• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione
  • Lavori di manutenzione: questa pagina non sarà disponibile dalle ore 3:00 21/4/2024 alle ore 0:00 (CET) 22/4/2024 per lavori di manutenzione al server. Ci scusiamo per questo inconveniente.

Punzoni per il taglio delle forme / perno rompi-sfere (Codici componente - Download CAD)

Punzoni per il taglio delle forme / perno rompi-sfere

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

  • Punzoni per il taglio delle forme / perno rompi-sfere
  • Punzoni per il taglio delle forme / perno rompi-sfere
  • Punzoni per il taglio delle forme / perno rompi-sfere
  • Punzoni per il taglio delle forme / perno rompi-sfere
  • Punzoni per il taglio delle forme / perno rompi-sfere

MISUMI

MISUMI

  • SKH51
  • SKD11
  • POWDER HSS

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
  2. 2
  3. Avanti >>
Codice componente
HJFCD-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-F[0,​90]
HJFCD-LC[30-80/0.1]-P[5-30/0.01]-W[5-25/0.01]-F[0,​90]
HJFCE-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-F[0-270/90]
HJFCE-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-F[0-270/90]
HJFCG-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-F[0-270/90]
HJFCG-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-F[0-270/90]
HJFCR-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-R[0.15-12.5/0.01]-F[0,​90]
HJFCR-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-R[0.15-12.5/0.01]-F[0,​90]
HJKCD-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-K[0,​90]-T[20-70/0.1]
HJKCD-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-K[0,​90]-T[20-70/0.1]
HJKCE-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-K[0,​90]-T[20-70/0.1]
HJKCE-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-K[0,​90]-T[20-70/0.1]
HJKCG-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-K[0,​90]-T[20-70/0.1]
HJKCG-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-K[0,​90]-T[20-70/0.1]
HJKCR-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-R[0.15-12.5/0.01]-K[0,​90]-T[20-70/0.1]
HJKCR-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-R[0.15-12.5/0.01]-K[0,​90]-T[20-70/0.1]
HJMCD-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]
HJMCD-LC[30-80/0.1]-P[5-30/0.01]-W[5-25/0.01]
HJMCE-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]
HJMCE-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]
HJMCG-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]
HJMCG-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]
HJMCR-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-R[0.15-12.5/0.01]
HJMCR-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-R[0.15-12.5/0.01]
HJWCD-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-WF[0,​90]
HJWCD-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-WF[0,​90]
HJWCE-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-WF[0,​90]
HJWCE-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-WF[0,​90]
HJWCG-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-WF[0,​90]
HJWCG-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-WF[0,​90]
HJWCR-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-R[0.15-12.5/0.01]-WF[0,​90]
HJWCR-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-R[0.15-12.5/0.01]-WF[0,​90]
HSJFCD-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-F[0-360/90]
HSJFCD-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-F[0-360/90]
HSJFCE-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-F[0-270/90]
