• 10 milioni di componenti
  • Spedizione in giornata per 30.000 articoli
  • Prezzi competitivi

I nostri uffici sono aperti lun.- giov. 8:00 - 17:00, ven. 8:00-16:00 (GMT+2)

Ricerca per categoria
o fornitore

Ricerca per categoria
Componenti meccanici
Viti, bulloni, rondelle, dadi
Materiali industriali
Materiale elettrico
Controlli e parti per PC
Utensili da taglio
Materiali industriali
Materiali per imballaggio
Materiale sanitario, per uffici, per antinfortunistica
Materiali per R&D e camera bianca
Componenti per stampi deformazione lamiera
Componenti per stampi iniezione plastica

Ricerca per fornitore
Lista fornitori

Puleggie per cinghie a V

  • Numero di dati da visualizzare
    30
    45
    60
  • Ordina
Giorni spedizione
  • Tutti gli articoli
  • 3 giorni o meno
  • 4 giorni o meno
  • 5 giorni o meno
  • 6 giorni o meno
  • 7 giorni o meno
  • 8 giorni o meno
  • 9 giorni o meno
  • 11 giorni o meno
  • 12 giorni o meno
  • 14 giorni o meno
  • Puleggia standard V

    Puleggia standard V

    NABEYA BI-TECH

    The maximum permissible unbalanced circumferential mass is 0.2% of the pulley mass or 3 g, which ever is the greatest.

    CAD
    2D3D
    A partire da
    7.27€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Puleggia JIS V

    Puleggia JIS V

    NABEYA BI-TECH

    Both for material, processing precision and balance precision, it is a top-quality pulley exceeding JIS standards. [Features] - Its production is integrated, from casting to machining and surface treatment. - Use of a cell production system has allowed us to push the limits of producing a large number of products in small quantities with short lead times. - We have standardized additional machining for the shaft hole, keyway and set screw. - We ship even 1 piece within 3 days of actual work. - Making the arrangements for this is also easy. - A: 146 size, B: 218 size, C: 212 size, D: 74 size. - We independently added the 359 size to the 281 size for the JIS standard. - In particular, we have standardized in fine increments the small-diameter sizes used for the motor side. - Both for material, processing precision and balance precision, it is a top-quality pulley exceeding JIS standards. - The tolerance for imbalance on the outer circumference is 0.1% of the pulley mass. - For surface treatment, we carry out electrodeposition coating, with a significant anti-corrosive effect and a beautiful finish.

    CAD
    2D3D
    A partire da
    10.24€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • NS V pulegge standard A

    NS V pulegge standard A

    KANEMITSU

    A rich lineup of items with 1 – 4 hangers and nominal diameters 2 – 24 inches; dimensional accuracy complies with JIS standards, with a balanced measurement and good equilibrium, can be used directly with high speed rotational devicess. [Features] - A wide variety of machine construction: Type A, 95 varieties, Type B, 132 varieties, Type C, 102 varieties, 2° – 30° and between 1 – 6 hangers. - High performance, high quality: The NS pulley material is even and thick, making it strong. It is the safest and easiest to use product. - Dimensional accuracy complies with JIS standards, and all measures have been taken to ensure quality control. - Groove shape and dimension chart. - Maximum number of rotations: We recommend that the circumferential speed of the NS standard V pulley be set to below 25 m/s. - Minimum recommended pulley diameter: Type A, over 3° (d.e), Type B, over 5° (d.e), Type C, over 8° (d.e).

    A partire da
    7.01€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Puleggia Isomec SP

    Puleggia Isomec SP

    NABEYA BI-TECH

    International standard-compliant V pulley. Can also be used as either a general V belt or a narrow V belt. [Features] - Integrated production, from casting to machining and surface treatment. - Our use of cell production system has allowed us to push the limits of producing a large number of different product in small quantities with a short delivery time. - Attach and position shaft with a single hex wrench or socket wrench. Additionally, fastening force is equivalent to shrink fitting, due to the principal of the tapered interference fit. Safe and reliable transmission obtainable.

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    26.19€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Pulegge B standard NS V

    Pulegge B standard NS V

    KANEMITSU

    Nominal diameter 2 – 30 inches, a rich lineup of items with 1 – 5 hangers, dimensional accuracy complies with JIS standards, with balanced measurement and good equilibrium, can be used directly with high speed rotational devices. [Features] - Wide range of applications, rich variety of device construction, so that user needs can be met at a high level with high quality. - The NS pulley material is even and thick, making it strong. It is the safest and easiest to use product. - Dimensional accuracy complies with JIS standards, and all measures have been taken to ensure quality control.

