• 10 milioni di componenti
  • Spedizione in giornata per 30.000 articoli
  • Prezzi competitivi

I nostri uffici sono aperti lun.- giov. 8:00 - 17:00, ven. 8:00-16:00 (GMT+2)

Ricerca per categoria
o fornitore

Ricerca per categoria
Componenti meccanici
Viti, bulloni, rondelle, dadi
Materiali industriali
Materiale elettrico
Controlli e parti per PC
Utensili da taglio
Materiali industriali
Materiali per imballaggio
Materiale sanitario, per uffici, per antinfortunistica
Materiali per R&D e camera bianca
Componenti per stampi deformazione lamiera
Componenti per stampi iniezione plastica

Ricerca per fornitore
Lista fornitori

Ingranaggio dritto(pagina2)

  • Numero di dati da visualizzare
    30
    45
    60
Giorni spedizione
  • Tutti gli articoli
  • Stesso giorno
  • 3 giorni o meno
  • 4 giorni o meno
  • 5 giorni o meno
  • 6 giorni o meno
  • 7 giorni o meno
  • 42 giorni o meno
  • Ruote dentate in ottone modulo 0.5

    Ruote dentate in ottone modulo 0.5

    KYOUIKU GEAR MFG

    Module 0.5 small brass spur gears. Ready-to-use products with tapped hole are also available. Products are EU RoHS compliance.

    CAD
    2D3D
    A partire da
    4.65€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate modulo 2.5 in acciaio

    Ruote dentate modulo 2.5 in acciaio

    KYOUIKU GEAR MFG

    Available in wide range of bore diameters, face width (Light load or standard face width) and shapes (shapes A, B, K and L). Ready-to-use products with key way and tapped holes are also available. Products are EU-RoHS compliance.

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    6.59€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Pignoni Standard K (Modulo 2) Dente a piena profonditá Angolo di pressione 20°

    Pignoni Standard K (Modulo 2) Dente a piena profonditá Angolo di pressione 20°

    KATAYAMA CHAIN

    The K standard pinion gear is complete with a multitude of modules and teeth numbers. It is black dye – treated with S45C as the material. This is a JIS N8-class precision pinion gear.

    A partire da
    5.27€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate modulo 0.5 in poliacetale (nero)

    Ruote dentate modulo 0.5 in poliacetale (nero)

    KYOUIKU GEAR MFG

    Low-cost type injection molded spur gears with system of accuracy ISO class 11. Products are EU RoHS compliance.

    CAD
    2D3D
    A partire da
    1.99€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Ingranaggi Cilindrici in acciaio inossidabile Modulo 1.0

    Ingranaggi Cilindrici in acciaio inossidabile Modulo 1.0

    KYOUIKU GEAR MFG

    Spur gears are made of SUS304 which have high corrosion resistance. Tapped hole are machined for easy installation. Products are EU RoHS compliance.

    • Sconto volumi elevati
    A partire da
    13.88€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate  MSG denti rettificati

    Ruote dentate MSG denti rettificati

    KOHARA GEAR INDUSTRY

    High-precision grade JIS N5 ground-tooth gear with SCM415 used for the material and with carburization and quenching of the entire surface. Hgh-precision, high-strength ground-tooth gear with excellent wear resistance suitable for machine tools and special-purpose machines. [Features] - High-precision grade JIS N5 ground-tooth spur gear using the material SCM415 and with carburizing and quenching of the entire surface. - Hgh-precision, high-strength ground-tooth gear with excellent wear resistance suitable for machine tools and special-purpose machines.

    • Sconto volumi elevati
    CAD
    2D
    A partire da
    46.21€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Ingranaggi SUSL Fair Lock

    Ingranaggi SUSL Fair Lock

    KOHARA GEAR INDUSTRY

    [Features] It is all made of stainless steel with special slit processing applied to the boss portion, and can be secured to the shaft with a single screw. It is best suited for machinery that has an aversion to rust such as electronics and chemical machinery, or places with frequent gear phase adjustment and detachment.