HSJFCE-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-F[0-270/90]
HSJFCG-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-F[0-270/90]
HSJFCG-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-F[0-270/90]
HSJFCR-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-R[0.15-12.5/0.01]-F[0-360/90]
HSJFCR-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-R[0.15-12.5/0.01]-F[0-360/90]
HSJKCD-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-K[0,​90]-T[20-70/0.1]
HSJKCD-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-K[0,​90]-T[20-70/0.1]
HSJKCE-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-K[0,​90]-T[20-70/0.1]
HSJKCE-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-K[0,​90]-T[20-70/0.1]
HSJKCG-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-K[0,​90]-T[20-70/0.1]
HSJKCG-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-K[0,​90]-T[20-70/0.1]
HSJKCR-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-R[0.15-12.5/0.01]-K[0,​90]-T[20-70/0.1]
HSJKCR-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-R[0.15-12.5/0.01]-K[0,​90]-T[20-70/0.1]
HSJMCD-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]
HSJMCD-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]
HSJMCE-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]
HSJMCE-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]
HSJMCG-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]
HSJMCG-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]
HSJMCR-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-R[0.15-12.5/0.01]
HSJMCR-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-R[0.15-12.5/0.01]
HSJWCD-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-WF[0-270/90]
HSJWCD-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-WF[0-270/90]
HSJWCE-[40-80/10]-P[5-30/0.01]-W[5-25/0.01]-WF[0,​90]
HSJWCE-LC[30-79.9/0.1]-P[5-30/0.01]-W[5-25/0.01]-WF[0,​90]
Codice componenteQuantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSTip shape Material Shank (mounting part) shape F (Flange position designation)
(°) 		K (Key groove position designation)
(°) 		L (L dimension)
(mm) 		LC (Full length alteration)
(mm) 		P (Tip dimension)
(mm) 		R (Tip corner R)
(mm) 		W (Tip dimension)
(mm) 		T (Key groove position)
(mm) 		WF (Flange position designation)
(°)
1 Preventivo 10DSKD11 EquivalentSingle-flanged--40 ～ 80-5 ～ 30-5 ～ 25--
1 Preventivo 10DSKD11 EquivalentSingle-flanged---30 ～ 805 ～ 30-5 ～ 25--
1 Preventivo 10ESKD11 EquivalentSingle-flanged0 ～ 270-40 ～ 80-5 ～ 30-5 ～ 25--
1 Preventivo 10ESKD11 EquivalentSingle-flanged0 ～ 270--30 ～ 79.95 ～ 30-5 ～ 25--
1 Preventivo 10GSKD11 EquivalentSingle-flanged0 ～ 270-40 ～ 80-5 ～ 30-5 ～ 25--
1 Preventivo 10GSKD11 EquivalentSingle-flanged0 ～ 270--30 ～ 79.95 ～ 30-5 ～ 25--
1 Preventivo 10RSKD11 EquivalentSingle-flanged0 ～ 90-40 ～ 80-5 ～ 300.15 ～ 12.55 ～ 25--
1 Preventivo 10RSKD11 EquivalentSingle-flanged0 ～ 90--30 ～ 79.95 ～ 300.15 ～ 12.55 ～ 25--
1 Preventivo 10DSKD11 EquivalentWith key groove-0 ～ 9040 ～ 80-5 ～ 30-5 ～ 2520 ～ 70-
1 Preventivo 10DSKD11 EquivalentWith key groove-0 ～ 90-30 ～ 79.95 ～ 30-5 ～ 2520 ～ 70-
1 Preventivo 10ESKD11 EquivalentWith key groove-0 ～ 9040 ～ 80-5 ～ 30-5 ～ 2520 ～ 70-
1 Preventivo 10ESKD11 EquivalentWith key groove-0 ～ 90-30 ～ 79.95 ～ 30-5 ～ 2520 ～ 70-
1 Preventivo 10GSKD11 EquivalentWith key groove-0 ～ 9040 ～ 80-5 ～ 30-5 ～ 2520 ～ 70-
1 Preventivo 10GSKD11 EquivalentWith key groove-0 ～ 90-30 ～ 79.95 ～ 30-5 ～ 2520 ～ 70-
1 Preventivo 10RSKD11 EquivalentWith key groove-0 ～ 9040 ～ 80-5 ～ 300.15 ～ 12.55 ～ 2520 ～ 70-
