• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Perni centrali / cilindrici / con testa / HSS, acciaio per utensili / d, L 0,01 mm / forma della faccia selezionabile (Codici componente - Download CAD)

Perni centrali / cilindrici / con testa / HSS, acciaio per utensili / d, L 0,01 mm / forma della faccia selezionabile

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

  • Variazione

MISUMI

MISUMI

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. << Indietro
  2. 3
  3. 4
  4. 5
  5. 6
  6. 7
  7. Avanti >>
Codice componente
F-CPFER9-[10-100/0.01]-P[4-7/0.01]-T[1.5-20/0.1]-RTC[0.2-3.4/0.1]
F-CPFER10-[10-100/0.01]-P[5-8/0.01]-T[1.5-20/0.1]-Q[0.2-3.9/0.1]
F-CPFER10-[10-100/0.01]-P[5-8/0.01]-T[1.5-20/0.1]-R[0.2-3.9/0.1]
F-CPFER10-[10-100/0.01]-P[5-8/0.01]-T[1.5-20/0.1]-RTC[0.2-3.9/0.1]
F-CPFER11-[10-100/0.01]-P[6-9/0.01]-T[1.5-20/0.1]-Q[0.2-4.4/0.1]
F-CPFER11-[10-100/0.01]-P[6-9/0.01]-T[1.5-20/0.1]-R[0.2-4.4/0.1]
F-CPFER11-[10-100/0.01]-P[6-9/0.01]-T[1.5-20/0.1]-RTC[0.2-4.4/0.1]
F-CPFER12-[10-100/0.01]-P[7-10/0.01]-T[1.5-20/0.1]-Q[0.2-4.9/0.1]
F-CPFER12-[10-100/0.01]-P[7-10/0.01]-T[1.5-20/0.1]-R[0.2-4.9/0.1]
F-CPFER12-[10-100/0.01]-P[7-10/0.01]-T[1.5-20/0.1]-RTC[0.2-4.9/0.1]
F-CPFER13-[10-100/0.01]-P[8-11/0.01]-T[1.5-20/0.1]-Q[0.2-5.4/0.1]
F-CPFER13-[10-100/0.01]-P[8-11/0.01]-T[1.5-20/0.1]-R[0.2-5.4/0.1]
F-CPFER13-[10-100/0.01]-P[8-11/0.01]-T[1.5-20/0.1]-RTC[0.2-5.4/0.1]
F-CPFER15-[10-100/0.01]-P[10-13/0.01]-T[1.5-20/0.1]-Q[0.2-6.4/0.1]
F-CPFER15-[10-100/0.01]-P[10-13/0.01]-T[1.5-20/0.1]-R[0.2-6.4/0.1]
F-CPFER15-[10-100/0.01]-P[10-13/0.01]-T[1.5-20/0.1]-RTC[0.2-6.4/0.1]
F-CPFES5-[10-100/0.01]-P[2-3/0.01]-T[1.5-20/0.1]
F-CPFES6-[10-100/0.01]-P[2.5-4/0.01]-T[1.5-20/0.1]
F-CPFES7-[10-100/0.01]-P[3-5/0.01]-T0
F-CPFES7-[10-100/0.01]-P[3-5/0.01]-T[1.5-20/0.1]
F-CPFES8-[10-100/0.01]-P[4-6/0.01]-T[1.5-20/0.1]
F-CPFES9-[10-100/0.01]-P[4-7/0.01]-T[1.5-20/0.1]
F-CPFES10-[10-100/0.01]-P[5-8/0.01]-T[1.5-20/0.1]
F-CPFES11-[10-100/0.01]-P[6-9/0.01]-T[1.5-20/0.1]
F-CPFES12-[10-100/0.01]-P[7-10/0.01]-T[1.5-20/0.1]
F-CPFES13-[10-100/0.01]-P[8-11/0.01]-T[1.5-20/0.1]
F-CPFES15-[10-100/0.01]-P[10-13/0.01]-T[1.5-20/0.1]
F-CPFET5-[10-100/0.01]-P[2-3/0.01]-T[1.5-20/0.1]-K[1-45/0.5]-S[0.1-90/0.05]
F-CPFET6-[10-100/0.01]-P[2.5-4/0.01]-T[1.5-20/0.1]-K[1-45/0.5]-S[0.1-90/0.05]
F-CPFET7-[10-100/0.01]-P[3-5/0.01]-T[1.5-20/0.1]-K[1-45/0.5]-S[0.1-90/0.05]
