• 10 milioni di componenti
  • Spedizione in giornata per 30.000 articoli
  • Prezzi competitivi

I nostri uffici sono aperti lun.- giov. 8:00 - 17:00, ven. 8:00-16:00 (GMT+2)

Ricerca per categoria
o fornitore

Ricerca per categoria
Componenti meccanici
Viti, bulloni, rondelle, dadi
Materiali industriali
Materiale elettrico
Controlli e parti per PC
Utensili da taglio
Materiali industriali
Materiali per imballaggio
Materiale sanitario, per uffici, per antinfortunistica
Materiali per R&D e camera bianca
Componenti per stampi deformazione lamiera
Componenti per stampi iniezione plastica

Ricerca per fornitore
Lista fornitori

Snodo, supporti snodo

  • Numero di dati da visualizzare
    30
    45
    60
  • Ordina
Giorni spedizione
  • Tutti gli articoli
  • 3 giorni o meno
  • 5 giorni o meno
  • 7 giorni o meno
  • 8 giorni o meno
  • 10 giorni o meno
  • 17 giorni o meno
  • 22 giorni o meno
  • 32 giorni o meno
  • Barre

    Barre

    SURUGA SEIKI

    It is optical component mounting rod made of stainless steel. You can use the holder for opt-station with M4 screws as a rod type holder. [Features] - [A40M / A41M] It is stainless steel optical component mounting rod. - You can use the holder for opt-station with M4 screws as a rod type holder. - [A40 / A41 / A42] It is stainless steel optical component mounting rod. - It is equipped with M6P = 1 of screws that are common from A40 to A42, so it can be mounted to a variety of holders and the like. - Since there are ø 3 mm or 4 mm through holes on the bottom of the M6 screw, when mounting the holder it can be securely fixed by passing a wrench or such through the hole.

    Consegna da
    7 giorni
  • Barra montante

    Barra montante

    SURUGA SEIKI

    Stand used to adjust the height of holders and such. The rod can firmly secure two points of line contact with a point of clamp screw contact. *The CAD data for this series is currently under modification. Please wait until the modification is complete.

    CAD
    2D
    A partire da
    26.10€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Barre universali

    Barre universali

    SURUGA SEIKI

    Length / Diameter / Tap can be set from the graph. In the case of special tap or special outside diameter please contact us. * CAD data of this series is currently being revised. Please wait until the revisions are complete.

    Consegna da
    10 giorni
  • Albero per macchina fotografica, 1/4 di pollice

    Albero per macchina fotografica, 1/4 di pollice

    CHUO PRECISION INDUSTRIAL

    [Features] - A ø 20 mm stainless steel shaft on which a tripod screw (nominally 1/4) has been processed

    CAD
    2D
    A partire da
    23.84€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Aste, φ12

    Aste, φ12

    CHUO PRECISION INDUSTRIAL

    [Features] - Non-magnetic stainless steel balls with extendable male screws and tap holes. (PL-12-300M cannot be extended)

    CAD
    2D
    A partire da
    14.45€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Aste Shirttail

    Aste Shirttail

    SURUGA SEIKI

    Using this rod, it is possible to set the holder and such at various optical axis heights without having to buy a new rod. *The CAD data for this series is currently under modification. Please wait until the modification is complete.

    Consegna da
    7 giorni
  • Paul Set di altezze variabili

    Paul Set di altezze variabili

    SURUGA SEIKI

    This is used if the height of the height-adjustment platform is changed, etc. You can define any length in 1 mm increments within 300 mm. * The CAD data for this series is being revised. Please wait a little longer until the revisions are completed.

    Consegna da
    10 giorni
  • Aste

    Aste

    SURUGA SEIKI

    It is a pole made stainless steel. Standing with various kinds of stages and bases using M16 p=1 screws, it can be used connected with cross-clamps, etc. * The CAD data for this series is currently under modification. Please wait until the modification is complete.

    Consegna da
    7 giorni
  • Aste, φ8

    Aste, φ8

    CHUO PRECISION INDUSTRIAL

    [Features] - Non-magnetic stainless steel balls with extendable male screws and tap holes.

    CAD
    2D
    A partire da
    14.18€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Manopole a ripresa

    Manopole a ripresa

    SURUGA SEIKI

    Clamp knob for the rod stand. The tip is a spring pin. The rod will not fall off when lightly tightened, it can be adjusted vertically with one hand.

    CAD
    2D
    A partire da
    8.88€
    Consegna da
    8 giorni

    *Prezzo unitario in configurazione base

  • Supporto per asta di movimento preciso Movimento In alto / in basso

    Supporto per asta di movimento preciso Movimento In alto / in basso

    SURUGA SEIKI

    [Features] - A rod stand that can do fine vertical movements. - Once the rod has been fixed to the rod fixing knob, the knurled adjustable knob can be rotated, and allows fine vertical movement of the rod. - Fixed to the vertical fixing clamp once adjustments are complete. - The range of fine movement is 10 mm.