1 Preventivo 10RSKD11 EquivalentWith key groove-0 ～ 90-30 ～ 79.95 ～ 300.15 ～ 12.55 ～ 2520 ～ 70-
1 Preventivo 10DSKD11 EquivalentTapped--40 ～ 80-5 ～ 30-5 ～ 25--
1 Preventivo 10DSKD11 EquivalentTapped---30 ～ 805 ～ 30-5 ～ 25--
1 Preventivo 10ESKD11 EquivalentTapped--40 ～ 80-5 ～ 30-5 ～ 25--
1 Preventivo 10ESKD11 EquivalentTapped---30 ～ 79.95 ～ 30-5 ～ 25--
1 Preventivo 10GSKD11 EquivalentTapped--40 ～ 80-5 ～ 30-5 ～ 25--
1 Preventivo 10GSKD11 EquivalentTapped---30 ～ 79.95 ～ 30-5 ～ 25--
1 Preventivo 10RSKD11 EquivalentTapped--40 ～ 80-5 ～ 300.15 ～ 12.55 ～ 25--
1 Preventivo 10RSKD11 EquivalentTapped---30 ～ 79.95 ～ 300.15 ～ 12.55 ～ 25--
1 Preventivo 10DSKD11 EquivalentDouble-flanged--40 ～ 80-5 ～ 30-5 ～ 25-0 ～ 90
1 Preventivo 10DSKD11 EquivalentDouble-flanged---30 ～ 79.95 ～ 30-5 ～ 25-0 ～ 90
1 Preventivo 10ESKD11 EquivalentDouble-flanged--40 ～ 80-5 ～ 30-5 ～ 25-0 ～ 90
1 Preventivo 10ESKD11 EquivalentDouble-flanged---30 ～ 79.95 ～ 30-5 ～ 25-0 ～ 90
1 Preventivo 10GSKD11 EquivalentDouble-flanged--40 ～ 80-5 ～ 30-5 ～ 25-0 ～ 90
1 Preventivo 10GSKD11 EquivalentDouble-flanged---30 ～ 79.95 ～ 30-5 ～ 25-0 ～ 90
1 Preventivo 10RSKD11 EquivalentDouble-flanged--40 ～ 80-5 ～ 300.15 ～ 12.55 ～ 25-0 ～ 90
1 Preventivo 10RSKD11 EquivalentDouble-flanged---30 ～ 79.95 ～ 300.15 ～ 12.55 ～ 25-0 ～ 90
1 Preventivo 10DSKH51 EquivalentSingle-flanged0 ～ 360-40 ～ 80-5 ～ 30-5 ～ 25--
1 Preventivo 10DSKH51 EquivalentSingle-flanged0 ～ 360--30 ～ 79.95 ～ 30-5 ～ 25--
1 Preventivo 10ESKH51 EquivalentSingle-flanged0 ～ 270-40 ～ 80-5 ～ 30-5 ～ 25--
1 Preventivo 10ESKH51 EquivalentSingle-flanged0 ～ 270--30 ～ 79.95 ～ 30-5 ～ 25--
1 Preventivo 10GSKH51 EquivalentSingle-flanged0 ～ 270-40 ～ 80-5 ～ 30-5 ～ 25--
1 Preventivo 10GSKH51 EquivalentSingle-flanged0 ～ 270--30 ～ 79.95 ～ 30-5 ～ 25--
1 Preventivo 10RSKH51 EquivalentSingle-flanged0 ～ 360-40 ～ 80-5 ～ 300.15 ～ 12.55 ～ 25--
1 Preventivo 10RSKH51 EquivalentSingle-flanged0 ～ 360--30 ～ 79.95 ～ 300.15 ～ 12.55 ～ 25--
1 Preventivo 10DSKH51 EquivalentWith key groove-0 ～ 9040 ～ 80-5 ～ 30-5 ～ 2520 ～ 70-
1 Preventivo 10DSKH51 EquivalentWith key groove-0 ～ 90-30 ～ 79.95 ～ 30-5 ～ 2520 ～ 70-
1 Preventivo 10ESKH51 EquivalentWith key groove-0 ～ 9040 ～ 80-5 ～ 30-5 ～ 2520 ～ 70-
1 Preventivo 10ESKH51 EquivalentWith key groove-0 ～ 90-30 ～ 79.95 ～ 30-5 ～ 2520 ～ 70-
1 Preventivo 10GSKH51 EquivalentWith key groove-0 ～ 9040 ～ 80-5 ～ 30-5 ～ 2520 ～ 70-
1 Preventivo 10GSKH51 EquivalentWith key groove-0 ～ 90-30 ～ 79.95 ～ 30-5 ～ 2520 ～ 70-
1 Preventivo 10RSKH51 EquivalentWith key groove-0 ～ 9040 ～ 80-5 ～ 300.15 ～ 12.55 ～ 2520 ～ 70-
1 Preventivo 10RSKH51 EquivalentWith key groove-0 ～ 90-30 ～ 79.95 ～ 300.15 ～ 12.55 ～ 2520 ～ 70-
1 Preventivo 10DSKH51 EquivalentTapped--40 ～ 80-5 ～ 30-5 ～ 25--
1 Preventivo 10DSKH51 EquivalentTapped---30 ～ 79.95 ～ 30-5 ～ 25--
1 Preventivo 10ESKH51 EquivalentTapped--40 ～ 80-5 ～ 30-5 ～ 25--
1 Preventivo 10ESKH51 EquivalentTapped---30 ～ 79.95 ～ 30-5 ～ 25--
1 Preventivo 10GSKH51 EquivalentTapped--40 ～ 80-5 ～ 30-5 ～ 25--
1 Preventivo 10GSKH51 EquivalentTapped---30 ～ 79.95 ～ 30-5 ～ 25--
1 Preventivo 10RSKH51 EquivalentTapped--40 ～ 80-5 ～ 300.15 ～ 12.55 ～ 25--
1 Preventivo 10RSKH51 EquivalentTapped---30 ～ 79.95 ～ 300.15 ～ 12.55 ～ 25--
1 Preventivo 10DSKH51 EquivalentDouble-flanged--40 ～ 80-5 ～ 30-5 ～ 25-0 ～ 270
1 Preventivo 10DSKH51 EquivalentDouble-flanged---30 ～ 79.95 ～ 30-5 ～ 25-0 ～ 270
1 Preventivo 10ESKH51 EquivalentDouble-flanged--40 ～ 80-5 ～ 30-5 ～ 25-0 ～ 90
1 Preventivo 10ESKH51 EquivalentDouble-flanged---30 ～ 79.95 ～ 30-5 ～ 25-0 ～ 90