    A partire da
    7.00€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • SNS JIS pulegge a V A

    SNS JIS pulegge a V A

    KANEMITSU

    Nominal diameter ø 67 – 710, a rich lineup of items 1 – 3 with 1 – 3 hangers, with balanced measurement and good equilibrium, can be used directly with high speed rotational devices. [Features] - A new series of machines has been added with the SNS JIS V pulley, with 360 types of standard types where rotational ratio and interaxis distance can be chosen freely. - The shapes, etc. have been devised in order to prevent issues with the axis and bearing damage. - Can save on the shaft and is useful for labor saving. - Can be used for machines with heavy loads and impact. - Since the accuracy of finishing is so high, the transmission efficiency is high, and a normal rotational ratio can be obtained. - All products have been measured using the balancing machine; therefore, the SNS JIS V pulley has built in balanced measurement and equilibrium, and can be used directly with high speed rotational devices.

    A partire da
    11.42€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Puleggia cuneo

    Puleggia cuneo

    NABEYA BI-TECH

    High-speed and high-power transmission possible. Large rotation ratio, can be substituted for a reduction gear.

    CAD
    2D3D
    A partire da
    11.88€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • SNS Power Sheaves (5V)

    SNS Power Sheaves (5V)

    KANEMITSU

    JIS B 1855 narrow V pulley dimensions used. Nominal diameter between ø 150 – 1,000 and 2 – 10 grooves. The medium size is also standardized. Wide selection and simple design. The material used is FC200 or higher (the larger transmission capacity is FC250) [Features] - In addition to the JIS sizes, many other medium sizes have been standardized and it has been made easy to design and comparatively free to select the ratio of rotation, distance between shafts, etc. - Utilizes a JIS B 1855 narrow V pulley dimensions and is highly compatible. - The material used is FC200 or higher (the larger transmission capacity is FC250) with a high level of precision for the various dimensions, vibration and balance so it can 100% fulfill its performance as a pulley. - The narrow V belt (3W, 5V and 8V) have an extremely high belt transmission capacity compared to the previous product (A.B.C...... models) that creates many benefits such as higher horsepower at a significantly lower cost. - Because this pulley is more compact it is able to be used on low horsepower items that became to big and couldn't be used on past products. It is also possible to switch the chain and gear transmission. - The power sheave has enough strength to withstand this. - You can have peace of mind using this product because many have been used since going on sale. - The Bando Power Ace and Power Scrum are of course compatible for use with the max edge belt

    A partire da
    85.15€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • STP IS Pulegge IS-A

    STP IS Pulegge IS-A

    KANEMITSU

    Bushing pulley for generic V-belt (A type). Safe bushing specifications, easy maintenance, using ISO standard (ISO4183) V groove. Material FC200–250 (Formerly FC20–25) [Features] - Good reputation [STB bushing] due to plenty of actual applications and easy maintenance. - Can be used with peace of mind. - The bushing is pre-machined with shaft hole and key groove, so it can be attached to the shaft as is. - The V-shaped groove uses the IOS standard, with the operational rotational speed close to the calculated value. - ISO standard (ISO4183 / V pulley for generic V belt) compliant. - You can choose from plenty of belt varieties as the bushing pulley is for generic V-belts (A, B and C types), so there are few constraints on the distance between axes, and great versatility. - With great focus on the reduction of the body weight of the pulley, since the load on the shaft has been lessened, the workability has also greatly improved. - With the swing and balance accuracy considerably enhanced, Can be used it with peace of mind.

    A partire da
    18.06€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

  • NS V Puleggia Standard C

    NS V Puleggia Standard C

    KANEMITSU

    Nominal diameter 4 – 30 inches, a rich lineup of items with 2 – 6 hangers, dimensional accuracy complies with JIS standards, with balanced measurement and good equilibrium, can be used directly with high speed rotational devices.

    A partire da
    26.50€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Pulegge di rinvio V in tecnopolimero (VIP)

    Pulegge di rinvio V in tecnopolimero (VIP)

    IMAO CORPORATION

    [Features] - A compatible V-Belt, M-, A- and B-type resin pulley idler - Integrated ball bearing type

    CAD
    2D3D
    A partire da
    12.30€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • SNS Power Sheaves (3V)

    SNS Power Sheaves (3V)

    KANEMITSU

    JIS B 1855 narrow V pulley dimensions used. Nominal diameter between ø 67 – 630 and 1 – 6 grooves. The medium size is also standardized. Wide selection and simple design. The material is FC200 or higher (the larger transmission capacity is FC250)

    A partire da
    14.69€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Puleggia con velocità variabile

    Puleggia con velocità variabile

    NABEYA BI-TECH

    Fine adjustments can be made to the speed ratio. Simple structure, precise assembly No rattling occurs from micro-vibrations or shock loads.

