Perni di contorno / cilindrici / HSS, acciaio per utensili / d,L 0,01 mm / forma della punta conica selezionabile (Codici componente - Download CAD)
Fare clic sull'immagine per ingrandirla.
Cliccare sull´immagine per ingrandirla.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
- Disegno
- Anteprima 3D L'anteprima 3D è disponibile dopo la configurazione completa
- Codici componente
- Catalogo
Codice componente:
- Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | RoHS | Material | Shaft diameter tolerance | L dimension tolerance | Tip gradient tolerance | D/P (Shaft diameter) (mm) | Step (Step shape of the first step) | Shape (Tip shape) | No. (Nominal diameter) (mm) | A (Step shape diameter) (mm) | C (Step type taper width) (mm) | F (Bearing bore length) (mm) | FC (Makes F dimension shorter than F min) (mm) | G (Tip C chamfering width) (mm) | K (Tip angle) (°) | L (L dimension) (mm) | Q (Tip R chamfering) (mm) | S (Tip tapered width) (mm) | V (Tip diameter) (mm) | VC (V dimension alteration, smaller than V min) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 | 1C | C | - | 1 ～ 5.49 | - | - | 5 ～ 9.99 | 0.1 ～ 2.7 | - | 6.5 ～ 100 | - | - | 1.5 ～ 5.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 | 1C | C | - | 1 ～ 5.49 | - | - | 5 ～ 9.99 | 0.1 ～ 2.7 | - | 6.5 ～ 100 | - | - | - | 1 ～ 1.49 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1C | C | - | 1.5 ～ 5.99 | - | 10 ～ 99.59 | - | 0.1 ～ 2.95 | - | 6.5 ～ 100 | - | - | 2 ～ 5.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1C | C | - | 1.5 ～ 5.99 | - | 10 ～ 99.59 | - | 0.1 ～ 2.95 | - | 6.5 ～ 100 | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1C | C | - | 1.5 ～ 5.99 | - | - | 5 ～ 9.99 | 0.1 ～ 2.95 | - | 6.5 ～ 100 | - | - | 2 ～ 5.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1C | C | - | 1.5 ～ 5.99 | - | - | 5 ～ 9.99 | 0.1 ～ 2.95 | - | 6.5 ～ 100 | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1D | C | - | 0.4 ～ 0.99 | 0.1 ～ 0.29 | 10 ～ 99.5 | - | 0.1 ～ 0.45 | - | 6.5 ～ 10.99 | - | - | 0.5 ～ 0.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1D | C | - | 0.4 ～ 0.99 | 0.1 ～ 0.29 | 10 ～ 99.5 | - | 0.1 ～ 0.45 | - | 6.5 ～ 10.99 | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1D | C | - | 0.4 ～ 0.99 | 0.1 ～ 0.29 | - | 5 ～ 9.99 | 0.1 ～ 0.45 | - | 6.5 ～ 10.99 | - | - | 0.5 ～ 0.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1D | C | - | 0.4 ～ 0.99 | 0.1 ～ 0.29 | - | 5 ～ 9.99 | 0.1 ～ 0.45 | - | 6.5 ～ 10.99 | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1D | C | - | 0.4 ～ 0.99 | 0.1 ～ 0.29 | 10 ～ 99.5 | - | 0.1 ～ 0.45 | - | 12 ～ 100 | - | - | 0.5 ～ 0.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1D | C | - | 0.4 ～ 0.99 | 0.1 ～ 0.29 | 10 ～ 99.5 | - | 0.1 ～ 0.45 | - | 12 ～ 100 | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1D | C | - | 0.4 ～ 0.99 | 0.1 ～ 0.29 | - | 5 ～ 9.99 | 0.1 ～ 0.45 | - | 12 ～ 100 | - | - | 0.5 ～ 0.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1D | C | - | 0.4 ～ 0.99 | 0.1 ～ 0.29 | - | 5 ～ 9.99 | 0.1 ～ 0.45 | - | 12 ～ 100 | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1D | C | - | 0.4 ～ 1.49 | 0.1 ～ 0.5 | 10 ～ 99.5 | - | 0.1 ～ 0.7 | - | 6.5 ～ 11.49 | - | - | 0.5 ～ 1.