• 10 milioni di componenti
  • Spedizione in giornata per 30.000 articoli
  • Prezzi competitivi

I nostri uffici sono aperti lun.- giov. 8:00 - 17:00, ven. 8:00-16:00 (GMT+2)

Ricerca per categoria
o fornitore

Ricerca per categoria
Componenti meccanici
Viti, bulloni, rondelle, dadi
Materiali industriali
Materiale elettrico
Controlli e parti per PC
Utensili da taglio
Materiali industriali
Materiali per imballaggio
Materiale sanitario, per uffici, per antinfortunistica
Materiali per R&D e camera bianca
Componenti per stampi deformazione lamiera
Componenti per stampi iniezione plastica

Ricerca per fornitore
Lista fornitori

Supporti filtro

  • Numero di dati da visualizzare
    30
    45
    60
  • Ordina
Giorni spedizione
  • Tutti gli articoli
  • 8 giorni o meno
  • 17 giorni o meno
  • Portafiltri con molla a foglia

    Portafiltri con molla a foglia

    SURUGA SEIKI

    [Features] - Holder for fastening square and round filters. - Can set up to four outer shape ø 50 mm and 50 mm filters. - Push the filter in from the top and the filter will be pushed in to the reference face by a leaf spring to be fastened. - For this reason, the filter angle to the optical axis is constantly maintained even if the filter is repeatedly removed. The optical axis will not be greatly moved out of position. - In addition, filters will not touch each other. - The contact portion of leaf spring that touches the filter is made of resin.

    CAD
    2D3D
    A partire da
    152.17€
    Consegna da
    8 giorni

    *Prezzo unitario in configurazione base

  • Portafiltri ND con Trasparenza variabile

    Portafiltri ND con Trasparenza variabile

    SURUGA SEIKI

    [Features] - A holder with 6 ND filters (ø 15 mm) possessing different ratios of transparency that are mounted and rotate, allowing for the selection of various levels of transparency - A filter that can be fixed into place with setscrews in two different places. - No set ND filter. - Rot types (F71N-1) and plate types (F71N-2) available. - The height of the light axis is 25 mm so that the plate type can be compatible with OPS.

    CAD
    2D3D
    A partire da
    270.30€
    Consegna da
    8 giorni

    *Prezzo unitario in configurazione base

  • Filtro del telaio per uso con portafiltri rotondi

    Filtro del telaio per uso con portafiltri rotondi

    CHUO PRECISION INDUSTRIAL

    [Features] - C-46 is a specimen stage (table) for placing a specimen in holography or optical experiments. - For C-47, small diameter holes are opened at 30° intervals in the disks that rotate. - C-52- (4) is a 4 inch and 5 inch size specimen and hologram plate holder. - FHC is a holder for the filter inserted in the metal frame and FHF is the metal frame which the filter is inserted. - Up to a maximum of five FHC can be lined up and used

    CAD
    2D
    A partire da
    17.17€
    Consegna da
    17 giorni

    *Prezzo unitario in configurazione base

  • Sostegno per filtro rotondo

    Sostegno per filtro rotondo

    CHUO PRECISION INDUSTRIAL

    [Features] - Holder for filter with metal frame. - Maximum of five can be lined up for use.

    CAD
    2D
    A partire da
    91.73€
    Consegna da
    17 giorni

    *Prezzo unitario in configurazione base

  • Portafiltri (Forma a Y)

    Portafiltri (Forma a Y)

    SURUGA SEIKI

    [Features] - Holder for setting round and square filters. - Up to four outer shape ø 50 mm, 50 mm filters can be set. - The filter is pushed in from the top, but there may by an inclination due to thickness as the filter is placed and not secured.

    CAD
    2D3D
    A partire da
    109.36€
    Consegna da
    8 giorni

    *Prezzo unitario in configurazione base

  • Supporti per filtri (Forma a blocco)

    Supporti per filtri (Forma a blocco)

    SURUGA SEIKI

    [Features] - A holder to set ø 15 mm or ø 20 mm filters. - The height of the optical axis is standardized at 25 mm from the bottom face. - Two filters can be set. - By loosening the clamp, the holder section can be slid back and forth and fixed according to the thickness of the filter. - Filter thicknesses of up to 4 mm can be accommodated. - There is an M4 tap hole in the bottom face plate and can be changed to the rod type by attaching the rod. - The F561-20 can also be used as a simple change element holder by directly turning the element

    CAD
    2D3D
    A partire da
    151.63€
    Consegna da
    8 giorni

    *Prezzo unitario in configurazione base

Configura

Ripristina

Limitare la ricerca specificando il produttore

Marchio

Prodotti commerciali MISUMI

Limitare la ricerca specificando Tipo dati CAD

  • 2D
  • 3D

Selezione immagine

Chiudi