    CAD
    2D3D
    A partire da
    43.16€
    Consegna da
    43 giorni

    *Prezzo unitario in configurazione base

  • STB Pulegge 3V

    STB Pulegge 3V

    KANEMITSU

    Balance is well-established by the pulley's strong points - bushing that dispenses with the need for shaft hole and key processing, and a narrow V belt. Pulley replacement is easy. Both new and old JIS keys for the shaft hole diameter are standard. Material is FC200 or more.

    A partire da
    21.95€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Pulegge B JIS V SNS

    Pulegge B JIS V SNS

    KANEMITSU

    Nominal diameter ø 118 – 900, a rich lineup of items with 1 – 5 hangers, with balanced measurement and good equilibrium, can be used directly with high speed rotational devices.

    A partire da
    23.22€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Puleggia Vankin VK

    Puleggia Vankin VK

    NABEYA BI-TECH

    [Features]] - Rotation molding method imparts rigidity to the pulley and is ideal for power transmission of light-to-medium sized loads in general industrial machinery. - The pulley groove is rounded and will not damage the belt because it has no sharp parts. - Lightweight, so the overall machine, including the base and pillow block, can be minimized. - Material and finish: Disk: SPCC: Electrodeposition coating (NBK dark blue); Hub: FC200; Electrodeposition coating (NBK dark blue); Bolts: 10B22M

    CAD
    2D3D
    A partire da
    9.56€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Puleggia Poly Drive Isomec

    Puleggia Poly Drive Isomec

    NABEYA BI-TECH

    It has excellent transmission efficiency. High-speed and high-power transmission is possible. It is a lightweight and compact transmission system.

    CAD
    2D3D
    A partire da
    27.59€
    Consegna da
    43 giorni

    *Prezzo unitario in configurazione base

  • Trasmissione a variazione continua (Modello Hagino) W/L

    Trasmissione a variazione continua (Modello Hagino) W/L

    NABEYA BI-TECH

    [Features] - The rotation speed can be changed continuously. - The Hagino-type variable speed transmission disposes a variable speed pulley on a mid-point shaft. By changing that position, the speed of rotation of the pulley on the follower side can be changed by using the balance of tension of the belt, thereby varying the speed. - The alignment is automatically adjusted. - The double-side disk and middle disk move freely over the shaft. - The alignment between the drive-side pulley and the follower pulley is automatically adjusted. - For this reason, the center of the belt is constantly maintained, and the belt is not overly pulled.

    CAD
    2D3D
    A partire da
    199.91€
    Consegna da
    33 giorni

    *Prezzo unitario in configurazione base

  • STB Pulegge 5V

    STB Pulegge 5V

    KANEMITSU

    Balance is well-established by the pulley's strong points - bushing that dispenses with the need for shaft hole and key processing, and a narrow V belt. Pulley replacement is easy. Both new and old JIS keys for the shaft hole diameter are standard. Material is FC200 or more.

    A partire da
    84.92€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Boccola Isomec / Adattatore

    Boccola Isomec / Adattatore

    NABEYA BI-TECH

    ISOMEC bushings can be used simply by drilling straight holes in the revolving unit.

    A partire da
    31.08€
    Consegna da
    53 giorni

    *Prezzo unitario in configurazione base

  • Pulegge H sincrone STB

    Pulegge H sincrone STB

    KANEMITSU

    JIS K 6372 compliant. Pully that does not require shaft hole or key processing. Can be used with toothed belts (synchro belt and timing belt). Impression H, No. of teeth is up to 28 (carbon steel), No. of teeth is 30 or more (material: FC200 or higher) [Features] - Nominal diameter 4 – 30 inches, a rich lineup of items with 2 – 6 hangers, dimensional accuracy complies with JIS standards, with balanced measurement and good equilibrium, and can be used directly with high speed rotational devices

    A partire da
    62.41€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • SNS JIS Puleggia C

    SNS JIS Puleggia C

    KANEMITSU

    Nominal diameter ø 118 – 900, a rich lineup of items with 3 – 6 hangers, with balanced measurement and good equilibrium, can be used directly with high speed rotational devices. [Features] - A new series of machines has been added with the SNS JIS V pulley, with 360 types of standard types where rotational ratio and interaxis distance can be chosen freely. - The shapes, etc. have been devised in order to prevent issues with the axis and bearing damage. - Can save on the shaft and is useful for labor saving. - Can be used for machines with heavy loads and impact. - Since the accuracy of finishing is so high, the transmission efficiency is high, and a normal rotational ratio can be obtained. - All products have been measured using the balancing machine; therefore, the SNS JIS V pulley has built in balanced measurement and equilibrium, and can be used directly with high speed rotational devices.

