Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.
Codice componente
|
---|
ERVLFR1.5-[60-150/0.01]-P[0.6,0.7,0.8,1,1.2]-W[0.3,0.4,0.5,0.6]-R0.05-N[40,50,60,70,75,80,90] |
ERVLFR2-[60-150/0.01]-P[1,1.2,1.5,1.6,1.8]-W[0.3,0.4,0.5,0.6,0.7,0.8,1]-R0.05-N[40,50,60,70,80,90,100] |
ERVLFR2.5-[60-200/0.01]-P[1.5,1.6,2]-W[0.4,0.5,0.6,0.7,0.8,1,1.2]-R0.05-N[40,50,60,70,80,90,100] |
ERVLFR3-[60-200/0.01]-P[2,2.5]-W[0.4,0.5,0.6,0.7,0.8,1,1.2]-R0.05-N[40,50,60,70,80,90,100] |
ERVLFR3.5-[60-200/0.01]-P[2.5,3]-W[0.4,0.5,0.6,0.7,0.8,1,1.2,1.5,2]-R0.05-N[40,50,60,70,80,90,100] |
ERVLFR4-[60-200/0.01]-P[3,3.5]-W[0.4,0.5,0.6,0.7,0.8,1,1.2,1.5,2]-R0.05-N[40,50,60,70,80,90,100] |
ERVLFR4.5-[100-200/0.01]-P4-W[0.6,0.8,1,1.2,1.5]-R0.05-N[40,50,60,70,80,90,100] |
ERVLFR5-[100-200/0.01]-P4-W[0.8,1,2]-R0.05-N[50,60,70,80,90,100] |
ERVLFR5.5-[100-200/0.01]-P5-W[0.5,0.6,1]-R0.05-N[50,60,70,80,90,100] |
ERVLFR6-[100-200/0.01]-P5-W[0.8,1,1.5]-R0.05-N[50,60,70,75,80,90,100] |
ERVLWR1.5-[60-150/0.01]-P[0.6,0.7,0.8,1,1.2]-W[0.3,0.4,0.5,0.6]-R0.05-N[40,50,60,70,75,80,90] |
ERVLWR2-[60-150/0.01]-P[1,1.2,1.5,1.6,1.8]-W[0.3,0.4,0.5,0.6,0.7,0.8,1]-R0.05-N[40,50,60,70,80,90,100] |
ERVLWR2.5-[60-200/0.01]-P[1.5,1.6,2]-W[0.4,0.5,0.6,0.7,0.8,1,1.2]-R0.05-N[40,50,60,70,80,90,100] |
ERVLWR3-[60-200/0.01]-P[2,2.5]-W[0.4,0.5,0.6,0.7,0.8,1,1.2]-R0.05-N[40,50,60,70,80,90,100] |
ERVLWR3.5-[60-200/0.01]-P[2.5,3]-W[0.4,0.5,0.6,0.7,0.8,1,1.2,1.5,2]-R0.05-N[40,50,60,70,80,90,100] |
ERVLWR4-[60-200/0.01]-P[3,3.5]-W[0.4,0.5,0.6,0.7,0.8,1,1.2,1.5,2]-R0.05-N[40,50,60,70,80,90,100] |
ERVLWR4.5-[100-200/0.01]-P4-W[0.6,0.8,1,1.2,1.5]-R0.05-N[40,50,60,70,80,90,100] |
ERVLWR5-[100-200/0.01]-P4-W[0.8,1,2]-R0.05-N[50,60,70,80,90,100] |
ERVLWR5.5-[100-200/0.01]-P5-W[0.5,0.6,1]-R0.05-N[50,60,70,80,90,100] |
ERVLWR6-[100-200/0.01]-P5-W[0.8,1,1.5]-R0.05-N[50,60,70,75,80,90,100] |
Codice componente | Quantità minima d'ordine | Sconto volumi elevati | RoHS | P (Punta) (mm) | W (Punta) (mm) | D (Diametro dell'albero) (mm) | Posizione rettangolare Smussatura-R | L (dimensione L) (mm) | N (mm) | R (Corner R of the tip corner) (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|
1 | Preventivo | 10 | 0.6 ~ 1 | 0.3 ~ 0.6 | 1.5 | FR | 60 ~ 150 | 40 ~ 80 | 0.05 | ||