    CAD
    2D
    A partire da
    42.11€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate acciaio inox modulo 0.8

    Ruote dentate acciaio inox modulo 0.8

    KYOUIKU GEAR MFG

    Spur gears made of SUS304 which have high corrosion resistance. Ready-to-use products with two tapped holes are also available. Products are EU RoHS compliance.

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    11.46€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Ingranaggi cilindrici (Solido) (SFA)

    Ingranaggi cilindrici (Solido) (SFA)

    AOKI SEIMITSU KOGYO

    This is a lightweight using metal products and casting products.

    • Sconto volumi elevati
    CAD
    2D
    A partire da
    20.37€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate modulo 3.0 in acciaio

    Ruote dentate modulo 3.0 in acciaio

    KYOUIKU GEAR MFG

    Available in wide range of bore diameters, face width (Light load or standard face width) and shapes (with hub and without hub). Ready-to-use products with key way and tapped holes are also available. Products are EU-RoHS compliance.

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    10.24€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Ingranaggi conici in acciaio inossidabile Modulo 0.5

    Ingranaggi conici in acciaio inossidabile Modulo 0.5

    KYOUIKU GEAR MFG

    Spur gears made of SUS304 which have high corrosion resistance. Ready-to-use products with two tapped holes are also available. Products are EU RoHS compliance.

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    10.07€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate anti lasco modulo 1.0

    Ruote dentate anti lasco modulo 1.0

    KYOUIKU GEAR MFG

    Anti backlash spur gears are composed of two gears and they pinch its mating gears from different direction to minimize the backlash (play) between the teeth. The gears are suitable for applications of precise positioning and revolution. High-precision ground products are also available. Tapped hole is machined for easy installation. Material Chromium-molybdenum steel, Carbon steel and Aluminum. Products are EU-RoHS compliance

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    60.54€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Cremagliera e pignone in acciaio CP Passo 2

    Cremagliera e pignone in acciaio CP Passo 2

    KYOUIKU GEAR MFG

    Pinion gears for CP rack gears.Traveling distance of one turn is whole number in millimeters. Number of teeth are available in 15, 20 and 30. Ready-to-use products with tapped hole are also available. Products are EU-RoHS compliance.

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    6.02€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate rettificata di precisione (SG) modulo 1.0

    Ruote dentate rettificata di precisione (SG) modulo 1.0

    KYOUIKU GEAR MFG

    High-precision ground spur gears with system of accuracy ISO class 5. Induction hardened tooth has both high strength and superior surface durability. Additional key way, screw holes and modification of bore diameter can be carried out as the hardening was only applied around teeth. Bore diameter, outside diameter and both sides are ground. These surfaces can be used as datum surfaces when additional machining. Material Chromium molybdenum steel (ISO 34CrMo4 or 42CrMo4). Products are EU-RoHS compliance.

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    38.00€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate modulo 1.5 in poliacetale (nero)

    Ruote dentate modulo 1.5 in poliacetale (nero)

    KYOUIKU GEAR MFG

    Polyacetal spur gears have superior characteristics of low water absorption and dimensional stability compared with nylon gears. Products are EU RoHS compliance.

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    6.48€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Pignoni Standard K (Modulo 1.5) Dente a piena profonditá Angolo di pressione 20°

    Pignoni Standard K (Modulo 1.5) Dente a piena profonditá Angolo di pressione 20°

    KATAYAMA CHAIN

    The K standard pinion gear is complete with a multitude of modules and teeth numbers. It is black dye – treated with S45C as the material. This is a JIS N8-class precision pinion gear.

    A partire da
    4.26€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate CP denti rettificati

    Ruote dentate CP denti rettificati

    KOHARA GEAR INDUSTRY

    Circular pitch (CP) ground spur gears of material S45C, with induction-hardened tooth surfaces and a precision grade of JIS N7. Affordable CP ground spur gears undergoing tooth grinding machining with a reference hole. As a mating gear for the CP rack, please use in cases where the travel for a single pinion rotation is set as a whole-number length such as 100 or 150.

