• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Perni centrali / forma della testa selezionabile / HSS / estremità lavorata / diametro del gambo configurabile

Perni centrali / forma della testa selezionabile / HSS / estremità lavorata / diametro del gambo configurabile

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

MISUMI

MISUMI

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
CPHG-5LC1-[50-200/0.01]-P[0.8-0.99/0.01]-C[0.1-0.4/0.1]
CPHG-5LC1.5-[50-250/0.01]-P[1-1.49/0.01]-C[0.1-0.6/0.1]
CPHG-5LC2-[50-250/0.01]-P[1.5-1.99/0.01]-C[0.1-0.9/0.1]
CPHG-5LC2.5-[50-250/0.01]-P[2-2.49/0.01]-C[0.1-1.1/0.1]
CPHG-5LC3-[50-300/0.01]-P[2.5-2.99/0.01]-C[0.1-1.4/0.1]
CPHG-5LC3.5-[50-300/0.01]-P[3-3.49/0.01]-C[0.1-1.6/0.1]
CPHG-5LC4-[50-300/0.01]-P[3.5-3.99/0.01]-C[0.1-1.9/0.1]
CPHG-5LC4.5-[50-300/0.01]-P[4-4.49/0.01]-C[0.1-2.1/0.1]
CPHG-5LC5-[50-350/0.01]-P[4.5-4.99/0.01]-C[0.1-2.4/0.1]
CPHG-5LC5.5-[50-350/0.01]-P[5-5.49/0.01]-C[0.1-2.6/0.1]
CPHG-5LC6-[50-350/0.01]-P[5.5-5.99/0.01]-C[0.1-2.9/0.1]
CPHG-5LC6.5-[50-350/0.01]-P[6-6.49/0.01]-C[0.1-3.1/0.1]
CPHG-5LC7-[50-350/0.01]-P[6.5-6.99/0.01]-C[0.1-3.4/0.1]
CPHG-5LC8-[50-350/0.01]-P[7-7.99/0.01]-C[0.1-3.9/0.1]
CPHG-5LC10-[50-350/0.01]-P[8-9.99/0.01]-C[0.1-4.9/0.1]
CPHG-5LC12-[50-350/0.01]-P[10-11.99/0.01]-C[0.1-5.9/0.1]
CPHGE-5LC1-[50-200/0.01]-P[0.8-0.99/0.01]-C[0.1-0.4/0.1]
CPHGE-5LC1.5-[50-250/0.01]-P[1-1.9/0.01]-C[0.1-0.6/0.1]
CPHGE-5LC2-[50-250/0.01]-P[1.5-1.99/0.01]-C[0.1-0.9/0.1]
CPHGE-5LC2.5-[50-250/0.01]-P[2-2.49/0.01]-C[0.1-1.1/0.1]
CPHGE-5LC3-[50-300/0.01]-P[2.5-2.99/0.01]-C[0.1-1.4/0.1]
CPHGE-5LC3.5-[50-300/0.01]-P[3-3.49/0.01]-C[0.1-1.6/0.1]
CPHGE-5LC4-[50-300/0.01]-P[3.5-3.99/0.01]-C[0.1-1.9/0.1]
CPHGE-5LC4.5-[50-300/0.01]-P[4-4.49/0.01]-C[0.1-2.1/0.1]
CPHGE-5LC5-[50-350/0.01]-P[4.5-4.99/0.01]-C[0.1-2.4/0.1]
CPHGE-5LC5.5-[50-350/0.01]-P[5-5.49/0.01]-C[0.1-2.6/0.1]
CPHGE-5LC6-[50-350/0.01]-P[5.5-5.99/0.01]-C[0.1-2.9/0.1]
CPHGE-5LC6.5-[50-350/0.01]-P[6-6.49/0.01]-C[0.1-3.1/0.1]
CPHGE-5LC7-[50-350/0.01]-P[6.5-6.99/0.01]-C[0.1-3.4/0.1]
CPHGE-5LC8-[50-350/0.01]-P[7-7.99/0.01]-C[0.1-3.9/0.1]
CPHGE-5LC10-[50-350/0.01]-P[8-9.99/0.01]-C[0.1-4.9/0.1]
CPHGE-5LC12-[50-350/0.01]-P[10-11.99/0.01]-C[0.1-5.9/0.1]
CPHJG-5LC4-[50-300/0.01]-P[3.5-3.99/0.01]-C[0.1-1.9/0.1]
CPHJG-5LC4.5-[50-300/0.01]-P[4-4.49/0.01]-C[0.1-2.1/0.1]
CPHJG-5LC5-[50-350/0.01]-P[4.5-4.99/0.01]-C[0.1-2.4/0.1]