1 | Preventivo | 10 | 1 ~ 1.5 | 0.3 ~ 1 | 2 | FR | 60 ~ 150 | 40 ~ 100 | 0.05 | ||
1 | Preventivo | 10 | 1.5 ~ 2 | 0.4 ~ 1.2 | 2.5 | FR | 60 ~ 200 | 40 ~ 100 | 0.05 | ||
1 | Preventivo | 10 | 2 ~ 2.5 | 0.4 ~ 1.2 | 3 | FR | 60 ~ 200 | 40 ~ 100 | 0.05 | ||
1 | Preventivo | 10 | 2.5 ~ 3 | 0.4 ~ 2 | 3.5 | FR | 60 ~ 200 | 40 ~ 100 | 0.05 | ||
1 | Preventivo | 10 | 3 | 0.4 ~ 2 | 4 | FR | 60 ~ 200 | 40 ~ 100 | 0.05 | ||
1 | Preventivo | 10 | 4 | 0.6 ~ 1.5 | 4.5 | FR | 100 ~ 200 | 40 ~ 100 | 0.05 | ||
1 | Preventivo | 10 | 4 | 0.8 ~ 2 | 5 | FR | 100 ~ 200 | 50 ~ 100 | 0.05 | ||
1 | Preventivo | 10 | 5 | 0.5 ~ 1 | 5.5 | FR | 100 ~ 200 | 50 ~ 100 | 0.05 | ||
1 | Preventivo | 10 | 5 | 0.8 ~ 1.5 | 6 | FR | 100 ~ 200 | 50 ~ 100 | 0.05 | ||
1 | Preventivo | 10 | 0.6 ~ 1 | 0.3 ~ 0.6 | 1.5 | WR | 60 ~ 150 | 40 ~ 80 | 0.05 | ||
1 | Preventivo | 10 | 1 ~ 1.5 | 0.3 ~ 1 | 2 | WR | 60 ~ 150 | 40 ~ 100 | 0.05 | ||
1 | Preventivo | 10 | 1.5 ~ 2 | 0.4 ~ 1.2 | 2.5 | WR | 60 ~ 200 | 40 ~ 100 | 0.05 | ||
1 | Preventivo | 10 | 2 ~ 2.5 | 0.4 ~ 1.2 | 3 | WR | 60 ~ 200 | 40 ~ 100 | 0.05 | ||
1 | Preventivo | 10 | 2.5 ~ 3 | 0.4 ~ 2 | 3.5 | WR | 60 ~ 200 | 40 ~ 100 | 0.05 | ||
1 | Preventivo | 10 | 3 | 0.4 ~ 2 | 4 | WR | 60 ~ 200 | 40 ~ 100 | 0.05 | ||
1 | Preventivo | 10 | 4 | 0.6 ~ 1.5 | 4.5 | WR | 100 ~ 200 | 40 ~ 100 | 0.05 | ||
1 | Preventivo | 10 | 4 | 0.8 ~ 2 | 5 | WR | 100 ~ 200 | 50 ~ 100 | 0.05 | ||
1 | Preventivo | 10 | 5 | 0.5 ~ 1 | 5.5 | WR | 100 ~ 200 | 50 ~ 100 | 0.05 | ||
1 | Preventivo | 10 | 5 | 0.8 ~ 1.5 | 6 | WR | 100 ~ 200 | 50 ~ 100 | 0.05 |
Loading...
Materiale | SKH51 | Tolleranza di dimensione P/W (tolleranza di riferimento) | 0/-0.005 | Trattamento della superficie | No |
---|---|---|---|---|---|
Spessore della testa | 4mm(T4) | Trattamento rettangolare | R-Chamfered rectangular | Forma della punta | No |
Tipo di incisione dei caratteri | No | Numero di caratteri di incisione | No | Posizione smusso-C | No |
Con/senza forma di rilascio del gas | No | Tipo di forma | Normale | Rifinitura | Normale |
Standard tecnico | JIS |
Configura
Proprietà di base
P (Punta)(mm)
W (Punta)(mm)
D (Diametro dell'albero)(mm)
Posizione rettangolare Smussatura-R
L (dimensione L)(mm)
N(mm)
R (Corner R of the tip corner)(mm)
Tipo
Filtrare per tipo dati CAD
Attributi opzionali