted in a horizontal direction) so operation is possible without putting a hand into the optical axis and proximity specifications are possible. - F52 - A holder that is secured to elements such as a mirror, plate beam splitter or lens and that can adjust the tilt (θy,θz) of the dual axis. - Tilt of the dual-axis θy,θz. Fine adjustment of ±2° or ±3° (F52) is possible. - The rotational center during fine and coarse movement and the center of the mirror are always integrated due to the gimbal mechanism. - Attachment and removal of the elements such as mirrors is performed using a screw ring method, and a resin ring is attached for protection.

    CAD
    2D3D
    A partire da
    239.74€
    Consegna da
    8 giorni

    *Prezzo unitario in configurazione base

  • Sostegni per orientamento dell'asta

    Sostegni per orientamento dell'asta

    SURUGA SEIKI

    [Features] - Two types are available: one where only the upper mirror is movable, and another where the top and bottom mirrors are movable. - Adjustment pitches can be selected from 0.5mm and 0.25mm. - Two types of mirror fastening methods available: Adhesive and 3-point support. - The pore underside has an M16 = 1 mm male screw. - Can be fixed to a magnet base or plate

    CAD
    2D3D
    A partire da
    330.19€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Reggispecchio cinematico quadrato

    Reggispecchio cinematico quadrato

    CHUO PRECISION INDUSTRIAL

    [Features] - A three-point supporting mirror holder. - The sample is fixed into the lock screw (round and square types only). - The lock screw can be turned with a flathead screwdriver (not attached) - It is for square type (square-shaped) optical elements, and the tilt can be adjusted in two axis directions.

    CAD
    2D
    A partire da
    107.88€
    Consegna da
    32 giorni

    *Prezzo unitario in configurazione base

  • Sostegni per vetro da mezzo pollice

    Sostegni per vetro da mezzo pollice

    SURUGA SEIKI

    Mirror holder especially for the ø 12.7 mm size The actuator screws are available in a set bolt type which allows you to prevent malfunction by means of a knurled knob and inclusion of machinery, both allowing the user to manipulate the screws by hand. [Features] - It implements a 100% new design with small size and high performance as its key concepts. - The main unit is small in size allowing for installation in spaces as tight as 1 square inch. At the same time, it keeps the meandering width and hysteresis width of the 2 axes (θy and θz) in the order of μrad, making its stability at 60 hours (normal temperature) after positioning to be top of its class. - Mounting is done with one M4 screw and creates a margin to prevent rotation. - You can also choose a mounting plate type that will allow you to install it at 0° and 45°. - If a plate was used, the rod shaft and mirror reflection surface will be the same.

    CAD
    2D3D
    A partire da
    130.11€
    Consegna da
    8 giorni

    *Prezzo unitario in configurazione base

  • Sostegni per specchio (Asse ottico: 25 mm)

    Sostegni per specchio (Asse ottico: 25 mm)

    SURUGA SEIKI

    This is the mirror holder of the optical axis, 25 mm in height, for the opt-station. You can choose the mounting method so as not to cause the distortion of the device by the mounting. * The CAD data of this series is under modification. Please wait until the modification is complete.

    CAD
    2D3D
    A partire da
    130.33€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Sostegni per specchio (Morsetto a striscia)

    Sostegni per specchio (Morsetto a striscia)

    SURUGA SEIKI

    It is a mirror holder equipped with a slit clamp (split clamp) system. *The CAD data for this series is currently under modification. Please wait until the modification is complete.

    CAD
    2D3D
    A partire da
    173.47€
    Consegna da
    8 giorni

    *Prezzo unitario in configurazione base

  • Sostegni per specchio Manovrabili da sopra

    Sostegni per specchio Manovrabili da sopra

    SURUGA SEIKI

    Upward operating mirror holder with excellent safety and operability. *CAD data for this series is currently under modification. Please wait until the modification is complete.

    CAD
    2D3D
    A partire da
    249.29€
    Consegna da
    8 giorni

    *Prezzo unitario in configurazione base

  • Supporto con Scanalatura

    Supporto con Scanalatura

    CHUO PRECISION INDUSTRIAL

    [Features] - Holder for fastening with clamp screws, placing the mirror and chart between the groove. - Insert the DURACON at the tip of the clamp screw, and mount the Teflon sheet to the opposite side to make objects insert in between scratch resistant.

    CAD
    2D
    A partire da
    54.51€
    Consegna da
    12 giorni

    *Prezzo unitario in configurazione base

  • Sostegni per specchio

    Sostegni per specchio

    SURUGA SEIKI

    An inexpensive mirror holder that is secured to elements such as a mirror, plate beam splitter or such, and that can adjust the tilt of the two shafts. *The CAD data for this series is currently under modification. Please wait until the modification is complete.

    CAD
    2D3D
    A partire da
    142.36€
    Consegna da
    8 giorni

    *Prezzo unitario in configurazione base

  • Sostegni per vetro di precisione (Gimbaled)

    Sostegni per vetro di precisione (Gimbaled)

    SURUGA SEIKI

    The center of the tilt axis is consistent with the mirror surface. By recombining the plates, it can be modified to a type with freely left to right vertical incidence angle of 45°. *The CAD data for this series is currently under modification. Please wait until the modification is complete.