CPHJG-5LC5.5-[50-350/0.01]-P[5-5.49/0.01]-C[0.1-2.6/0.1]
CPHJG-5LC6-[50-350/0.01]-P[5.5-5.99/0.01]-C[0.1-2.9/0.1]
CPHJG-5LC6.5-[50-350/0.01]-P[6-6.49/0.01]-C[0.1-3.1/0.1]
CPHJG-5LC7-[50-350/0.01]-P[6.5-6.99/0.01]-C[0.1-3.4/0.1]
CPHJG-5LC10-[50-350/0.01]-P[8-9.99/0.01]-C[0.1-4.9/0.1]
CPHJG-5LC12-[50-350/0.01]-P[10-11.99/0.01]-C[0.1-5.9/0.1]
CPHJGE-5LC4-[50-300/0.01]-P[3.5-3.99/0.01]-C[0.1-1.9/0.1]
CPHJGE-5LC4.5-[50-300/0.01]-P[4-4.49/0.01]-C[0.1-2.1/0.1]
CPHJGE-5LC5-[50-350/0.01]-P[4.5-4.99/0.01]-C[0.1-2.4/0.1]
CPHJGE-5LC5.5-[50-350/0.01]-P[5-5.49/0.01]-C[0.1-2.6/0.1]
CPHJGE-5LC6-[50-350/0.01]-P[5.5-5.99/0.01]-C[0.1-2.9/0.1]
CPHJGE-5LC6.5-[50-350/0.01]-P[6-6.49/0.01]-C[0.1-3.1/0.1]
CPHJGE-5LC7-[50-350/0.01]-P[6.5-6.99/0.01]-C[0.1-3.4/0.1]
CPHJGE-5LC10-[50-350/0.01]-P[8-9.99/0.01]-C[0.1-4.9/0.1]
CPHJGE-5LC12-[50-350/0.01]-P[10-11.99/0.01]-C[0.1-5.9/0.1]
Codice componenteQuantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSHead thickness Shaft diameter tolerance D/P (Shaft diameter)
(mm) 		Tip shape Applicable ejector sleeves inner diameter tolerance No. (Nominal diameter)
(mm) 		C (C chamfering width on the tip)
(mm) 		K (Taper angle)
(°) 		L (L dimension)
(mm) 		R (Tip R chamfering)
(mm) 		S (Tip tapered width)
(mm)
1 Preventivo 104mm(T4)0/-0.0050.8 ～ 0.99C-10.1 ～ 0.4-50 ～ 200--
1 Preventivo 104mm(T4)0/-0.0051 ～ 1.49C-1.50.1 ～ 0.6-50 ～ 250--
1 Preventivo 104mm(T4)0/-0.0051.5 ～ 1.99C-20.1 ～ 0.9-50 ～ 250--
1 Preventivo 104mm(T4)0/-0.0052 ～ 2.49C-2.50.1 ～ 1.1-50 ～ 250--
1 Preventivo 104mm(T4)0/-0.0052.5 ～ 2.99C-30.1 ～ 1.4-50 ～ 300--
1 Preventivo 104mm(T4)0/-0.0053 ～ 3.49C-3.50.1 ～ 1.6-50 ～ 300--
1 Preventivo 104mm(T4)0/-0.0053.5 ～ 3.99C-40.1 ～ 1.9-50 ～ 300--
1 Preventivo 104mm(T4)0/-0.0054 ～ 4.49C-4.50.1 ～ 2.1-50 ～ 300--
1 Preventivo 104mm(T4)0/-0.0054.5 ～ 4.99C-50.1 ～ 2.4-50 ～ 350--
1 Preventivo 104mm(T4)0/-0.0055 ～ 5.49C-5.50.1 ～ 2.6-50 ～ 350--
1 Preventivo 104mm(T4)0/-0.0055.5 ～ 5.99C-60.1 ～ 2.9-50 ～ 350--
1 Preventivo 104mm(T4)0/-0.0056 ～ 6.49C-6.50.1 ～ 3.1-50 ～ 350--
1 Preventivo 104mm(T4)0/-0.0056.5 ～ 6.99C-70.1 ～ 3.4-50 ～ 350--
1 Preventivo 104mm(T4)0/-0.0057 ～ 7.99C-80.1 ～ 3.9-50 ～ 350--
1 Preventivo 104mm(T4)0/-0.0058 ～ 9.99C-100.1 ～ 4.9-50 ～ 350--
1 Preventivo 104mm(T4)0/-0.00510 ～ 11.99C-120.1 ～ 5.9-50 ～ 350--
1 Preventivo 104mm(T4)-0.01/-0.020.8 ～ 0.99C+0.01/0 or H710.1 ～ 0.4-50 ～ 200--
1 Preventivo 104mm(T4)-0.01/-0.021 ～ 1.9C+0.01/0 or H71.50.1 ～ 0.6-50 ～ 250--