    • Sconto volumi elevati
    CAD
    2D
    A partire da
    41.59€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Pignoni dedicati per DR

    Pignoni dedicati per DR

    KOHARA GEAR INDUSTRY

    As the dedicated pinion gear for the molded flexible rack belongs to the flat type, they are pre-tapped so assembly is possible without drilling.

    CAD
    2D
    A partire da
    8.02€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Ingranaggio standard K (Modulo 1) con denti profondi, angolo di pressione 20°

    Ingranaggio standard K (Modulo 1) con denti profondi, angolo di pressione 20°

    KATAYAMA CHAIN

    The K standard pinion gear is complete with a multitude of modules and teeth numbers. It is black dye – treated with S45C as the material. This is a JIS N8-class precision pinion gear.

    A partire da
    3.72€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate anti lasco modulo 0.8

    Ruote dentate anti lasco modulo 0.8

    KYOUIKU GEAR MFG

    Anti backlash spur gears are composed of two gears and they pinch its mating gears from different direction to minimize the backlash (play) between the teeth. The gears are suitable for applications of precise positioning and revolution. High-precision ground products are also available. Tapped hole is machined for easy installation. Material Chromium-molybdenum steel, Carbon steel and Aluminum. Products are EU-RoHS compliance

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    54.88€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate modulo 1.5 in acciaio

    Ruote dentate modulo 1.5 in acciaio

    KYOUIKU GEAR MFG

    Spur gears made of SUS304 which have high corrosion resistance. Products are EU RoHS compliance.

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    21.77€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Ingranaggi cilindrici (Con Mozzo) (SUB)

    Ingranaggi cilindrici (Con Mozzo) (SUB)

    AOKI SEIMITSU KOGYO

    Since it made of stainless steel, it can be used in places where rust is a concern due to moisture.

    • Sconto volumi elevati
    A partire da
    11.84€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Ingranaggi dritti (SSAY)

    Ingranaggi dritti (SSAY)

    KOHARA GEAR INDUSTRY

    By cutting the boss portion of the SSY spur gear, the tooth width is header is configured at 6 mm. This is a low-profile gear that reduces the cost of material for light loads.

    CAD
    2D
    A partire da
    4.82€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate rastremate CP

    Ruote dentate rastremate CP

    KOHARA GEAR INDUSTRY

    Tempered circle pitch (CP) tapered spur gear of material SCM440. You can combine it with a CP tapered rack and adjust backlash.

    • Sconto volumi elevati
    CAD
    2D
    A partire da
    30.15€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Ingranaggi dritti con morsetti K

    Ingranaggi dritti con morsetti K

    KOHARA GEAR INDUSTRY

    A better model with a thin width configuration that can be easily fastened to the shaft with a single screw. Handy for phase alignment and fine adjustment of the gears in a narrow place, and has many places for attaching and detaching.

    CAD
    2D
    A partire da
    14.84€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate rettificata di precisione (SG) modulo 0.5

    Ruote dentate rettificata di precisione (SG) modulo 0.5

    KYOUIKU GEAR MFG

    High-precision ground spur gears with system of accuracy ISO class 5. Induction hardened tooth has both high strength and superior surface durability. Additional key way, screw holes and modification of bore diameter can be carried out as the hardening was only applied around teeth. Bore diameter, outside diameter and both sides are ground. These surfaces can be used as datum surfaces when additional machining. Material Chromium molybdenum steel (ISO 34CrMo4 or 42CrMo4). Products are EU-RoHS compliance.

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    59.13€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate rettificate di precisione (SG) modulo 1.5

    Ruote dentate rettificate di precisione (SG) modulo 1.5

    KYOUIKU GEAR MFG

    High-precision ground spur gears with system of accuracy ISO class 5. Induction hardened tooth has both high strength and superior surface durability. Additional key way, screw holes and modification of bore diameter can be carried out as the hardening was only applied around teeth. Bore diameter, outside diameter and both sides are ground. These surfaces can be used as datum surfaces when additional machining. Material Chromium molybdenum steel (ISO 34CrMo4 or 42CrMo4). Products are EU-RoHS compliance.

