• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione
  • Lavori di manutenzione: questa pagina non sarà disponibile dalle ore 3:00 21/4/2024 alle ore 0:00 (CET) 22/4/2024 per lavori di manutenzione al server. Ci scusiamo per questo inconveniente.

Punzoni per il taglio delle forme

Punzoni per il taglio delle forme

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

  • Punzoni per il taglio delle forme
  • Punzoni per il taglio delle forme
  • Punzoni per il taglio delle forme
  • Punzoni per il taglio delle forme
  • Punzoni per il taglio delle forme
  • Punzoni per il taglio delle forme

MISUMI

MISUMI

  • SKH51
  • SKD11
  • POWDER HSS

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
  2. 2
  3. Avanti >>
Codice componente
HFCD-[40-100/10]-P[3-50/0.01]-W[2-30/0.01]-F[0-90/90]
HFCD-LC[20-99.9/0.1]-P[3-50/0.01]-W[2-30/0.01]-F[0-90/90]
HFCE-[40-100/10]-P[3-30/0.01]-W[2-30/0.01]-F0
HFCE-LC[20-99.9/0.1]-P[3-30/0.01]-W[2-30/0.01]-F0
HFCG-[40-100/10]-P[3-30/0.01]-W[2-30/0.01]-F0
HFCG-LC[20-99.9/0.1]-P[3-30/0.01]-W[2-30/0.01]-F0
HFCR-[40-100/10]-P[3-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]-F[0-270/90]
HFCR-LC[20-99.9/0.1]-P[3-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]-F[0-270/90]
HKCD-[40-100/10]-P[2-50/0.01]-W[2-30/0.01]-K[0,​90]-T[2-100/0.1]
HKCD-LC[20-99.9/0.1]-P[2-50/0.01]-W[2-30/0.01]-K[0,​90]-T[2-100/0.1]
HKCE-[40-100/10]-P[2-30/0.01]-W[2-30/0.01]-T[2-100/0.1]-K[0,​90]
HKCE-LC[20-99.9/0.1]-P[2-30/0.01]-W[2-30/0.01]-T[2-100/0.1]-K[0,​90]
HKCG-[40-100/10]-P[2-30/0.01]-W[2-30/0.01]-T[2-100/0.1]-K[0,​90]
HKCG-LC[20-99.9/0.1]-P[2-30/0.01]-W[2-30/0.01]-T[2-100/0.1]-K[0,​90]
HKCR-[40-100/10]-P[2-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]-T[2-100/0.1]-K[0,​90]
HKCR-LC[20-99.9/0.1]-P[2-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]-T[2-100/0.1]-K[0,​90]
HMCD-[40-100/10]-P[4-50/0.01]-W[4-30/0.01]
HMCD-LC[30-99.9/0.1]-P[4-50/0.01]-W[4-30/0.01]
HMCE-[40-100/10]-P[4-30/0.01]-W[4-30/0.01]
HMCE-LC[30-99.9/0.1]-P[4-30/0.01]-W[4-30/0.01]
HMCG-[40-100/10]-P[4-30/0.01]-W[4-30/0.01]
HMCG-LC[30-99.9/0.1]-P[4-30/0.01]-W[4-30/0.01]
HMCR-[40-100/10]-P[4-30/0.01]-W[4-30/0.01]-R[0.15-15/0.01]
HMCR-LC[30-99.9/0.1]-P[4-30/0.01]-W[4-30/0.01]-R[0.15-15/0.01]
HPCD-[40-100/10]-P[2-50/0.01]-W[2-30/0.01]
HPCD-LC[20-99.9/0.1]-P[2-50/0.01]-W[2-30/0.01]
HPCE-[40-100/10]-P[2-50/0.01]-W[2-30/0.01]
