• 10 milioni di componenti
  • Spedizione in giornata per 30.000 articoli
  • Prezzi competitivi

I nostri uffici sono aperti lun.- giov. 8:00 - 17:00, ven. 8:00-16:00 (GMT+1)

Ricerca per categoria
o fornitore

Ricerca per categoria
Componenti meccanici
Viti, bulloni, rondelle, dadi
Materiali industriali
Materiale elettrico
Controlli e parti per PC
Utensili da taglio
Materiali industriali
Materiali per imballaggio
Materiale sanitario, per uffici, per antinfortunistica
Materiali per R&D e camera bianca
Componenti per stampi deformazione lamiera
Componenti per stampi iniezione plastica

Ricerca per fornitore
Lista fornitori

Cinghie

  • Numero di dati da visualizzare
    30
    45
    60
Giorni spedizione
  • Tutti gli articoli
  • Stesso giorno
  • 1 giorno o meno
  • 3 giorni o meno
  • 4 giorni o meno
  • 5 giorni o meno
  • 6 giorni o meno
  • 7 giorni o meno
  • 8 giorni o meno
  • 9 giorni o meno
  • 11 giorni o meno
  • Super Torque S3M (Cinghia)

    Super Torque S3M (Cinghia)

    MITSUBOSHI BELTING

    It is an optimal belt in applications where smooth rotation is required with a high degree of accuracy. The Bare Back specification with little rubber powder scattering has become the standard. [Features] - Unique mold (will require special mold*.) Using it enables attachment of projections to the back surface of the belt that are optimally shaped for the conveyed article. - By doing one-piece molding, it makes it difficult for projections to be peeled off. - Since colorable urethane is used, it can be colored as you wish. - Since formation is done in a mold, support of large-volume orders is also possible.

    A partire da
    4.03€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • cinghie dentate XL

    cinghie dentate XL

    MITSUBOSHI BELTING

    A compact design is possible because it is lightweight and thin, as well as being flexible. The bare back specification with less rubber powder scattering is standard. [Features] - Special mold (*requires separate mold.) By using, the optimally shaped protrusion can be attached to the back of the belt for the conveyor belt . One-piece molding makes it difficult for projections to be peeled off. - Since colorable urethane is used, it can be colored as you wish. - Large-volume orders also possible since molds are used.

    A partire da
    3.53€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • cinghie dentate L

    cinghie dentate L

    MITSUBOSHI BELTING

    It is ideal for light load transmission requiring accuracy. Made of polyurethane, it has less rubber powder, creating a clean environment. [Features] - When used with special molds (*requires separate mold.) the protrusions of the best-fitting configurations can be mounted on the back of the belt. - Protrusions will not peel off easily owing to its one-piece mold design. - Since colorable urethane is used, you can request for your preferred color. - Since molds are used, large-volume orders can be supported.

    A partire da
    8.26€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Piastra di serraggio per cinghia dentata/Anti-sovrapressione/Posizione fori configurabile
    A partire da
    17.30€
    Consegna da
    7 giorni

    *Prezzo unitario in configurazione base

  • Cinghia dentata Super Torque S5M

    Cinghia dentata Super Torque S5M

    MITSUBOSHI BELTING

    It is an optimal belt in applications where smooth rotation is required with a high degree of accuracy. The Bare Back specification with little rubber powder scattering has become the standard. [Features] - Unique mold (will require special mold*.) Using it enables attachment of projections to the back surface of the belt that are optimally shaped for the conveyed article. - By doing one-piece molding, it makes it difficult for projections to be peeled off. - Since colorable urethane is used, it can be colored as you wish. - Since formation is done in a mold, support of large-volume orders is also possible.

    A partire da
    7.19€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Cinghia dentata Super Torque S8M

    Cinghia dentata Super Torque S8M

    MITSUBOSHI BELTING

    Can also be utilized widely in fields where chains and gears are used, with high transmission capacity rounded tooth belt. [Features] - Unique mold (*requires separate mold.) Protrusions with configuration optimized for items on conveyor belt can be attached to back surface of belt by use of unique mold (*requires separate mold.) - One-piece molding, so difficult for protrusions to peel off. - Colorable urethane used, so can be colored as you wish. - Molded, so large-volume orders also possible.