F-CPFET8-[10-100/0.01]-P[4-6/0.01]-T[1.5-20/0.1]-K[1-45/0.5]-S[0.1-90/0.05]
F-CPFET9-[10-100/0.01]-P[4-7/0.01]-T[1.5-20/0.1]-K[1-45/0.5]-S[0.1-90/0.05]
F-CPFET10-[10-100/0.01]-P[5-8/0.01]-T[1.5-20/0.1]-K[1-45/0.5]-S[0.1-90/0.05]
F-CPFET11-[10-100/0.01]-P[6-9/0.01]-T[1.5-20/0.1]-K[1-45/0.5]-S[0.1-90/0.05]
F-CPFET12-[10-100/0.01]-P[7-10/0.01]-T[1.5-20/0.1]-K[1-45/0.5]-S[0.1-90/0.05]
F-CPFET13-[10-100/0.01]-P[8-11/0.01]-T[1.5-20/0.1]-K[1-45/0.5]-S[0.1-90/0.05]
F-CPFET15-[10-100/0.01]-P[10-13/0.01]-T[1.5-20/0.1]-K[1-45/0.5]-S[0.1-90/0.05]
F-CPFG5-[10-100/0.01]-P[2-3/0.01]-T[1.5-20/0.1]-K[20-60/0.5]
F-CPFG6-[10-100/0.01]-P[2.5-4/0.01]-T[1.5-20/0.1]-K[20-60/0.5]
F-CPFG7-[10-100/0.01]-P[3-5/0.01]-T[1.5-20/0.1]-K[20-60/0.5]
F-CPFG8-[10-100/0.01]-P[4-6/0.01]-T[1.5-20/0.1]-K[20-60/0.5]
F-CPFG9-[10-100/0.01]-P[4-7/0.01]-T[1.5-20/0.1]-K[20-60/0.5]
F-CPFG10-[10-100/0.01]-P[5-8/0.01]-T[1.5-20/0.1]-K[20-60/0.5]
F-CPFG11-[10-100/0.01]-P[6-9/0.01]-T[1.5-20/0.1]-K[20-60/0.5]
F-CPFG12-[10-100/0.01]-P[7-10/0.01]-T[1.5-20/0.1]-K[20-60/0.5]
F-CPFG13-[10-100/0.01]-P[8-11/0.01]-T[1.5-20/0.1]-K[20-60/0.5]
F-CPFG15-[10-100/0.01]-P[10-13/0.01]-T[1.5-20/0.1]-K[20-60/0.5]
F-CPFR5-[10-100/0.01]-P[2-3/0.01]-T[1.5-20/0.1]-Q[0.2-1.4/0.1]
F-CPFR5-[10-100/0.01]-P[2-3/0.01]-T[1.5-20/0.1]-R[0.2-1.4/0.1]
F-CPFR5-[10-100/0.01]-P[2-3/0.01]-T[1.5-20/0.1]-RTC[0.2-1.4/0.1]
F-CPFR6-[10-100/0.01]-P[2.5-4/0.01]-T[1.5-20/0.1]-Q[0.2-1.9/0.1]
F-CPFR6-[10-100/0.01]-P[2.5-4/0.01]-T[1.5-20/0.1]-R[0.2-1.9/0.1]
F-CPFR6-[10-100/0.01]-P[2.5-4/0.01]-T[1.5-20/0.1]-RTC[0.2-1.9/0.1]
F-CPFR7-[10-100/0.01]-P[3-7/0.01]-T[1.5-20/0.1]-Q[0.2-2.4/0.1]
F-CPFR7-[10-100/0.01]-P[3-7/0.01]-T[1.5-20/0.1]-R[0.2-2.4/0.1]
F-CPFR7-[10-100/0.01]-P[3-7/0.01]-T[1.5-20/0.1]-RTC[0.2-2.4/0.1]
F-CPFR8-[10-100/0.01]-P[4-6/0.01]-T[1.5-20/0.1]-Q[0.2-2.9/0.1]
F-CPFR8-[10-100/0.01]-P[4-6/0.01]-T[1.5-20/0.1]-R[0.2-2.9/0.1]
F-CPFR8-[10-100/0.01]-P[4-6/0.01]-T[1.5-20/0.1]-RTC[0.2-2.9/0.1]
F-CPFR9-[10-100/0.01]-P[4-7/0.01]-T[1.5-20/0.1]-Q[0.2-3.4/0.1]
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSShape type Material Shaft diameter tolerance L dimension tolerance D/P (Shaft diameter)
(mm) 		Tip shape No. (Nominal diameter)
(mm) 		L (L dimension)
(mm) 		G (Tip C chamfering width)
(mm) 		K (Tip angle)
(°) 		R (Tip R chamfering)
(mm) 		S (Tip tapered width)
(mm) 		T (Free designation core pin, head thickness)
(mm) 		Tip R tolerance alteration and R designation [RTC]
(mm)