HPCE-LC[20-99.9/0.1]-P[2-50/0.01]-W[2-30/0.01]
HPCG-[40-100/10]-P[2-50/0.01]-W[2-30/0.01]
HPCG-LC[20-99.9/0.1]-P[2-50/0.01]-W[2-30/0.01]
HPCR-[40-100/10]-P[2-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]
HPCR-LC[20-99.9/0.1]-P[2-30/0.01]-W[2-30/0.01]-R[0.15-15/0.01]
HSFCD-[40-100/10]-P[5-30/0.01]-W[5-30/0.01]-F[0,​90]
HSFCD-LC[20-99.9/0.1]-P[5-30/0.01]-W[5-30/0.01]-F[0,​90]
HSFCE-[40-100/10]-P[5-30/0.01]-W[5-30/0.01]-F[0,​90]
HSFCE-LC[20-99.9/0.1]-P[5-30/0.01]-W[5-30/0.01]-F[0,​90]
HSFCG-[40-100/10]-P[5-30/0.01]-W[5-30/0.01]-F[0,​90]
HSFCG-LC[20-99.9/0.1]-P[5-30/0.01]-W[5-30/0.01]-F[0,​90]
HSFCR-[40-100/10]-P[5-30/0.01]-W[5-30/0.01]-R[0.15-15/0.01]-F[0,​90]
HSFCR-LC[20-99.9/0.1]-P[5-30/0.01]-W[5-30/0.01]-R[0.15-15/0.01]-F[0,​90]
HSKCD-[40-100/10]-P[5-30/0.01]-W[5-30/0.01]-K[0,​90]-T[2-100/0.1]
HSKCD-LC[20-99.9/0.1]-P[5-30/0.01]-W[5-30/0.01]-K[0,​90]-T[2-100/0.1]
HSKCE-[40-100/10]-P[5-30/0.01]-W[5-30/0.01]-T[2-100/0.1]-K[0,​90]
HSKCE-LC[20-99.9/0.1]-P[5-30/0.01]-W[5-30/0.01]-T[2-100/0.1]-K[0,​90]
HSKCG-[40-100/10]-P[5-30/0.01]-W[5-30/0.01]-T[2-100/0.1]-K[0,​90]
HSKCG-LC[20-99.9/0.1]-P[5-30/0.01]-W[5-30/0.01]-T[2-100/0.1]-K[0,​90]
HSKCR-[40-100/10]-P[5-30/0.01]-W[5-30/0.01]-R[0.15-15/0.01]-T[2-100/0.1]-K[0,​90]
HSKCR-LC[20-99.9/0.1]-P[5-30/0.01]-W[5-30/0.01]-R[0.15-15/0.01]-T[2-100/0.1]-K[0,​90]
HSMCD-[40-100/10]-P[5-30/0.01]-W[5-30/0.01]
HSMCD-LC[30-99.9/0.1]-P[5-30/0.01]-W[5-30/0.01]
HSMCE-[40-100/10]-P[5-30/0.01]-W[5-30/0.01]
HSMCE-LC[30-99.9/0.1]-P[5-30/0.01]-W[5-30/0.01]
HSMCG-[40-100/10]-P[5-30/0.01]-W[5-30/0.01]
HSMCG-LC[30-99.9/0.1]-P[5-30/0.01]-W[5-30/0.01]
HSMCR-[40-100/10]-P[5-30/0.01]-W[5-30/0.01]-R[0.15-15/0.01]
HSMCR-LC[30-99.9/0.1]-P[5-30/0.01]-W[5-30/0.01]-R[0.15-15/0.01]
HSPCD-[40-100/10]-P[5-30/0.01]-W[5-30/0.01]
HSPCD-LC[20-99.9/0.1]-P[5-30/0.01]-W[5-30/0.01]
HSPCE-[40-100/10]-P[5-30/0.01]-W[5-30/0.01]
HSPCE-LC[20-99.9/0.1]-P[5-30/0.01]-W[5-30/0.01]
Codice componenteQuantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSTip shape Material Shank (mounting part) shape F (Flange position designation)
(°) 		K (Key groove position designation)
(°) 		L (L dimension)
(mm) 		LC (Full length alteration)
(mm) 		P (Tip dimension)
(mm) 		R (Tip corner R)
(mm) 		T (Key groove position)
(mm) 		W (Tip dimension)
(mm) 		WF (Flange position designation)
(°)
1 Preventivo 10DSKH51 or SKD11 EquivalentSingle-flanged0 ～ 90-40 ～ 100-3 ～ 50--2 ～ 30-
