Perni centrali / forma della testa selezionabile / acciaio per utensili / nitrurato / a gradini / punta conica / faccia terminale lavorata (Codici componente - Download CAD)
Fare clic sull'immagine per ingrandirla.
Cliccare sull´immagine per ingrandirla.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
- Disegno
- Anteprima 3D L'anteprima 3D è disponibile dopo la configurazione completa
- Codici componente
- Catalogo
Codice componente:
- Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | RoHS | Shaft diameter tolerance | D/P (Shaft diameter) (mm) | Step (Step shape) | Shape (Tip shape) | Applicable sleeve hole diameter tolerance | A/V (Tip tolerance) | A (Tip part) (mm) | C (Tip part) (mm) | F (Shaft diameter length) (mm) | G (Tip C chamfering width on the tip part) (mm) | K (Tip part angle) (°) | L (L dimension) (mm) | Q (Tip R chamfering on the tip part) (mm) | R (Tip part) (mm) | S (Tip tapered width on the tip part) (mm) | V (Tip diameter in the tip part) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | Preventivo | 10 | -0.01/-0.02 | 1.5 | A | No processing | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 199.5 | - | - | 70 ～ 200 | - | - | - | 0.5 ～ 1.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 2 | A | No processing | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 249.5 | - | - | 70 ～ 250 | - | - | - | 0.7 ～ 1.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 2.5 | A | No processing | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 249.5 | - | - | 70 ～ 250 | - | - | - | 0.7 ～ 2.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 3 | A | No processing | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 299.5 | - | - | 70 ～ 300 | - | - | - | 1 ～ 2.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 3.5 | A | No processing | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 299.5 | - | - | 70 ～ 300 | - | - | - | 1 ～ 3.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 4 | A | No processing | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 299.5 | - | - | 70 ～ 300 | - | - | - | 1 ～ 3.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 4.5 | A | No processing | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 299.5 | - | - | 70 ～ 300 | - | - | - | 1.5 ～ 4.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 5 | A | No processing | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | - | 70 ～ 500 | - | - | - | 1.5 ～ 4.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 5.5 | A | No processing | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | - | 70 ～ 500 | - | - | - | 2 ～ 5.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 6 | A | No processing | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | - | 70 ～ 500 | - | - | - | 2 ～ 5.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 6.5 | A | No processing | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | - | 70 ～ 500 | - | - | - | 2 ～ 6.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 7 | A | No processing | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | - | 70 ～ 500 | - | - | - | 2 ～ 6.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 8 | A | No processing | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | - | 70 ～ 500 | - | - | - | 2 ～ 7.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 10 | A | No processing | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | - | 70 ～ 500 | - | - | - | 2 ～ 9.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 12 | A | No processing | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | - | 70 ～ 500 | - | - | - | 2 ～ 11.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 1.5 | A | B | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 199.5 | - | - | 70 ～ 200 | - | - | - | 0.5 ～ 1.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 2 | A | B | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 249.5 | - | - | 70 ～ 250 | - | - | - | 0.7 ～ 1.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 2.5 | A | B | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 249.5 | - | - | 70 ～ 250 | - | - | - | 0.7 ～ 2.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 3 | A | B | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 299.5 | - | - | 70 ～ 300 | - | - | - | 1 ～ 2.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 3.5 | A | B | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 299.5 | - | - | 70 ～ 300 | - | - | - | 1 ～ 3.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 4 | A | B | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 299.5 | - | - | 70 ～ 300 | - | - | - | 1 ～ 3.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 4.5 | A | B | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 299.5 | - | - | 70 ～ 300 | - | - | - | 1.5 ～ 4.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 5 | A | B | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | - | 70 ～ 500 | - | - | - | 1.5 ～ 4.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 5.5 | A | B | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | - | 70 ～ 500 | - | - | - | 1.5 ～ 5.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 6 | A | B | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | - | 70 ～ 500 | - | - | - | 2 ～ 5.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 6.5 | A | B | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | - | 70 ～ 500 | - | - | - | 2 ～ 6.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 7 | A | B | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | - | 70 ～ 500 | - | - | - | 2 ～ 6.