    CAD
    2D3D
    A partire da
    366.75€
    Consegna da
    8 giorni

    *Prezzo unitario in configurazione base

  • Supporto con specchio semplice

    Supporto con specchio semplice

    CHUO PRECISION INDUSTRIAL

    [Features] - Can be used without regardless of the shape (round or rectangle) because the mirror holder fastens optical elements by adhesion. - Kinematic-type that adjusts the gate using the inclined pivot point (top left) as a reference. - Types that include a shaft (ø 8 mm; length: 60 mm) and base plate (long hole for M6 screws) are available.

    CAD
    2D
    A partire da
    107.44€
    Consegna da
    7 giorni

    *Prezzo unitario in configurazione base

  • Reggispecchio cinematico fine

    Reggispecchio cinematico fine

    CHUO PRECISION INDUSTRIAL

    [Features] - A three-point supporting mirror holder. - The lock screw can be turned with a flathead screwdriver (not attached) - It is for rectangular optical elements, and the tilting can be adjusted in two axis directions (square optical elements can also be used). - It is for rectangular optical elements, and the tilting can be adjusted in two axis directions (square optical elements can also be used).

    CAD
    2D
    A partire da
    107.93€
    Consegna da
    32 giorni

    *Prezzo unitario in configurazione base

  • Sostegni per vetro Modello compatto Manovrabili da sopra

    Sostegni per vetro Modello compatto Manovrabili da sopra

    SURUGA SEIKI

    [Features] - Compact type, top-operation mirror holder with excellent safety and operability. - Fastens small mirrors up to ø 30 and two-axis flap fine adjustments can be performed. - Locks flap wheels with a lock nut. - Two types of mirror fastening methods available: Adhesive and 3-point support. - Rod type and non-rod type are available. - The 3-point support type replaces the two-point support type cand can fasten mirror of ø 20 – ø 30 mm.

    CAD
    2D3D
    A partire da
    166.53€
    Consegna da
    8 giorni

    *Prezzo unitario in configurazione base

  • Supporto con specchio circolare cinematico

    Supporto con specchio circolare cinematico

    CHUO PRECISION INDUSTRIAL

    [Features] - A three-point supporting mirror holder. - The sample is fixed by using a lock screw and pad (round and square types only). - The lock screw can be turned with a flathead screwdriver (not attached). A round type mirror holder is for circular optical elements, and the tilting can be adjusted in two axis directions. - A square type mirror holder is for square type (square-shaped) optical elements, and the tilting can be adjusted in two axis directions. - A grooved type mirror holder is for rectangular optical elements, and the tilting can be adjusted in two axis directions (square optical elements can also be used).

    CAD
    2D
    A partire da
    107.82€
    Consegna da
    32 giorni

    *Prezzo unitario in configurazione base

  • Sostegni per specchio Modello compatto e a movimento preciso

    Sostegni per specchio Modello compatto e a movimento preciso

    SURUGA SEIKI

    This holder holds a small mirror (up to ø 30 mm) in place, and is used for the tilt fine adjustment of the 2 axes. [Features] - Fine motion resolution is twice that of F58N at 0.7°/rotation. - The mirror installation method can be either by adhesive or by 3-point support. - Both the adhesive and the screws come in a rod type and rod-less types. - With the rod-less type, installation is done with M3 or M6 screws. - With the 3-point support time, the mirror can be mounted as long as it is ø 20 – ø 30 mm by pinning it at two points.

    CAD
    2D3D
    A partire da
    108.87€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

  • Sostegno ad alta stabilitá per specchio

    Sostegno ad alta stabilitá per specchio

    SURUGA SEIKI

    This product is ideal for locations necessitating stability and operability, and locations in which high precision or alignment processes are necessary. *CAD data for this series is currently under modification. Please wait until modifications are complete.

    CAD
    2D3D
    A partire da
    173.52€
    Consegna da
    8 giorni

    *Prezzo unitario in configurazione base

  • Supporto con specchio per funzionamento superiore di tipo Gimbaled

    Supporto con specchio per funzionamento superiore di tipo Gimbaled

    CHUO PRECISION INDUSTRIAL

    [Features] - Mirror holder that incorporates a round mirror and a Gimbal type that matches the center of the mirror to the rotating center of the holder. - The gate is adjusted from top of holder so there is no concern for horizontally cutting the optical system for the adjustment. - The shaft mounting direction can be changed in 90°.

    CAD
    2D
    A partire da
    249.16€
    Consegna da
    22 giorni

    *Prezzo unitario in configurazione base

  • Sostegni per specchio ad alte prestazioni (Asse ottico: 25 mm)

    Sostegni per specchio ad alte prestazioni (Asse ottico: 25 mm)

    SURUGA SEIKI

    [Features] - Small specification of FM532. - Optical axis height of 25mm optical axis height is designed for the optical station. - This product is ideal for locations that require stability and operability, and locations in which high precision or alignment processes are necessary.

    CAD
    2D3D
    A partire da
    141.12€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Movimento fine e sostegni per specchio compatti (con blocco)

    Movimento fine e sostegni per specchio compatti (con blocco)

    SURUGA SEIKI

    [Features] - A flap lock nut is attached to FM58 - There is an "adhesive type" or by "3-point support type" for the mirror installation method. - Rod type and rod-less type are available for both adhesive and screw. - For the rod-less type, installation is done with M3 or M6 screws. - For the 3-point support type, the mirror can be fixed up to ø 20 – ø 30 mm by pinning it at two points.

    CAD
    2D3D
    A partire da
    119.60€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

Configura

Ripristina

Limitare la ricerca specificando il produttore

Marchio

Prodotti commerciali MISUMI

Limitare la ricerca specificando Tipo dati CAD

  • 2D
  • 3D

Selezione immagine

Chiudi