1 Preventivo 10DSKH51 or SKD11 EquivalentSingle-flanged0 ～ 90--20 ～ 99.93 ～ 50--2 ～ 30-
1 Preventivo 10ESKH51 or SKD11 EquivalentSingle-flanged0-40 ～ 100-3 ～ 30--2 ～ 30-
1 Preventivo 10ESKH51 or SKD11 EquivalentSingle-flanged0--20 ～ 99.93 ～ 30--2 ～ 30-
1 Preventivo 10GSKH51 or SKD11 EquivalentSingle-flanged0-40 ～ 100-3 ～ 30--2 ～ 30-
1 Preventivo 10GSKH51 or SKD11 EquivalentSingle-flanged0--20 ～ 99.93 ～ 30--2 ～ 30-
1 Preventivo 10RSKH51 or SKD11 EquivalentSingle-flanged0 ～ 270-40 ～ 100-3 ～ 300.15 ～ 15-2 ～ 30-
1 Preventivo 10RSKH51 or SKD11 EquivalentSingle-flanged0 ～ 270--20 ～ 99.93 ～ 300.15 ～ 15-2 ～ 30-
1 Preventivo 10DSKH51 or SKD11 EquivalentWith key groove-0 ～ 9040 ～ 100-2 ～ 50-2 ～ 1002 ～ 30-
1 Preventivo 10DSKH51 or SKD11 EquivalentWith key groove-0 ～ 90-20 ～ 99.92 ～ 50-2 ～ 1002 ～ 30-
1 Preventivo 10ESKH51 or SKD11 EquivalentWith key groove-0 ～ 9040 ～ 100-2 ～ 30-2 ～ 1002 ～ 30-
1 Preventivo 10ESKH51 or SKD11 EquivalentWith key groove-0 ～ 90-20 ～ 99.92 ～ 30-2 ～ 1002 ～ 30-
1 Preventivo 10GSKH51 or SKD11 EquivalentWith key groove-0 ～ 9040 ～ 100-2 ～ 30-2 ～ 1002 ～ 30-
1 Preventivo 10GSKH51 or SKD11 EquivalentWith key groove-0 ～ 90-20 ～ 99.92 ～ 30-2 ～ 1002 ～ 30-
1 Preventivo 10RSKH51 or SKD11 EquivalentWith key groove-0 ～ 9040 ～ 100-2 ～ 300.15 ～ 152 ～ 1002 ～ 30-
1 Preventivo 10RSKH51 or SKD11 EquivalentWith key groove-0 ～ 90-20 ～ 99.92 ～ 300.15 ～ 152 ～ 1002 ～ 30-
1 Preventivo 10DSKH51 or SKD11 EquivalentTapped--40 ～ 100-4 ～ 50--4 ～ 30-
1 Preventivo 10DSKH51 or SKD11 EquivalentTapped---30 ～ 99.94 ～ 50--4 ～ 30-
1 Preventivo 10ESKH51 or SKD11 EquivalentTapped--40 ～ 100-4 ～ 30--4 ～ 30-
1 Preventivo 10ESKH51 or SKD11 EquivalentTapped---30 ～ 99.94 ～ 30--4 ～ 30-
1 Preventivo 10GSKH51 or SKD11 EquivalentTapped--40 ～ 100-4 ～ 30--4 ～ 30-
1 Preventivo 10GSKH51 or SKD11 EquivalentTapped---30 ～ 99.94 ～ 30--4 ～ 30-
1 Preventivo 10RSKH51 or SKD11 EquivalentTapped--40 ～ 100-4 ～ 300.15 ～ 15-4 ～ 30-
1 Preventivo 10RSKH51 or SKD11 EquivalentTapped---30 ～ 99.94 ～ 300.15 ～ 15-4 ～ 30-
1 Preventivo 10DSKH51 or SKD11 EquivalentStandard--40 ～ 100-2 ～ 50--2 ～ 30-
1 Preventivo 10DSKH51 or SKD11 EquivalentStandard---20 ～ 99.92 ～ 50--2 ～ 30-
1 Preventivo 10ESKH51 or SKD11 EquivalentStandard--40 ～ 100-2 ～ 50--2 ～ 30-
1 Preventivo 10ESKH51 or SKD11 EquivalentStandard---20 ～ 99.92 ～ 50--2 ～ 30-
1 Preventivo 10GSKH51 or SKD11 EquivalentStandard--40 ～ 100-2 ～ 50--2 ～ 30-