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    35.44€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Ingranaggi a ruota HF

    Ingranaggi a ruota HF

    AOKI SEIMITSU KOGYO

    A trusted wheel gear from the manufacturers of the decelerator.

    • Sconto volumi elevati
    A partire da
    6.76€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate modulo 2.0 in poliacetale (nero)

    Ruote dentate modulo 2.0 in poliacetale (nero)

    KYOUIKU GEAR MFG

    Polyacetal spur gears have superior characteristics of low water absorption and dimensional stability compared with nylon gears. Products are EU RoHS compliance.

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    8.53€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate modulo 4.0 in acciaio

    Ruote dentate modulo 4.0 in acciaio

    KYOUIKU GEAR MFG

    Spur gears having large hub diameter and small bore diameter for additional work. Its short length of hub compared with the conventional product was designed for space saving and weight reduction. Products are EU-RoHS compliance.

    • Sconto volumi elevati
    A partire da
    21.43€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate rettificate di precisione (SG) modulo 2.0

    Ruote dentate rettificate di precisione (SG) modulo 2.0

    KYOUIKU GEAR MFG

    High-precision ground spur gears with system of accuracy ISO class 5. Induction hardened tooth has both high strength and superior surface durability. Additional key way, screw holes and modification of bore diameter can be carried out as the hardening was only applied around teeth. Bore diameter, outside diameter and both sides are ground. These surfaces can be used as datum surfaces when additional machining. Material Chromium molybdenum steel (ISO 34CrMo4 or 42CrMo4). Products are EU-RoHS compliance.

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    32.92€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate modulo 2.0 in acciaio inox

    Ruote dentate modulo 2.0 in acciaio inox

    KYOUIKU GEAR MFG

    Spur gears made of SUS304 which have high corrosion resistance. Products are EU RoHS compliance.

    • Sconto volumi elevati
    A partire da
    26.47€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate vincolate PU

    Ruote dentate vincolate PU

    KOHARA GEAR INDUSTRY

    This gear is resistant to rust, with MC901 fused to the teeth, and SUS303 to the boss. High performance plastic gear, ideal for food processing equipment and electronic machinery which will not tolerate rust. High-performance plastic gears that can be used without lubrication.

    • Sconto volumi elevati
    CAD
    2D
    A partire da
    93.14€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Ingranaggio standard K (Modulo 2.5) con denti profondi, angolo di pressione 20°

    Ingranaggio standard K (Modulo 2.5) con denti profondi, angolo di pressione 20°

    KATAYAMA CHAIN

    The K standard pinion gear is complete with a multitude of modules and teeth numbers. It is black dye – treated with S45C as the material. This is a JIS N8-class precision pinion gear.

    A partire da
    7.11€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Ingranaggi Cilindrici in acciaio inossidabile Modulo 0.75

    Ingranaggi Cilindrici in acciaio inossidabile Modulo 0.75

    KYOUIKU GEAR MFG

    Spur gears made of SUS304 which have high corrosion resistance. Ready-to-use products with tapped hole is also availbale. Products are EU RoHS compliance.

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    11.19€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Ingranaggi cilindrici in acciaio Modulo 0.75

    Ingranaggi cilindrici in acciaio Modulo 0.75

    KYOUIKU GEAR MFG

    Module 0.5 small spur gears. Ready-to-use products with tapped hole are also available. Products are EU RoHS compliance.

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    5.21€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate rettificata di precisione (SG) modulo 0.8

    Ruote dentate rettificata di precisione (SG) modulo 0.8

    KYOUIKU GEAR MFG

    High-precision ground spur gears with system of accuracy ISO class 5. Induction hardened tooth has both high strength and superior surface durability. Additional key way, screw holes and modification of bore diameter can be carried out as the hardening was only applied around teeth. Bore diameter, outside diameter and both sides are ground. These surfaces can be used as datum surfaces when additional machining. Material Chromium molybdenum steel (ISO 34CrMo4 or 42CrMo4). Products are EU-RoHS compliance.

