One-Step（Surface treatment：Nitrided）
Selection Support: Stepped Center Pins
- Technical information
- STEPPED CENTER PINS
?* Informazioni su tempi di consegna e prezzi
-
Perni centrali / forma della testa selezionabile / acciaio per utensili / nitrurato / a gradini / punta conica / estremità lavorata / tolleranza albero -0,01 ─ -0,02
MISUMI
- Dati CAD disponibili in formato 2D / 3D
› Configura oraConsegna da ： Preventivo -
› Configura ora
Consegna da ： Preventivo -
› Configura ora
Consegna da ： Preventivo
| Marchio |
|---|
| Serie prodotto |
| CAD |
| A partire da∗ |
| Consegna da |
| Material |
| Surface treatment |
| Head thickness |
| Shaft diameter tolerance |
| Shape |
| D/P (Shaft diameter)(mm) |
| Step (Step shape) |
| Shape (Tip shape) |
| Applicable sleeve hole diameter tolerance |
| With/without cooling hole |
|
|
| |
| Marchio | MISUMI | MISUMI | MISUMI |
| Serie prodotto | |||
| CAD |
|
|
|
| A partire da∗ | - | - | - |
| Consegna da | Preventivo | Preventivo | Preventivo |
| Material | SKD61 | SKD61 | SKD61 |
| Surface treatment | Nitrided | Nitrided | Nitrided |
| Head thickness | 4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS) | 4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS) | 4mm(T4) / 6mm(JIS) / 8mm(JIS) |
| Shaft diameter tolerance | -0.01/-0.02 (Reference tolerance) | -0.01/-0.02 (Reference tolerance) | -0.01/-0.02 (Reference tolerance) |
| Shape | One-step | One-step | One-step |
| D/P (Shaft diameter)(mm) | 1.5 ～ 16 | 1.5 ～ 20 | 6 ～ 16 |
| Step (Step shape) | A / B / C / D / E | A / B / C / D / E | A / B / C / D / E |
| Shape (Tip shape) | No processing / C / G / T / R / B | No processing / C / G / T / R / B | No processing / C / G / T / R / B |
| Applicable sleeve hole diameter tolerance | +0.01/0 or H7 | +0.01/0 or H7 | +0.01/0 or H7 |
| With/without cooling hole | No | No | Yes |
Loading...
Seleziona per:
-
Material
- SKH51
- SKD61
-
Surface treatment
- No
- Nitrided
-
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
- 4mm(JIS)
-
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
- -0.01/-0.02 (Reference tolerance)
-
Shape
-
One-step
-
Stepped one-step
-
One-step
-
D/P (Shaft diameter)(mm)
-
Step (Step shape)
-
A
-
B
-
C
-
D
-
E
-
A
-
Shape (Tip shape)
-
No processing
-
C
-
G
-
T
-
R
-
B
-
No processing
-
Applicable sleeve hole diameter tolerance
- +0.005/0
- +0.01/0 or H7
-
With/without cooling hole
- Yes
- No
Produttore
Tipo dati CAD
-
- 2D
- 3D
Categorie relative a One-Step
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.