1 Preventivo 10GSKH51 or SKD11 EquivalentStandard---20 ～ 99.92 ～ 50--2 ～ 30-
1 Preventivo 10RSKH51 or SKD11 EquivalentStandard--40 ～ 100-2 ～ 300.15 ～ 15-2 ～ 30-
1 Preventivo 10RSKH51 or SKD11 EquivalentStandard---20 ～ 99.92 ～ 300.15 ～ 15-2 ～ 30-
1 Preventivo 10DSKH51 EquivalentSingle-flanged0 ～ 90-40 ～ 100-5 ～ 30--5 ～ 30-
1 Preventivo 10DSKH51 EquivalentSingle-flanged0 ～ 90--20 ～ 99.95 ～ 30--5 ～ 30-
1 Preventivo 10ESKH51 EquivalentSingle-flanged0 ～ 90-40 ～ 100-5 ～ 30--5 ～ 30-
1 Preventivo 10ESKH51 EquivalentSingle-flanged0 ～ 90--20 ～ 99.95 ～ 30--5 ～ 30-
1 Preventivo 10GSKH51 EquivalentSingle-flanged0 ～ 90-40 ～ 100-5 ～ 30--5 ～ 30-
1 Preventivo 10GSKH51 EquivalentSingle-flanged0 ～ 90--20 ～ 99.95 ～ 30--5 ～ 30-
1 Preventivo 10RSKH51 EquivalentSingle-flanged0 ～ 90-40 ～ 100-5 ～ 300.15 ～ 15-5 ～ 30-
1 Preventivo 10RSKH51 EquivalentSingle-flanged0 ～ 90--20 ～ 99.95 ～ 300.15 ～ 15-5 ～ 30-
1 Preventivo 10DSKH51 EquivalentWith key groove-0 ～ 9040 ～ 100-5 ～ 30-2 ～ 1005 ～ 30-
1 Preventivo 10DSKH51 EquivalentWith key groove-0 ～ 90-20 ～ 99.95 ～ 30-2 ～ 1005 ～ 30-
1 Preventivo 10ESKH51 EquivalentWith key groove-0 ～ 9040 ～ 100-5 ～ 30-2 ～ 1005 ～ 30-
1 Preventivo 10ESKH51 EquivalentWith key groove-0 ～ 90-20 ～ 99.95 ～ 30-2 ～ 1005 ～ 30-
1 Preventivo 10GSKH51 EquivalentWith key groove-0 ～ 9040 ～ 100-5 ～ 30-2 ～ 1005 ～ 30-
1 Preventivo 10GSKH51 EquivalentWith key groove-0 ～ 90-20 ～ 99.95 ～ 30-2 ～ 1005 ～ 30-
1 Preventivo 10RSKH51 EquivalentWith key groove-0 ～ 9040 ～ 100-5 ～ 300.15 ～ 152 ～ 1005 ～ 30-
1 Preventivo 10RSKH51 EquivalentWith key groove-0 ～ 90-20 ～ 99.95 ～ 300.15 ～ 152 ～ 1005 ～ 30-
1 Preventivo 10DSKH51 EquivalentTapped--40 ～ 100-5 ～ 30--5 ～ 30-
1 Preventivo 10DSKH51 EquivalentTapped---30 ～ 99.95 ～ 30--5 ～ 30-
1 Preventivo 10ESKH51 EquivalentTapped--40 ～ 100-5 ～ 30--5 ～ 30-
1 Preventivo 10ESKH51 EquivalentTapped---30 ～ 99.95 ～ 30--5 ～ 30-
1 Preventivo 10GSKH51 EquivalentTapped--40 ～ 100-5 ～ 30--5 ～ 30-
1 Preventivo 10GSKH51 EquivalentTapped---30 ～ 99.95 ～ 30--5 ～ 30-
1 Preventivo 10RSKH51 EquivalentTapped--40 ～ 100-5 ～ 300.15 ～ 15-5 ～ 30-
1 Preventivo 10RSKH51 EquivalentTapped---30 ～ 99.95 ～ 300.15 ～ 15-5 ～ 30-
1 Preventivo 10DSKH51 EquivalentStandard--40 ～ 100-5 ～ 30--5 ～ 30-
1 Preventivo 10DSKH51 EquivalentStandard---20 ～ 99.95 ～ 30--5 ～ 30-
1 Preventivo 10ESKH51 EquivalentStandard--40 ～ 100-5 ～ 30--5 ～ 30-
1 Preventivo 10ESKH51 EquivalentStandard---20 ～ 99.95 ～ 30--5 ～ 30-