    A partire da
    13.56€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • cinghie dentate H

    cinghie dentate H

    MITSUBOSHI BELTING

    Synchronous transmission belt that overcomes the shortcomings of chains and gears. [Features] - Special mold (* additional mold required.) By using a special mold, you can attach the projection of optimum shape in the conveyed object to the back surface of the belt. - By doing one-piece molding, it makes it difficult for projections to be peeled off. - Since colorable urethane is used, it can be colored as you wish. - It is molded, so large-volume orders are also possible.

    A partire da
    17.17€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Cinghia dentata T10

    Cinghia dentata T10

    MITSUBOSHI BELTING

    It is ideal for light load transmissions requiring accuracy. Made of polyurethane, it has less rubber powder, creating a clean environment. [Features] - When used with special molds (*requires separate mold.) the protrusions of the best-fitting configurations can be mounted on the back of the belt. - Protrusions will not peel off easily owing to its one-piece mold design. - Since colorable urethane is used, you can request for your preferred color. - Since molds are used, large-volume orders can be supported.

    A partire da
    11.43€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Piastre di serraggio per cinghie dentate/Attacco a dado/Singola
    A partire da
    6.80€
    Consegna da
    Stesso giorno

    La spedizione in giornata é valida solo per ordini effettuati entro le 16:00CET dal lun al giov e il ven entro le 15:00CET.

    Articoli stock inclusi

    *Prezzo unitario in configurazione base

  • cinghie dentate T5

    cinghie dentate T5

    MITSUBOSHI BELTING

    It is ideal for light load transmissions requiring accuracy. Made of polyurethane, it has less rubber powder, creating a clean environment. [Features] - Protrusions of various shapes can be added to the back of the belt. - When used with special molds, the protrusions of the best-fitting configurations can be mounted on the back of the belt. - Strength in protrusion peeling. - Protrusions will not peel off easily owing to its one-piece mold design. - Preferred colors can be specified. - Since colorable urethane is used, you can request for your preferred color. - Large volume orders can be supported. - Since molds are used, large-volume orders can be supported.

    A partire da
    4.09€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Cinghia dentata Super Torque S2M

    Cinghia dentata Super Torque S2M

    MITSUBOSHI BELTING

    It is an optimal belt in applications where smooth rotation is required with a high degree of accuracy. The Bare Back specification with little rubber powder scattering has become the standard.

    A partire da
    3.11€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Cinghia dentata MXL /T80

    Cinghia dentata MXL /T80

    MITSUBOSHI BELTING

    It is ideal for light load transmissions requiring accuracy. Made of polyurethane, it has less rubber powder, creating a clean environment. [Features] - When used with special molds (*requires separate mold.) the protrusions of the best-fitting configurations can be mounted on the back of the belt. - Protrusions will not peel off easily owing to its one-piece mold design. - Since colorable urethane is used, you can request for your preferred color. - Since molds are used, large-volume orders can be supported.

    A partire da
    2.71€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Piastra di serraggio per cinghia dentata/Anti-sovrapressione/Posizione fori fissa
    A partire da
    10.90€
    Consegna da
    Stesso giorno

    La spedizione in giornata é valida solo per ordini effettuati entro le 16:00CET dal lun al giov e il ven entro le 15:00CET.

    Articoli stock inclusi

    *Prezzo unitario in configurazione base

  • Piastra di serraggio per cinghia dentata/Attacco a dado/Doppia
    A partire da
    8.30€
    Consegna da
    Stesso giorno

    La spedizione in giornata é valida solo per ordini effettuati entro le 16:00CET dal lun al giov e il ven entro le 15:00CET.

    Articoli stock inclusi

    *Prezzo unitario in configurazione base

  • Cinghia dentata/Con guida di supporto
    Consegna da
    7 giorni
  • Piastre di serraggio per cinghie dentate/Multiattacco
    A partire da
    3.20€
    Consegna da
    Stesso giorno

    La spedizione in giornata é valida solo per ordini effettuati entro le 16:00CET dal lun al giov e il ven entro le 15:00CET.

    Articoli stock inclusi

    *Prezzo unitario in configurazione base

  • Cinghia dentata Super Torque S3M

    Cinghia dentata Super Torque S3M

    KATAYAMA CHAIN

    Improved gearing due to the rational gear design of the belt and the pulley. A smooth high transmission is obtained with the use of a small pulley diameter.

    A partire da
    5.06€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Cinghia dentata Super Torque S5M

    Cinghia dentata Super Torque S5M

    KATAYAMA CHAIN

    Improved gearing due to the rational gear design of the belt and the pulley. A smooth high transmission is obtained with the use of a small pulley diameter.