1 Preventivo 104mm(T4)-0.01/-0.021.5 ～ 1.99C+0.01/0 or H720.1 ～ 0.9-50 ～ 250--
1 Preventivo 104mm(T4)-0.01/-0.022 ～ 2.49C+0.01/0 or H72.50.1 ～ 1.1-50 ～ 250--
1 Preventivo 104mm(T4)-0.01/-0.022.5 ～ 2.99C+0.01/0 or H730.1 ～ 1.4-50 ～ 300--
1 Preventivo 104mm(T4)-0.01/-0.023 ～ 3.49C+0.01/0 or H73.50.1 ～ 1.6-50 ～ 300--
1 Preventivo 104mm(T4)-0.01/-0.023.5 ～ 3.99C+0.01/0 or H740.1 ～ 1.9-50 ～ 300--
1 Preventivo 104mm(T4)-0.01/-0.024 ～ 4.49C+0.01/0 or H74.50.1 ～ 2.1-50 ～ 300--
1 Preventivo 104mm(T4)-0.01/-0.024.5 ～ 4.99C+0.01/0 or H750.1 ～ 2.4-50 ～ 350--
1 Preventivo 104mm(T4)-0.01/-0.025 ～ 5.49C+0.01/0 or H75.50.1 ～ 2.6-50 ～ 350--
1 Preventivo 104mm(T4)-0.01/-0.025.5 ～ 5.99C+0.01/0 or H760.1 ～ 2.9-50 ～ 350--
1 Preventivo 104mm(T4)-0.01/-0.026 ～ 6.49C+0.01/0 or H76.50.1 ～ 3.1-50 ～ 350--
1 Preventivo 104mm(T4)-0.01/-0.026.5 ～ 6.99C+0.01/0 or H770.1 ～ 3.4-50 ～ 350--
1 Preventivo 104mm(T4)-0.01/-0.027 ～ 7.99C+0.01/0 or H780.1 ～ 3.9-50 ～ 350--
1 Preventivo 104mm(T4)-0.01/-0.028 ～ 9.99C+0.01/0 or H7100.1 ～ 4.9-50 ～ 350--
1 Preventivo 104mm(T4)-0.01/-0.0210 ～ 11.99C+0.01/0 or H7120.1 ～ 5.9-50 ～ 350--
1 Preventivo 106mm(JIS)0/-0.0053.5 ～ 3.99C-40.1 ～ 1.9-50 ～ 300--
1 Preventivo 106mm(JIS)0/-0.0054 ～ 4.49C-4.50.1 ～ 2.1-50 ～ 300--
1 Preventivo 106mm(JIS)0/-0.0054.5 ～ 4.99C-50.1 ～ 2.4-50 ～ 350--
1 Preventivo 106mm(JIS)0/-0.0055 ～ 5.49C-5.50.1 ～ 2.6-50 ～ 350--
1 Preventivo 106mm(JIS)0/-0.0055.5 ～ 5.99C-60.1 ～ 2.9-50 ～ 350--
1 Preventivo 106mm(JIS)0/-0.0056 ～ 6.49C-6.50.1 ～ 3.1-50 ～ 350--
1 Preventivo 106mm(JIS)0/-0.0056.5 ～ 6.99C-70.1 ～ 3.4-50 ～ 350--
1 Preventivo 108mm(JIS)0/-0.0058 ～ 9.99C-100.1 ～ 4.9-50 ～ 350--
1 Preventivo 108mm(JIS)0/-0.00510 ～ 11.99C-120.1 ～ 5.9-50 ～ 350--
1 Preventivo 106mm(JIS)-0.01/-0.023.5 ～ 3.99C+0.01/0 or H740.1 ～ 1.9-50 ～ 300--
1 Preventivo 106mm(JIS)-0.01/-0.024 ～ 4.49C+0.01/0 or H74.50.1 ～ 2.1-50 ～ 300--
1 Preventivo 106mm(JIS)-0.01/-0.024.5 ～ 4.99C+0.01/0 or H750.1 ～ 2.4-50 ～ 350--
1 Preventivo 106mm(JIS)-0.01/-0.025 ～ 5.49C+0.01/0 or H75.50.1 ～ 2.6-50 ～ 350--
1 Preventivo 106mm(JIS)-0.01/-0.025.5 ～ 5.99C+0.01/0 or H760.1 ～ 2.9-50 ～ 350--
1 Preventivo 106mm(JIS)-0.01/-0.026 ～ 6.49C+0.01/0 or H76.50.1 ～ 3.1-50 ～ 350--
1 Preventivo 106mm(JIS)-0.01/-0.026.5 ～ 6.99C+0.01/0 or H770.1 ～ 3.4-50 ～ 350--
1 Preventivo 108mm(JIS)-0.01/-0.028 ～ 9.99C+0.01/0 or H7100.1 ～ 4.9-50 ～ 350--
1 Preventivo 108mm(JIS)-0.01/-0.0210 ～ 11.99C+0.01/0 or H7120.1 ～ 5.9-50 ～ 350--

