• 10 milioni di componenti
  • Spedizione in giornata per 30.000 articoli
  • Prezzi competitivi

I nostri uffici sono aperti lun.- giov. 8:00 - 17:00, ven. 8:00-16:00 (GMT+2)

Ricerca per categoria
o fornitore

Ricerca per categoria
Componenti meccanici
Viti, bulloni, rondelle, dadi
Materiali industriali
Materiale elettrico
Controlli e parti per PC
Utensili da taglio
Materiali industriali
Materiali per imballaggio
Materiale sanitario, per uffici, per antinfortunistica
Materiali per R&D e camera bianca
Componenti per stampi deformazione lamiera
Componenti per stampi iniezione plastica

Ricerca per fornitore
Lista fornitori

Schede per riduzione vibrazioni da scrivania

  • Numero di dati da visualizzare
    30
    45
    60
  • Ordina
Giorni spedizione
  • Tutti gli articoli
  • 13 giorni o meno
  • 23 giorni o meno
  • 33 giorni o meno
  • Tavola per la rimozione delle vibrazioni nel piano per Piastre con superfici alveolari

    Tavola per la rimozione delle vibrazioni nel piano per Piastre con superfici alveolari

    CHUO PRECISION INDUSTRIAL

    [Features] - A desktop vibration removal board that adopts a high-rigidity honeycomb surface plate. - The surface plate face sheet is buffed with 25mm pitch processing and M6 tapping by default. - A magnet stand, etc. can be used since the face sheet (upper surface) is a magnetized SUS430 (stainless steel). - There are three types: vibration-insulating rubber, air spring, and air spring with automatic level adjuster. - The R type is equipped with a special vibration-insulating rubber, and high-grade vibration insulation performance is obtained with the vibration insulating rubber. In addition, it can be easily used since an air supply is not required. An orifice is incorporated within the vibration-insulating rubber, and there is a smooth vibration attenuating function with the same diaphragm effect as an air spring. - The H type can easily restrain compressed air with a hand pump even without an air supply, and the surface plate is floated with an air spring. A hand pump is included. - Since a compact automatic level adjuster is incorporated into an A type, if there is an air supply, the horizontal control of the level is maintained by automatically adjusting the air spring pressure in response to the sprung load. Errors are supplied and evacuated in approximately two seconds by turning the pin lever valve ON and OFF, and the shaking can be resolved when adjusting mounted devices. There is no air piping, and if an air supply cannot be provided, a silent type compressor can be used.

    A partire da
    1,310.38€
    Consegna da
    23 giorni

    *Prezzo unitario in configurazione base

  • Tavola per la rimozione delle vibrazioni nel piano

    Tavola per la rimozione delle vibrazioni nel piano

    CHUO PRECISION INDUSTRIAL

    [Features] - A convenient shock-absorbing board that can be used as it is on top of an office desk or work bench. - Easy to carry around as it is light weight, compactness and slim type. - The 5R type is equipped with a special anti-vibration rubber, with which a high vibration insulation performance can be obtained. - In addition, it can be easily used since it does not require an air supply. - An orifice is incorporated within the vibration-insulating rubber, and there is a smooth vibration attenuating function with the same diaphragm effect as an air spring. - The VSM type is a maintenance free shock-absorbing desk that adopts a composite mount (PAT.P) combining a coil spring with a viscoelastic body, and is equipped with superior vibration insulation performance and high attenuation characteristics. The resonance magnification is approximately 2.5 times, and it possesses a noteworthy performance. - Since a compact automatic level adjuster is incorporated into the 5AA type, if there is an air supply, the horizontal control of the level is maintained by automatically adjusting the air spring pressure in response to the sprung load. Errors are supplied and evacuated in approximately two seconds by turning the pin lever valve ON and OFF, and the shaking can be resolved when adjusting mounted devices. A ø 6mm x 3m urethane tube and joint (RT1/8 external screw) are attached for the connection with an air supply.

    A partire da
    704.05€
    Consegna da
    13 giorni

    *Prezzo unitario in configurazione base

Configura

Ripristina

Limitare la ricerca specificando il produttore

Marchio

Prodotti commerciali MISUMI

Limitare la ricerca specificando Tipo dati CAD

  • 2D
  • 3D

Selezione immagine

Chiudi