    CAD
    2D3D
    A partire da
    54.22€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Pignoni Standard K (Modulo 5) Dente a tutta profonditá con angolo di pressione di 20°

    Pignoni Standard K (Modulo 5) Dente a tutta profonditá con angolo di pressione di 20°

    KATAYAMA CHAIN

    The K standard pinion gear is complete with a multitude of modules and teeth numbers. It is black dye – treated with S45C as the material. This is a JIS N8-class precision pinion gear.

    A partire da
    27.67€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate modulo 3.0 in poliacetale (nero)

    Ruote dentate modulo 3.0 in poliacetale (nero)

    KYOUIKU GEAR MFG

    Polyacetal spur gears have superior characteristics of low water absorption and dimensional stability compared with nylon gears. Products are EU RoHS compliance.

    CAD
    2D3D
    A partire da
    15.14€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate rettificate di precisione (SG) modulo 3.0

    Ruote dentate rettificate di precisione (SG) modulo 3.0

    KYOUIKU GEAR MFG

    High-precision ground spur gears with system of accuracy ISO class 5. Induction hardened tooth has both high strength and superior surface durability. Additional key way, screw holes and modification of bore diameter can be carried out as the hardening was only applied around teeth. Bore diameter, outside diameter and both sides are ground. These surfaces can be used as datum surfaces when additional machining. Material Chromium molybdenum steel (ISO 34CrMo4 or 42CrMo4). Products are EU-RoHS compliance.

    • Sconto volumi elevati
    CAD
    2D3D
    A partire da
    41.58€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate con albero denti rettificati

    Ruote dentate con albero denti rettificati

    KOHARA GEAR INDUSTRY

    They are ground spur gears of material S45C, with tooth surfaces undergoing induction hardening and a precision grade of JIS N7. With gears that have a small number of teeth for an integrated shaft, the shaft section can be machined and can be included as a direct bearing with high precision.

    CAD
    2D
    A partire da
    49.45€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate inox (SUSA)

    Ruote dentate inox (SUSA)

    KOHARA GEAR INDUSTRY

    Stainless steel spur gears of material SUS303 that stand up to rust. We have made a better shape that has lowered material cost, and made a stainless steel spur gear that is easy to use, reducing the cost. Ideal for food machinery, chemical machinery, drug machinery and other machines where corrosion is unwanted.

    • Sconto volumi elevati
    CAD
    2D
    A partire da
    45.02€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate inox CP

    Ruote dentate inox CP

    KOHARA GEAR INDUSTRY

    Spur gears of SUS303 stainless steel. Please for machines where corrosion is unwanted, such as food machinery, or as a mating gear for the CP rack, where the travel for a single pinion rotation is set as a whole-number length such as 100 or 150.

    • Sconto volumi elevati
    CAD
    2D
    A partire da
    27.18€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Ingranaggio standard K (Modulo 6) con denti profondi, angolo di pressione 20°

    Ingranaggio standard K (Modulo 6) con denti profondi, angolo di pressione 20°

    KATAYAMA CHAIN

    The K standard pinion gear is complete with a multitude of modules and teeth numbers. It is black dye – treated with S45C as the material. This is a JIS N8-class precision pinion gear.

    A partire da
    43.03€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Ruote dentate modulo 5.0 in acciaio

    Ruote dentate modulo 5.0 in acciaio

    KYOUIKU GEAR MFG

    Spur gears having large hub diameter and small bore diameter for additional work. Its short length of hub compared with the conventional product was designed for space saving and weight reduction. Products are EU-RoHS compliance.

    A partire da
    36.29€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

Configura

Ripristina

Stock

Limitare la ricerca specificando Spec./Dim.

Limitare la ricerca specificando il produttore

Marchio

Prodotti MISUMI
  • Prodotti convenienti
Prodotti commerciali MISUMI

Limitare la ricerca specificando Tipo dati CAD

  • 2D
  • 3D

Selezione immagine

Chiudi