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1D | C | - | 0.4 ～ 1.49 | 0.1 ～ 0.5 | 10 ～ 99.5 | - | 0.1 ～ 0.7 | - | 6.5 ～ 11.49 | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1D | C | - | 0.4 ～ 1.49 | 0.1 ～ 0.5 | - | 5 ～ 9.99 | 0.1 ～ 0.7 | - | 6.5 ～ 11.49 | - | - | 0.5 ～ 1.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1D | C | - | 0.4 ～ 1.49 | 0.1 ～ 0.5 | - | 5 ～ 9.99 | 0.1 ～ 0.7 | - | 6.5 ～ 11.49 | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1D | C | - | 0.4 ～ 1.49 | 0.1 ～ 0.5 | 10 ～ 99.5 | - | 0.1 ～ 0.7 | - | 12 ～ 100 | - | - | 0.5 ～ 1.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1D | C | - | 0.4 ～ 1.49 | 0.1 ～ 0.5 | 10 ～ 99.5 | - | 0.1 ～ 0.7 | - | 12 ～ 100 | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1D | C | - | 0.4 ～ 1.49 | 0.1 ～ 0.5 | - | 5 ～ 9.99 | 0.1 ～ 0.7 | - | 12 ～ 100 | - | - | 0.5 ～ 1.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1D | C | - | 0.4 ～ 1.49 | 0.1 ～ 0.5 | - | 5 ～ 9.99 | 0.1 ～ 0.7 | - | 12 ～ 100 | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 2 | 1D | C | - | 0.5 ～ 1.99 | 0.1 ～ 0.5 | 10 ～ 99.5 | - | 0.1 ～ 0.95 | - | 6.5 ～ 100 | - | - | 0.5 ～ 1.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 2 | 1D | C | - | 0.5 ～ 1.99 | 0.1 ～ 0.5 | - | 5 ～ 9.99 | 0.1 ～ 0.95 | - | 6.5 ～ 100 | - | - | 0.5 ～ 1.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 2.5 | 1D | C | - | 0.5 ～ 2.49 | 0.1 ～ 0.5 | 10 ～ 99.5 | - | 0.1 ～ 1.2 | - | 6.5 ～ 100 | - | - | 0.5 ～ 2.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 2.5 | 1D | C | - | 0.5 ～ 2.49 | 0.1 ～ 0.5 | - | 5 ～ 9.99 | 0.1 ～ 1.2 | - | 6.5 ～ 100 | - | - | 0.5 ～ 2.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3 | 1D | C | - | 0.7 ～ 2.99 | 0.1 ～ 0.5 | 10 ～ 99.5 | - | 0.1 ～ 1.45 | - | 6.5 ～ 100 | - | - | 0.7 ～ 2.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3 | 1D | C | - | 0.7 ～ 2.99 | 0.1 ～ 0.5 | - | 5 ～ 9.99 | 0.1 ～ 1.45 | - | 6.5 ～ 100 | - | - | 0.7 ～ 2.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 | 1D | C | - | 0.7 ～ 3.49 | 0.1 ～ 0.5 | 10 ～ 99.5 | - | 0.1 ～ 1.7 | - | 6.5 ～ 100 | - | - | 1 ～ 3.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 | 1D | C | - | 0.7 ～ 3.49 | 0.1 ～ 0.5 | 10 ～ 99.5 | - | 0.1 ～ 1.7 | - | 6.5 ～ 100 | - | - | - | 0.7 ～ 0.99 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 | 1D | C | - | 0.7 ～ 3.49 | 0.1 ～ 0.5 | - | 5 ～ 9.99 | 0.1 ～ 1.7 | - | 6.5 ～ 100 | - | - | 1 ～ 3.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 | 1D | C | - | 0.7 ～ 3.49 | 0.1 ～ 0.5 | - | 5 ～ 9.99 | 0.1 ～ 1.7 | - | 6.5 ～ 100 | - | - | - | 0.7 ～ 0.99 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4 | 1D | C | - | 0.7 ～ 3.99 | 0.1 ～ 0.5 | 10 ～ 99.5 | - | 0.1 ～ 1.95 | - | 6.5 ～ 100 | - | - | 1 ～ 3.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4 | 1D | C | - | 0.7 ～ 3.99 | 0.1 ～ 0.5 | 10 ～ 99.5 | - | 0.1 ～ 1.95 | - | 6.5 ～ 100 | - | - | - | 0.7 ～ 0.99 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4 | 1D | C | - | 0.7 ～ 3.99 | 0.1 ～ 0.5 | - | 5 ～ 9.99 | 0.1 ～ 1.95 | - | 6.5 ～ 100 | - | - | 1 ～ 3.