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.024 ～ 7R910 ～ 100----1.5 ～ 200.2 ～ 3.4

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.025 ～ 8R1010 ～ 100----1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.025 ～ 8R1010 ～ 100--0.2 ～ 3.9-1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.025 ～ 8R1010 ～ 100----1.5 ～ 200.2 ～ 3.9

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.026 ～ 9R1110 ～ 100----1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.026 ～ 9R1110 ～ 100--0.2 ～ 4.4-1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.026 ～ 9R1110 ～ 100----1.5 ～ 200.2 ～ 4.4

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.027 ～ 10R1210 ～ 100----1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.027 ～ 10R1210 ～ 100--0.2 ～ 4.9-1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.027 ～ 10R1210 ～ 100----1.5 ～ 200.2 ～ 4.9

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.028 ～ 11R1310 ～ 100----1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.028 ～ 11R1310 ～ 100--0.2 ～ 5.4-1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.028 ～ 11R1310 ～ 100----1.5 ～ 200.2 ～ 5.4

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.0210 ～ 13R1510 ～ 100----1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.0210 ～ 13R1510 ～ 100--0.2 ～ 6.4-1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.0210 ～ 13R1510 ～ 100----1.5 ～ 200.2 ～ 6.4

-

1 Preventivo 10No tip shapeDH2F-0.01/-0.02+0.02/02 ～ 3No510 ～ 100----1.5 ～ 20-

-

1 Preventivo 10No tip shapeDH2F-0.01/-0.02+0.02/02.5 ～ 4No610 ～ 100----1.5 ～ 20-

-

1 Preventivo 10No tip shapeDH2F-0.01/-0.02+0.02/03 ～ 5No710 ～ 100------

-

1 Preventivo 10No tip shapeDH2F-0.01/-0.02+0.02/03 ～ 5No710 ～ 100----1.5 ～ 20-

-

1 Preventivo 10No tip shapeDH2F-0.01/-0.02+0.02/04 ～ 6No810 ～ 100----1.5 ～ 20-

-

1 Preventivo 10No tip shapeDH2F-0.01/-0.02+0.02/04 ～ 7No910 ～ 100----1.5 ～ 20-

-

1 Preventivo 10No tip shapeDH2F-0.01/-0.02+0.02/05 ～ 8No1010 ～ 100----1.5 ～ 20-

-

1 Preventivo 10No tip shapeDH2F-0.01/-0.02+0.02/06 ～ 9No1110 ～ 100----1.5 ～ 20-

-

1 Preventivo 10No tip shapeDH2F-0.01/-0.02+0.02/07 ～ 10No1210 ～ 100----1.5 ～ 20-

-

1 Preventivo 10No tip shapeDH2F-0.01/-0.02+0.02/08 ～ 11No1310 ～ 100----1.5 ～ 20-

-

1 Preventivo 10No tip shapeDH2F-0.01/-0.02+0.02/010 ～ 13No1510 ～ 100----1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.022 ～ 3T510 ～ 100-1 ～ 45-0.1 ～ 901.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.022.5 ～ 4T610 ～ 100-1 ～ 45-0.1 ～ 901.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.023 ～ 5T710 ～ 100-1 ～ 45-0.1 ～ 901.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.024 ～ 6T810 ～ 100-1 ～ 45-0.1 ～ 901.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.024 ～ 7T910 ～ 100-1 ～ 45-0.1 ～ 901.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.025 ～ 8T1010 ～ 100-1 ～ 45-0.1 ～ 901.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.026 ～ 9T1110 ～ 100-1 ～ 45-0.1 ～ 901.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.027 ～ 10T1210 ～ 100-1 ～ 45-0.1 ～ 901.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.028 ～ 11T1310 ～ 100-1 ～ 45-0.1 ～ 901.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F-0.01/-0.020/-0.0210 ～ 13T1510 ～ 100-1 ～ 45-0.1 ～ 901.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.052 ～ 3G510 ～ 100-20 ～ 60--1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.052.5 ～ 4G610 ～ 100-20 ～ 60--1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.053 ～ 5G710 ～ 100-20 ～ 60--1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.054 ～ 6G810 ～ 100-20 ～ 60--1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.054 ～ 7G910 ～ 100-20 ～ 60--1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.055 ～ 8G1010 ～ 100-20 ～ 60--1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.056 ～ 9G1110 ～ 100-20 ～ 60--1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.057 ～ 10G1210 ～ 100-20 ～ 60--1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.058 ～ 11G1310 ～ 100-20 ～ 60--1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.0510 ～ 13G1510 ～ 100-20 ～ 60--1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.022 ～ 3R510 ～ 100----1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.022 ～ 3R510 ～ 100--0.2 ～ 1.4-1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.022 ～ 3R510 ～ 100----1.5 ～ 200.2 ～ 1.4