    CAD
    2D
    A partire da
    109.25€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Pali, φ21

    Pali, φ21

    CHUO PRECISION INDUSTRIAL

    [Features] - Non-magnetic stainless steel balls with extendable male screws and tap holes.

    CAD
    2D
    A partire da
    19.50€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Montante, φ12

    Montante, φ12

    CHUO PRECISION INDUSTRIAL

    [Features] - Fastens all types of holder shafts, such as mirror holders. - Products for ø 8 mm, ø 12 mm, and ø 20 mm and by fastening heights (depths) are available. - Clamp screw is used to fasten the shaft and can be fastened from any of three places. - Collar (thickness 10 mm) that can change the direction with the height fixated is standardized. - Increases holding strength by disposing clamp screws at two locations (up and down) on products with a total length of 80 mm or longer.

    CAD
    2D
    A partire da
    31.06€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Sostegni per asta di tipo Collet

    Sostegni per asta di tipo Collet

    SURUGA SEIKI

    It is fixed by the collet-type clamping method, so it has good stability and can be more effectively fixed. * The CAD data for this series is currently under modification. Please wait until the modification is complete.

    CAD
    2D
    A partire da
    90.85€
    Consegna da
    8 giorni

    *Prezzo unitario in configurazione base

  • Anello intermedio

    Anello intermedio

    SURUGA SEIKI

    This part is used as a rod stand. * The CAD data for this series is currently being modified. Please wait a short time until the modification has been completed.

    CAD
    2D
    A partire da
    17.41€
    Consegna da
    8 giorni

    *Prezzo unitario in configurazione base

  • Barra, φ12

    Barra, φ12

    CHUO PRECISION INDUSTRIAL

    [Features] - Non-magnetic stainless steel balls with extendable male screws and tap holes. (PL-12-300M cannot be extended) Stainless steel components, apart from needle. - All lengths of products are available for the following four diameters: ø 8 mm, ø 12 mm, ø 20 m, and ø 30 mm - Bars without male screws and taps is also non-magnetic stainless steel; all lengths of products are available for ø 12 mm and ø 20 mm.

    CAD
    2D
    A partire da
    12.93€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Supporti regolabili

    Supporti regolabili

    CHUO PRECISION INDUSTRIAL

    Stand capable of fine vertical adjustment.

    CAD
    2D
    A partire da
    107.77€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Colore

    Colore

    CHUO PRECISION INDUSTRIAL

    [Features] - Used to prevent shifting in the perpendicular direction of a shaft that is fixed to the stand. - Since when this collar is fixed to the shaft, even if the stand's clamp screw wp is loosened, there is no shifting in the shaft (perpendicular) direction, it is easy to adjust in the optical axis within the transverse plane

    CAD
    2D
    A partire da
    11.90€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Montante, φ20

    Montante, φ20

    CHUO PRECISION INDUSTRIAL

    [Features] - Fastens all types of holder shafts, such as mirror holders. - Products for ø 8 mm, ø 12 mm, and ø 20 mm and by fastening heights (depths) are available. - Clamp screw is used to fasten the shaft and can be fastened from any of three places. - Collar (thickness 10 mm) that can change the direction with the height fixated is standardized. - Increases holding strength by disposing clamp screws at two locations (up and down) on products with a total length of 80 mm or longer.

    CAD
    2D
    A partire da
    33.29€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Montante, φ8

    Montante, φ8

    CHUO PRECISION INDUSTRIAL

    [Features] - Fastens all types of holder shafts, such as mirror holders. - Products for ø 8 mm, ø 12 mm, and ø 20 mm and by fastening heights (depths) are available. - Clamp screw is used to fasten the shaft and can be fastened from any of three places. - Collar (thickness 10 mm) that can change the direction with the height fixated is standardized. - Increases holding strength by disposing clamp screws at two locations (up and down) on products with a total length of 80 mm or longer.

    CAD
    2D
    A partire da
    25.66€
    Consegna da
    7 giorni

    *Prezzo unitario in configurazione base

  • Barra, φ20

    Barra, φ20

    CHUO PRECISION INDUSTRIAL

    [Features] - A pole made of non-magentic stainless steel

    CAD
    2D
    A partire da
    35.24€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Aste, φ30

    Aste, φ30

    CHUO PRECISION INDUSTRIAL

    CAD
    2D
    A partire da
    38.99€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

Configura

Ripristina

Limitare la ricerca specificando il produttore

Marchio

Prodotti commerciali MISUMI

Limitare la ricerca specificando Tipo dati CAD

  • 2D
  • 3D

Selezione immagine

Chiudi