Loading...

  1. 1
 

Informazioni di base

Material SKH51 Surface treatment No With/without cooling hole No

Configura

Ripristina

50Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Head thickness

    • 4mm(T4)
    • 6mm(JIS)
    • 8mm(JIS)

    Ripristina

  • Shaft diameter tolerance

    • 0/-0.005
    • -0.01/-0.02

    Ripristina

  • D/P (Shaft diameter)(mm)

     [0.8-11.99/0.01mmpezzi]

    Ripristina

  • Applicable ejector sleeves inner diameter tolerance

    • +0.01/0 or H7

    Ripristina

  • No. (Nominal diameter)(mm)

    • 1
    • 1.5
    • 2
    • 2.5
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 6.5
    • 7
    • 8
    • 10
    • 12

    Ripristina

  • C (C chamfering width on the tip)(mm)

     [0.1-5.9/0.1mmpezzi]

    Ripristina

  • K (Taper angle)(°)

     

    Ripristina

  • L (L dimension)(mm)

     [50-350/0.01mmpezzi]

    Ripristina

  • R (Tip R chamfering)(mm)

     

    Ripristina

  • S (Tip tapered width)(mm)

     

    Ripristina

  • Tipo

    • CPHG-5LB
    • CPHG-5LC
    • CPHG-5LG
    • CPHG-5LR
    • CPHG-5LT
    • CPHGE-5LB
    • CPHGE-5LC
    • CPHGE-5LG
    • CPHGE-5LR
    • CPHGE-5LT
    • CPHJG-5LB
    • CPHJG-5LC
    • CPHJG-5LG
    • CPHJG-5LR
    • CPHJG-5LT
    • CPHJGE-5LB
    • CPHJGE-5LC
    • CPHJGE-5LG
    • CPHJGE-5LR
    • CPHJGE-5LT

    Ripristina

  • Tip shape

    • C
    • G
    • T
    • R
    • B

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.