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.022.5 ～ 4R610 ～ 100----1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.022.5 ～ 4R610 ～ 100--0.2 ～ 1.9-1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.022.5 ～ 4R610 ～ 100----1.5 ～ 200.2 ～ 1.9

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.023 ～ 7R710 ～ 100----1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.023 ～ 7R710 ～ 100--0.2 ～ 2.4-1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.023 ～ 7R710 ～ 100----1.5 ～ 200.2 ～ 2.4

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.024 ～ 6R810 ～ 100----1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.024 ～ 6R810 ～ 100--0.2 ～ 2.9-1.5 ～ 20-

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.024 ～ 6R810 ～ 100----1.5 ～ 200.2 ～ 2.9

-

1 Preventivo 10With tip shapeDH2F0/-0.0050/-0.024 ～ 7R910 ～ 100----1.5 ～ 20-

Loading...

  1. << Indietro
  2. 3
  3. 4
  4. 5
  5. 6
  6. 7
  7. Avanti >>
 

Informazioni di base

Quenching Hardening steel Gas release shape No Character engraving type No
Number of engraving characters No

Configura

Ripristina

670Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Shape type

    • No tip shape
    • With tip shape

    Ripristina

  • Material

    • SKH51
    • SKD61
    • NAK80
    • DH2F

    Ripristina

  • Shaft diameter tolerance

    • 0/-0.005
    • -0.01/-0.02

    Ripristina

  • L dimension tolerance

    • +0.02/0
    • 0/-0.02
    • 0/-0.05

    Ripristina

  • D/P (Shaft diameter)(mm)

     [2-13/0.01mmpezzi]

    Ripristina

  • Tip shape

    • No
    • C
    • G
    • T
    • R
    • B

    Ripristina

  • No. (Nominal diameter)(mm)

    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13
    • 15

    Ripristina

  • L (L dimension)(mm)

     [10-100/0.01mmpezzi]

    Ripristina

  • G (Tip C chamfering width)(mm)

     [0.1-6.4/0.05mmpezzi]

    Ripristina

  • K (Tip angle)(°)

     [0.5-60/0.5°pezzi]

    Ripristina

  • R (Tip R chamfering)(mm)

     [0.2-6.4/0.1mmpezzi]

    Ripristina

  • S (Tip tapered width)(mm)

     [0.1-90/0.05mmpezzi]

    Ripristina

  • T (Free designation core pin, head thickness)(mm)

     [1.5-20/0.1mmpezzi]

    Ripristina

  • Tip R tolerance alteration and R designation [RTC](mm)

     [0.2-6.4/0.1mmpezzi]

    Ripristina

  • Tipo

    • F-CPDB
    • F-CPDC
    • F-CPDEB
    • F-CPDEC
    • F-CPDEG
    • F-CPDER
    • F-CPDES
    • F-CPDET
    • F-CPDG
    • F-CPDR
    • F-CPDS
    • F-CPDT
    • F-CPFB
    • F-CPFC
    • F-CPFEB
    • F-CPFEC
    • F-CPFEG
    • F-CPFER
    • F-CPFES
    • F-CPFET
    • F-CPFG
    • F-CPFR
    • F-CPFS
    • F-CPFT
    • F-CPHB
    • F-CPHC
    • F-CPHEB
    • F-CPHEC
    • F-CPHEG
    • F-CPHER
    • F-CPHES
    • F-CPHET
    • F-CPHG
    • F-CPHR
    • F-CPHS
    • F-CPHT
    • F-CPNB
    • F-CPNC
    • F-CPNEB
    • F-CPNEC
    • F-CPNEG
    • F-CPNER
    • F-CPNES
    • F-CPNET
    • F-CPNG
    • F-CPNR
    • F-CPNS
    • F-CPNT

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.