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 8 | A | B | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | - | 70 ～ 500 | - | - | - | 2 ～ 7.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 10 | A | B | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | - | 70 ～ 500 | - | - | - | 2 ～ 9.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 12 | A | B | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | - | 70 ～ 500 | - | - | - | 2 ～ 11.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 1.5 | A | C | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 199.5 | 0.5 ～ 0.7 | - | 70 ～ 200 | - | - | - | 0.5 ～ 1.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 2 | A | C | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 249.5 | 0.5 ～ 0.9 | - | 70 ～ 250 | - | - | - | 0.7 ～ 1.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 2.5 | A | C | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 249.5 | 0.5 ～ 1.2 | - | 70 ～ 250 | - | - | - | 0.7 ～ 2.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 3 | A | C | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 299.5 | 0.5 ～ 1.4 | - | 70 ～ 300 | - | - | - | 1 ～ 2.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 3.5 | A | C | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 299.5 | 0.5 ～ 1.7 | - | 70 ～ 300 | - | - | - | 1 ～ 3.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 4 | A | C | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 299.5 | 0.5 ～ 1.9 | - | 70 ～ 300 | - | - | - | 1 ～ 3.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 4.5 | A | C | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 299.5 | 0.5 ～ 2.2 | - | 70 ～ 300 | - | - | - | 1.5 ～ 4.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 5 | A | C | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | 0.5 ～ 2.4 | - | 70 ～ 500 | - | - | - | 1.5 ～ 4.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 5.5 | A | C | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | 0.5 ～ 2.7 | - | 70 ～ 500 | - | - | - | 1.5 ～ 5.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 6 | A | C | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | 0.5 ～ 2.9 | - | 70 ～ 500 | - | - | - | 2 ～ 5.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 6.5 | A | C | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | 0.5 ～ 3.2 | - | 70 ～ 500 | - | - | - | 2 ～ 6.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 7 | A | C | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | 0.5 ～ 3.4 | - | 70 ～ 500 | - | - | - | 2 ～ 6.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 8 | A | C | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | 0.5 ～ 3.9 | - | 70 ～ 500 | - | - | - | 2 ～ 7.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 10 | A | C | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | 0.5 ～ 4.9 | - | 70 ～ 500 | - | - | - | 2 ～ 9.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 12 | A | C | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | 0.5 ～ 6.4 | - | 70 ～ 500 | - | - | - | 2 ～ 11.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 1.5 | A | G | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 199.5 | - | 21 ～ 60 | 70 ～ 200 | - | - | - | 0.5 ～ 1.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 2 | A | G | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 249.5 | - | 21 ～ 60 | 70 ～ 250 | - | - | - | 0.7 ～ 1.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 2.5 | A | G | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 249.5 | - | 21 ～ 60 | 70 ～ 250 | - | - | - | 0.7 ～ 2.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 3 | A | G | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 299.5 | - | 21 ～ 60 | 70 ～ 300 | - | - | - | 1 ～ 2.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 3.5 | A | G | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 299.5 | - | 21 ～ 60 | 70 ～ 300 | - | - | - | 1 ～ 3.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 4 | A | G | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 299.5 | - | 21 ～ 60 | 70 ～ 300 | - | - | - | 1 ～ 3.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 4.5 | A | G | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 299.5 | - | 21 ～ 60 | 70 ～ 300 | - | - | - | 1.5 ～ 4.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 5 | A | G | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | 21 ～ 60 | 70 ～ 500 | - | - | - | 1.5 ～ 4.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 5.5 | A | G | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | 21 ～ 60 | 70 ～ 500 | - | - | - | 1.5 ～ 5.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 6 | A | G | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | 21 ～ 60 | 70 ～ 500 | - | - | - | 2 ～ 5.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 6.5 | A | G | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | 21 ～ 60 | 70 ～ 500 | - | - | - | 2 ～ 6.49 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 7 | A | G | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | 21 ～ 60 | 70 ～ 500 | - | - | - | 2 ～ 6.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 8 | A | G | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | 21 ～ 60 | 70 ～ 500 | - | - | - | 2 ～ 7.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 10 | A | G | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | 21 ～ 60 | 70 ～ 500 | - | - | - | 2 ～ 9.99 | ||
- | 1 | Preventivo | 10 | -0.01/-0.02 | 12 | A | G | +0.01/0 or H7 | ±0.02 | - | - | 50 ～ 499.5 | - | 21 ～ 60 | 70 ～ 500 | - | - | - | 2 ～ 11.99 |
Loading...