    A partire da
    88.80€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

  • STB IS Pulegge IS-B

    STB IS Pulegge IS-B

    KANEMITSU

    Bushing pulley for generic V-belt (B type). Safe bushing specifications, easy maintenance, using ISO standard (ISO4183) V groove. Material FC200–250 (Formerly FC20–25) [Features] - Good reputation [STB bushing] due to plenty of actual applications and easy maintenance. - Can be used with peace of mind. - The bushing is pre-machined with shaft hole and key groove, so it can be attached to the shaft as is. - The V-shaped groove uses the IOS standard, with the operational rotational speed close to the calculated value - ISO standard (ISO4183 / V pulley for generic V belt) compliant. - You can choose from plenty of belt varieties as the bushing pulley is for generic V-belts (A, B and C types), so there are few constraints on the distance between axes, and great versatility. - With great focus on the reduction of the body weight of the pulley, since the load on the shaft has been lessened, the workability has also greatly improved. - With the swing and balance accuracy considerably enhanced, Can be used it with peace of mind.

    A partire da
    33.43€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

  • Puleggia a D SNS JIS V

    Puleggia a D SNS JIS V

    KANEMITSU

    Nominal diameter ø 315 – 710, a rich lineup of items with 4 – 8 hangers, with balanced measurement and good equilibrium, can be used directly with high speed rotational devices.

    A partire da
    525.88€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

  • Boccola Isomec / Mozzo con bullone

    Boccola Isomec / Mozzo con bullone

    NABEYA BI-TECH

    ISOMEC bushings can be used simply by fastening bolts into the revolving unit.

    A partire da
    43.14€
    Consegna da
    53 giorni

    *Prezzo unitario in configurazione base

  • Pulegge L sincronizzate STB

    Pulegge L sincronizzate STB

    KANEMITSU

    JIS K 6372 compliant. Pully that does not require shaft hole or key processing. Can be used with toothed belts (synchro belt and timing belt). Toothe profile L, No. of teeth is up to 36 (material: carbon steel), No. of teeth is 40 or more (material: FC200 or higher)

    A partire da
    44.73€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • SNS Power Sheaves (8V)

    SNS Power Sheaves (8V)

    KANEMITSU

    JIS B 1855 narrow V pulley dimensions used. Nominal diameter between ø 315 – 1250 and 4 – 10 grooves. The medium size is also standardized. Wide selection and simple design. The material is FC200 or higher (the larger transmission capacity is FC250)

    A partire da
    493.58€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

  • STB Pulegge 8V

    STB Pulegge 8V

    KANEMITSU

    Balance is well-established by the pulley's strong points - bushing that dispenses with the need for shaft hole and key processing, and a narrow V belt. Pulley replacement is easy. Both new and old JIS keys for the shaft hole diameter are standard. Material is FC200 or more.

    A partire da
    501.83€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

  • STB IS Puleggie IS-C

    STB IS Puleggie IS-C

    KANEMITSU

    Bushing pulley for generic V-belt (C type). Safe bushing specifications, easy maintenance, using ISO standard (ISO4183) V groove. Material FC200–250 (Formerly FC20–25) [Features] - Good reputation [STB bushing] due to plenty of actual applications and easy maintenance. - Can be used with peace of mind - The bushing is pre-machined with shaft hole and key groove, so it can be attached to the shaft as is. - The V-shaped groove uses the IOS standard, with the operational rotational speed close to the calculated value. - ISO standard (ISO4183 / V pulley for generic V belt) compliant. - You can choose from plenty of belt varieties as the bushing pulley is for generic V-belts (A, B and C types), so there are few constraints on the distance between axes, and great versatility. - With great focus on the reduction of the body weight of the pulley, since the load on the shaft has been lessened, the workability has also greatly improved. - With the swing and balance accuracy considerably enhanced, Can be used it with peace of mind.

    A partire da
    113.73€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

Configura

Ripristina

Limitare la ricerca specificando il produttore

Marchio

Prodotti commerciali MISUMI

Limitare la ricerca specificando Tipo dati CAD

  • 2D
  • 3D

Selezione immagine

Chiudi