Loading...

  1. 1
  2. 2
  3. Avanti >>
 

Informazioni di base

Shank type Straight With/without jector W/O Surface treatment None

Configura

Ripristina

120Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Tip shape

    • D
    • R
    • E
    • G

    Ripristina

  • Material

    • SKH51 Equivalent
    • Powdered high-speed steel
    • SKH51 or SKD11 Equivalent

    Ripristina

  • Shank (mounting part) shape

    • Standard
    • Tapped
    • With key groove
    • Single-flanged
    • Double-flanged

    Ripristina

  • F (Flange position designation)(°)

    • 0
    • 90

     [0-270/90°pezzi]

    Ripristina

  • K (Key groove position designation)(°)

    • 0
    • 90

    Ripristina

  • L (L dimension)(mm)

     [40-100/10mmpezzi]

    Ripristina

  • LC (Full length alteration)(mm)

     [20-99.9/0.1mmpezzi]

    Ripristina

  • P (Tip dimension)(mm)

     [2-50/0.01mmpezzi]

    Ripristina

  • R (Tip corner R)(mm)

     [0.15-15/0.01mmpezzi]

    Ripristina

  • T (Key groove position)(mm)

     [2-100/0.1mmpezzi]

    Ripristina

  • W (Tip dimension)(mm)

     [2-30/0.01mmpezzi]

    Ripristina

  • WF (Flange position designation)(°)

    • 0
    • 90

     [0-360/90°pezzi]

    Ripristina

  • Tipo

    • HFCD
    • HFCE
    • HFCG
    • HFCR
    • HKCD
    • HKCE
    • HKCG
    • HKCR
    • HMCD
    • HMCE
    • HMCG
    • HMCR
    • HPCD
    • HPCE
    • HPCG
    • HPCR
    • HSFCD
    • HSFCE
    • HSFCG
    • HSFCR
    • HSKCD
    • HSKCE
    • HSKCG
    • HSKCR
    • HSMCD
    • HSMCE
    • HSMCG
    • HSMCR
    • HSPCD
    • HSPCE
    • HSPCG
    • HSPCR
    • HSWCD
    • HSWCE
    • HSWCG
    • HSWCR
    • HWCD
    • HWCE
    • HWCG
    • HWCR
    • PHFCD
    • PHFCE
    • PHFCG
    • PHFCR
    • PHKCD
    • PHKCE
    • PHKCG
    • PHKCR
    • PHMCD
    • PHMCE
    • PHMCG
    • PHMCR
    • PHPCD
    • PHPCE
    • PHPCG
    • PHPCR
    • PHWCD
    • PHWCE
    • PHWCG
    • PHWCR

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.