Generatori ed estrattori di vuoto（Funzione aggiuntiva：Valvola per generatore di vuoto）

?* Informazioni su tempi di consegna e prezzi

• 

  ZK2, Unità per il vuoto, Eiettore con valvola

  SMC

  A vacuum unit ejector system manufactured by SMC
  [Features]
  · Built-in digital pressure switch for vacuums, with energy-saving function. Cuts the air supply upon reaching vacuum: Leading to 90% reduction in air consumption
  · Has a 2-stage ejector structure that increases suction flow rate by 50% and reduces air consumption by 30% (compared to SMC's single-stage ejectors)
  · Compact and lightweight, with a 28% reduction in volume (88 cm³) and a 59% reduction in weight (81 g) compared to conventional products
  · Reduced wiring for single units as well as manifolding.
  · Once the supply valve is switched ON, the vacuum generation state is maintained even if the power is cut off. This reduces power consumption.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	194.00 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  ZM, eiettore per il vuoto con valvola e commutatore (sistema metrico)

  SMC

  An ejector manufactured by SMC.
  [Features]
  · All-in-one.
  · Capable of manifolding.
  · Maximum suction flow rate increased by 40%.
  · Maximum vacuum pressure -84 kPa.
  · Compact and lightweight.
  · Air-operated type.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	152.89 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Generatore di vuoto per ventilazione gas di processo serie VG

  CKD

  -L'uso del fluido di alimentazione può essere notevolmente ridotto. - Il prodotto è resistente alle fluttuazioni di pressione sul lato primario.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	521.62 €
  Consegna da ：	9 giorni

  *Prezzo unitario in configurazione base

• 

  Unità vuoto, sistema pompa per vuoto serie ZX

  SMC

  Vacuum unit and vacuum pump system capable of manifolding.
  [Features]
  · Ideal for electronic components and small precision components weighing up to 100 g.
  · Modular design makes it possible to combine the most suitable functions.
  · Compact and lightweight (120 g with complete set), which makes it ideal for installing actuators.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	177.40 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  VG Generatore di vuoto interruttore del vuoto con alimentatore del vuoto / Valvola di rilascio e filtro realizzati orizzontalmente nel cavo

  NIHON PISCO

  Makes a unit of a vacuum switch, vacuum break valve, etc. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Makes a unit of a vacuum switch, vacuum break valve, etc., and allows selection of a type suited to the purpose.
  · Makes available 3 types, with a former analog output added to the vacuum switch output specification, a 2‑point switch output, and an inexpensive analog output alone.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	219.17 €
  Consegna da ：	12 giorni

  *Prezzo unitario in configurazione base

• 

  Modello A dritto per trasporto materiale granuloso, modello singolo

  NIHON PISCO

  *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.
  · Transports small indefinite shaped working material such as granules, powder and fiber.

  Dati CAD disponibili in formato 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	48.83 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Modello B dritto per trasporto materiale granuloso, modello singolo

  NIHON PISCO

  Transports small indefinite shaped working material such as granules, powder and fiber.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.

  Dati CAD disponibili in formato 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	48.96 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Modello C dritto per trasporto materiale granuloso, modello singolo

  NIHON PISCO

  *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.
  · Transports small indefinite shaped working material such as granules, powder and fiber.

  Dati CAD disponibili in formato 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	52.93 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  Modello D dritto per trasporto materiale granuloso, modello singolo

  NIHON PISCO

  Transports small indefinite shaped working material such as granules, powder and fiber. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.

  Dati CAD disponibili in formato 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	53.02 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  Modello A nipplo per trasporto materiale granuloso, modello singolo

  NIHON PISCO

  Transports small indefinite shaped working material such as granules, powder and fiber. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.

  Dati CAD disponibili in formato 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	43.23 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Modello B nipplo per trasporto materiale granuloso, modello singolo

  NIHON PISCO

  Transports small indefinite shaped working material such as granules, powder and fiber. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.

  Dati CAD disponibili in formato 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	52.12 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Modello A dritto unione per trasporto materiale granuloso, modello singolo

  NIHON PISCO

  Transports small indefinite shaped working material such as granules, powder and fiber.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	49.74 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Modello B dritto unione per trasporto materiale granuloso, modello singolo

  NIHON PISCO

  *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.
  · Transports small indefinite shaped working material such as granules, powder and fiber.

  Dati CAD disponibili in formato 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	49.84 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Generatore di vuoto con sensore di pressione serie VQ

  NIHON PISCO

  *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  Combination type vacuum generator, optimal for controlling large flow rates.
  Pressure sensor specification (30‑mm wide, dual-output, NPN open collector output pressure sensor)

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	230.01 €
  Consegna da ：	12 giorni

  *Prezzo unitario in configurazione base

• 

  ZR, unità per il vuoto grande portata - tipo eiettore

  SMC

  A vacuum unit ejector system manufactured by SMC.
  [Features]
  · Large suction flow rate, suitable when used with large-sized pads or multiple pads.
  · Nozzle diameters: ø1.0, ø1.3, ø1.5, ø1.8, ø2.0
  · Vacuum unit suitable for workpieces of 0.5 to 5 kg.
  · Modular design makes it possible to combine functions as required.
  · Safe due to vacuum self-holding function by means of double solenoid valves.
  · Compact and lightweight.
  · Capable of manifolding.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	277.47 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Modulo per il vuoto di grandi dimensioni: sistema pompa per vuoto serie ZR

  SMC

  Un sistema di pompa per vuoto a modulo vuoto ideale per l'uso con ventose multiple o di grandi dimensioni.
  [Caratteristiche]
  · Ideale per l'uso con ventose multiple o di grandi dimensioni.
  · Un modulo per il vuoto adatto a pezzi di dimensioni comprese tra 0,5 e 5 kg.
  · Il design modulare consente di combinare le funzioni secondo necessità.
  · La funzione di autotenuta del vuoto tramite elettrovalvole a doppia garantisce la sicurezza.
  · Compatto e leggero.
  · Adatto per l'uso nei collettori.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	302.31 €
  Consegna da ：	26 giorni

  *Prezzo unitario in configurazione base

• 

  ZX, unità per vuoto singola - tipo eiettore (sistema metrico)

  SMC

  A vacuum unit ejector system best suited to small precision components.
  [Features]
  · Electronic components weighing up to 100 g.
  · Modular design makes it possible to combine the most suitable functions.
  · Compact and lightweight (120 g with complete set), which makes it ideal for installing actuators.
  · Ejector nozzles available in 0.5 to 1.0‑mm diameters (suction flow rate 5 to 22 L/min [ANR]).
  · Capable of manifolding.

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	150.89 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Unità di vuoto / rilascio serie VQD1000-V

  SMC

  Un modulo di vuoto/rilascio che non richiede un circuito limitatore per l’aria di rilascio.
  [Caratteristiche]
  · Velocità di risposta 13 msec (a 500 mm*).
  · 18,5 msec (a 1.000 mm*).
  *Distanza dal modulo al pezzo.
  · Distacco agevole dei pezzi senza sorpassamento.
  · Nessuno scoppio del pezzo causato dall’aria di rilascio.
  · Non è necessario regolare la temporizzazione quando si passa dal vuoto alla pressione positiva (controllo a segnale singolo).
  · È possibile selezionare le specifiche N.A. (tipo con adesione del vuoto quando non eccitato) e la specifica N.C. (tipo con arresto del vuoto quando non eccitato).

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	119.81 €
  Consegna da ：	26 giorni

  *Prezzo unitario in configurazione base

Loading...