    A partire da
    8.52€
    Consegna da
    9 giorni

    *Prezzo unitario in configurazione base

  • Cinghia dentata Super Torque S14M

    Cinghia dentata Super Torque S14M

    MITSUBOSHI BELTING

    Can also be utilized widely in fields where chains and gears are used, with high transmission capacity rounded tooth belt.

    A partire da
    86.04€
    Consegna da
    7 giorni

    *Prezzo unitario in configurazione base

  • Cinghia dentata Super Torque S2M

    Cinghia dentata Super Torque S2M

    KATAYAMA CHAIN

    Improved gearing due to the rational gear design of the belt and the pulley. A smooth high transmission is obtained with the use of a small pulley diameter.

    A partire da
    3.73€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Cinghia di distribuzione MXL

    Cinghia di distribuzione MXL

    KATAYAMA CHAIN

    [Features] - Lightweight and high-speed rotation are possible compared to chain transmission. - No lubrication required. Clean power transmission with little noise

    A partire da
    3.48€
    Consegna da
    9 giorni

    *Prezzo unitario in configurazione base

  • Cintura sincronizzata T5

    Cintura sincronizzata T5

    KATAYAMA CHAIN

    Lighter, and with faster rotation possible, compared to chain transmission. No oiling is required; clean power transmission with little noise

    A partire da
    8.78€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • 2GT Passo del dente: 2 mm, Larghezza cinghia: 4 mm (Cinghia a bassa produzione di particolato) 2GT

    2GT Passo del dente: 2 mm, Larghezza cinghia: 4 mm (Cinghia a bassa produzione di particolato) 2GT

    NABEYA BI-TECH

    [Features] - Tooth pitch: 2 mm. - BLP: A backlashless pulley is adopted. - The backlash per tooth is zero. - Low dust-generating belt with special coating. - It does not disperse rubber powder. - Ideal for compact, precision equipment. - You can use it with 50 W – 200 W motors. - Specialized products are also produced such as the timing pulley number of teeth and shape, and the timing belt length.

    A partire da
    5.19€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Cinghia dentata T10

    Cinghia dentata T10

    KATAYAMA CHAIN

    Lighter, and with faster rotation possible, compared to chain transmission. No oiling is required; clean power transmission with little noise

    A partire da
    4.88€
    Consegna da
    9 giorni

    *Prezzo unitario in configurazione base

  • 1.5 GT Passo del dente: 1.5 mm, Larghezza cinghia: 3 mm (Cinghia a bassa produzione di particolato) 1.5 GT

    1.5 GT Passo del dente: 1.5 mm, Larghezza cinghia: 3 mm (Cinghia a bassa produzione di particolato) 1.5 GT

    NABEYA BI-TECH

    [Features] - Tooth pitch: 1.5mm. - BLP: A backlashless pulley is adopted. - The backlash per tooth is zero. - Low dust-generating belt with special coating. - It does not disperse rubber powder. - Ideal for compact, precision equipment. - You can use it with a 10 W – 50 W motor. - Specialized products are also produced such as the timing pulley number of teeth and shape, and the timing belt length.

    A partire da
    4.99€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Cinghia dentata Super Torque S8M

    Cinghia dentata Super Torque S8M

    KATAYAMA CHAIN

    Improved gearing due to the rational gear design of the belt and the pulley. A smooth high transmission is obtained with the use of a small pulley diameter.

    A partire da
    18.14€
    Consegna da
    9 giorni

    *Prezzo unitario in configurazione base

  • Cinghia dentata Mega Torque MTB

    Cinghia dentata Mega Torque MTB

    KATAYAMA CHAIN

    Improved gearing due to the rational gear design of the belt and the pulley. A smooth high transmission is obtained with the use of a small pulley diameter.

    A partire da
    29.55€
    Consegna da
    9 giorni

    *Prezzo unitario in configurazione base

  • cinghie dentate XH

    cinghie dentate XH

    MITSUBOSHI BELTING

    Synchronous transmission belt that overcomes the shortcomings of chains and gears.