Loading...

  1. 1
  2. 2
  3. Avanti >>
 

Informazioni di base

Shank type Straight With/without jector With Surface treatment None

Configura

Ripristina

96Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Tip shape

    • D
    • R
    • E
    • G

    Ripristina

  • Material

    • SKD11 Equivalent
    • SKH51 Equivalent
    • Powdered high-speed steel

    Ripristina

  • Shank (mounting part) shape

    • Tapped
    • With key groove
    • Single-flanged
    • Double-flanged

    Ripristina

  • F (Flange position designation)(°)

    • 0
    • 90

     [0-360/90°pezzi]

    Ripristina

  • K (Key groove position designation)(°)

    • 0
    • 90

    Ripristina

  • L (L dimension)(mm)

     [40-80/10mmpezzi]

    Ripristina

  • LC (Full length alteration)(mm)

     [30-80/0.1mmpezzi]

    Ripristina

  • P (Tip dimension)(mm)

     [5-30/0.01mmpezzi]

    Ripristina

  • R (Tip corner R)(mm)

     [0.15-12.5/0.01mmpezzi]

    Ripristina

  • W (Tip dimension)(mm)

     [5-25/0.01mmpezzi]

    Ripristina

  • T (Key groove position)(mm)

     [20-70/0.1mmpezzi]

    Ripristina

  • WF (Flange position designation)(°)

    • 0
    • 90

     [0-360/90°pezzi]

    Ripristina

  • Tipo

    • HJFCD
    • HJFCE
    • HJFCG
    • HJFCR
    • HJKCD
    • HJKCE
    • HJKCG
    • HJKCR
    • HJMCD
    • HJMCE
    • HJMCG
    • HJMCR
    • HJWCD
    • HJWCE
    • HJWCG
    • HJWCR
    • HSJFCD
    • HSJFCE
    • HSJFCG
    • HSJFCR
    • HSJKCD
    • HSJKCE
    • HSJKCG
    • HSJKCR
    • HSJMCD
    • HSJMCE
    • HSJMCG
    • HSJMCR
    • HSJWCD
    • HSJWCE
    • HSJWCG
    • HSJWCR
    • PHJFCD
    • PHJFCE
    • PHJFCG
    • PHJFCR
    • PHJKCD
    • PHJKCE
    • PHJKCG
    • PHJKCR
    • PHJMCD
    • PHJMCE
    • PHJMCG
    • PHJMCR
    • PHJWCD
    • PHJWCE
    • PHJWCG
    • PHJWCR

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.