Informazioni di base
| Material | SKD61 | Surface treatment | No | Head thickness | 4mm(T4) |
|---|---|---|---|---|---|
| Shape | One-step | With/without cooling hole | No |
Configura
Proprietà di base
-
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
-
D/P (Shaft diameter)(mm)
-
Step (Step shape)
- A
- B
- C
- D
- E
-
Shape (Tip shape)
- No processing
- C
- G
- T
- R
- B
-
Applicable sleeve hole diameter tolerance
- +0.005/0
- +0.01/0 or H7
-
A/V (Tip tolerance)
- ±0.01
- ±0.02
-
A (Tip part)(mm)
-
C (Tip part)(mm)
-
F (Shaft diameter length)(mm)
-
G (Tip C chamfering width on the tip part)(mm)
-
K (Tip part angle)(°)
-
L (L dimension)(mm)
-
Q (Tip R chamfering on the tip part)(mm)
-
R (Tip part)(mm)
-
S (Tip tapered width on the tip part)(mm)
-
V (Tip diameter in the tip part)(mm)
-
Tipo
- CPD-5A
- CPD-5AB
- CPD-5AC
- CPD-5AG
- CPD-5AR
- CPD-5AT
- CPD-5B
- CPD-5BB
- CPD-5BC
- CPD-5BG
- CPD-5BR
- CPD-5BT
- CPD-5C
- CPD-5CB
- CPD-5CC
- CPD-5CG
- CPD-5CR
- CPD-5CT
- CPD-5D
- CPD-5DB
- CPD-5DC
- CPD-5DG
- CPD-5DR
- CPD-5DT
- CPD-5E
- CPD-5EB
- CPD-5EC
- CPD-5EG
- CPD-5ER
- CPD-5ET
- CPDK-5A
- CPDK-5AB
- CPDK-5AC
- CPDK-5AG
- CPDK-5AR
- CPDK-5AT
- CPDK-5B
- CPDK-5BB
- CPDK-5BC
- CPDK-5BG
- CPDK-5BR
- CPDK-5BT
- CPDK-5C
- CPDK-5CB
- CPDK-5CC
- CPDK-5CG
- CPDK-5CR
- CPDK-5CT
- CPDK-5D
- CPDK-5DB
- CPDK-5DC
- CPDK-5DG
- CPDK-5DR
- CPDK-5DT
- CPDK-5E
- CPDK-5EB
- CPDK-5EC
- CPDK-5EG
- CPDK-5ER
- CPDK-5ET
- CPP-5A
- CPP-5AB
- CPP-5AC
- CPP-5AG
- CPP-5AR
- CPP-5AT
- CPP-5B
- CPP-5BB
- CPP-5BC
- CPP-5BG
- CPP-5BR
- CPP-5BT
- CPP-5C
- CPP-5CB
- CPP-5CC
- CPP-5CG
- CPP-5CR
- CPP-5CT
- CPP-5D
- CPP-5DB
- CPP-5DC
- CPP-5DG
- CPP-5DR
- CPP-5DT
- CPP-5E
- CPP-5EB
- CPP-5EC
- CPP-5EG
- CPP-5ER
- CPP-5ET
-
Filtrare per tipo dati CAD
- 2D
- 3D
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.