    A partire da
    108.28€
    Consegna da
    7 giorni

    *Prezzo unitario in configurazione base

  • Cinghia dentata H

    Cinghia dentata H

    KATAYAMA CHAIN

    Lighter, and with faster rotation possible, compared to chain transmission. No oiling is required; clean power transmission with little noise

    A partire da
    24.07€
    Consegna da
    9 giorni

    *Prezzo unitario in configurazione base

  • Cinghia dentata T10

    Cinghia dentata T10

    KATAYAMA CHAIN

    Lighter, and with faster rotation possible, compared to chain transmission. No oiling is required; clean power transmission with little noise

    A partire da
    20.11€
    Consegna da
    9 giorni

    *Prezzo unitario in configurazione base

  • Cinghia di distribuzione XXH

    Cinghia di distribuzione XXH

    MITSUBOSHI BELTING

    Synchronous transmission belt that overcomes the shortcomings of chains and gears.

    A partire da
    180.92€
    Consegna da
    32 giorni

    *Prezzo unitario in configurazione base

  • 2GT Passo del dente: 2 mm, Larghezza cinghia: 6 mm (Cinghia a bassa produzione di particolato) 2GT

    2GT Passo del dente: 2 mm, Larghezza cinghia: 6 mm (Cinghia a bassa produzione di particolato) 2GT

    NABEYA BI-TECH

    [Features] - Tooth pitch: 2 mm. - BLP: A backlashless pulley is adopted. - The backlash per tooth is zero. - Low dust-generating belt with special coating. - It does not disperse rubber powder. - Ideal for compact, precision equipment. - You can use it with 50 W – 200 W motors. - Specialized products are also produced such as the timing pulley number of teeth and shape, and the timing belt length.

    A partire da
    6.94€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Cinghia dentata L

    Cinghia dentata L

    KATAYAMA CHAIN

    Lighter, and with faster rotation possible, compared to chain transmission. No oiling is required; clean power transmission with little noise

    A partire da
    11.60€
    Consegna da
    9 giorni

    *Prezzo unitario in configurazione base

  • Cinghia dentata Super Torque S14M

    Cinghia dentata Super Torque S14M

    KATAYAMA CHAIN

    Improved gearing due to the rational gear design of the belt and the pulley. A smooth high transmission is obtained with the use of a small pulley diameter.

    A partire da
    102.42€
    Consegna da
    9 giorni

    *Prezzo unitario in configurazione base

  • 3 GT Passo del dente: 3 mm, Larghezza cinghia: 6 mm 3GT

    3 GT Passo del dente: 3 mm, Larghezza cinghia: 6 mm 3GT

    NABEYA BI-TECH

    [Features] - Tooth pitch: 3 mm. - BLP: A backlashless pulley is adopted. - The backlash per tooth is zero. - Ideal for compact, precision equipment. - You can use it with 100 W – 1,000 W motors. - Specialized products are also produced such as the timing pulley number of teeth and shape, and the timing belt length.

    A partire da
    6.82€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • 3 GT Passo del dente: 3 mm, Larghezza cinghia: 9 mm 3 GT

    3 GT Passo del dente: 3 mm, Larghezza cinghia: 9 mm 3 GT

    NABEYA BI-TECH

    [Features] - Tooth pitch: 3 mm. - BLP: A backlashless pulley is adopted. - The backlash per tooth is zero. - Ideal for compact, precision equipment. - You can use it with 100 W – 1,000 W motors. - Specialized products are also produced such as the timing pulley number of teeth and shape, and the timing belt length.

    A partire da
    9.43€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Cinghie dentate per coppia elevata - 2GT/3GT
    A partire da
    2.50€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Cinghie dentate per coppia elevatissima - EV5GT/EV8YU
    A partire da
    8.40€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Cinghie dentate per coppia elevatissima - MTS8M

    Cinghie dentate per coppia elevatissima - MTS8M

    MISUMI

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    11.60€
    Consegna da
    7 giorni

    *Prezzo unitario in configurazione base

  • Cinghie dentate - T5/T10
    A partire da
    5.60€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Cinghie dentate - MXL, XL, L, H

    Cinghie dentate - MXL, XL, L, H

    MISUMI

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    2.40€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Cinghie dentate per coppia elevata - S2M, S3M, S5M, S8M, S14M
    A partire da
    2.60€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Cinghie dentate per coppia elevata - P

    Cinghie dentate per coppia elevata - P

    MISUMI

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    4.00€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

Configura

Ripristina

Stock

Limitare la ricerca specificando Spec./Dim.

Limitare la ricerca specificando il produttore

Marchio

Prodotti MISUMI
  • Prodotti convenienti
Prodotti commerciali MISUMI

Limitare la ricerca specificando Tipo dati CAD

  • 2D
  • 3D

Selezione immagine

Chiudi