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4 | 1D | C | - | 0.7 ～ 3.99 | 0.1 ～ 0.5 | - | 5 ～ 9.99 | 0.1 ～ 1.95 | - | 6.5 ～ 100 | - | - | - | 0.7 ～ 0.99 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4.5 | 1D | C | - | 1 ～ 4.49 | 0.1 ～ 0.5 | 10 ～ 99.5 | - | 0.1 ～ 2.2 | - | 6.5 ～ 100 | - | - | 1 ～ 4.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4.5 | 1D | C | - | 1 ～ 4.49 | 0.1 ～ 0.5 | - | 5 ～ 9.99 | 0.1 ～ 2.2 | - | 6.5 ～ 100 | - | - | 1 ～ 4.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5 | 1D | C | - | 1 ～ 4.99 | 0.1 ～ 0.5 | 10 ～ 99.5 | - | 0.1 ～ 2.45 | - | 6.5 ～ 100 | - | - | 1 ～ 4.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5 | 1D | C | - | 1 ～ 4.99 | 0.1 ～ 0.5 | - | 5 ～ 9.99 | 0.1 ～ 2.45 | - | 6.5 ～ 100 | - | - | 1 ～ 4.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 | 1D | C | - | 1 ～ 5.49 | 0.1 ～ 0.5 | 10 ～ 99.5 | - | 0.1 ～ 2.7 | - | 6.5 ～ 100 | - | - | 1.5 ～ 5.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 | 1D | C | - | 1 ～ 5.49 | 0.1 ～ 0.5 | 10 ～ 99.5 | - | 0.1 ～ 2.7 | - | 6.5 ～ 100 | - | - | - | 1 ～ 1.49 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 | 1D | C | - | 1 ～ 5.49 | 0.1 ～ 0.5 | - | 5 ～ 9.99 | 0.1 ～ 2.7 | - | 6.5 ～ 100 | - | - | 1.5 ～ 5.49 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 | 1D | C | - | 1 ～ 5.49 | 0.1 ～ 0.5 | - | 5 ～ 9.99 | 0.1 ～ 2.7 | - | 6.5 ～ 100 | - | - | - | 1 ～ 1.49 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1D | C | - | 1.5 ～ 5.99 | 0.1 ～ 0.5 | 10 ～ 99.5 | - | 0.1 ～ 2.95 | - | 6.5 ～ 100 | - | - | 2 ～ 5.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1D | C | - | 1.5 ～ 5.99 | 0.1 ～ 0.5 | 10 ～ 99.5 | - | 0.1 ～ 2.95 | - | 6.5 ～ 100 | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1D | C | - | 1.5 ～ 5.99 | 0.1 ～ 0.5 | - | 5 ～ 9.99 | 0.1 ～ 2.95 | - | 6.5 ～ 100 | - | - | 2 ～ 5.99 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1D | C | - | 1.5 ～ 5.99 | 0.1 ～ 0.5 | - | 5 ～ 9.99 | 0.1 ～ 2.95 | - | 6.5 ～ 100 | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 0.8 ～ 0.99 | 1A | C | 1 | - | - | 10 ～ 99.6 | - | 0.1 ～ 0.45 | - | 6.5 ～ 10.98 | - | - | 0.5 ～ 0.98 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 0.8 ～ 0.99 | 1A | C | 1 | - | - | 10 ～ 99.6 | - | 0.1 ～ 0.45 | - | 6.5 ～ 10.98 | - | - | - | 0.4 ～ 0.48 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 0.8 ～ 0.99 | 1A | C | 1 | - | - | - | 5 ～ 9.99 | 0.1 ～ 0.45 | - | 6.5 ～ 10.98 | - | - | 0.5 ～ 0.98 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 0.8 ～ 0.99 | 1A | C | 1 | - | - | - | 5 ～ 9.99 | 0.1 ～ 0.45 | - | 6.5 ～ 10.98 | - | - | - | 0.4 ～ 0.48 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 0.8 ～ 0.99 | 1A | C | 1 | - | - | 10 ～ 99.6 | - | 0.1 ～ 0.45 | - | 12 ～ 100 | - | - | 0.5 ～ 0.98 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 0.8 ～ 0.99 | 1A | C | 1 | - | - | 10 ～ 99.6 | - | 0.1 ～ 0.45 | - | 12 ～ 100 | - | - | - | 0.4 ～ 0.48 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 0.8 ～ 0.99 | 1A | C | 1 | - | - | - | 5 ～ 9.99 | 0.1 ～ 0.45 | - | 12 ～ 100 | - | - | 0.5 ～ 0.98 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 0.8 ～ 0.99 | 1A | C | 1 | - | - | - | 5 ～ 9.99 | 0.1 ～ 0.45 | - | 12 ～ 100 | - | - | - | 0.4 ～ 0.48 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 ～ 1.49 | 1A | C | 1.5 | - | - | 10 ～ 99.6 | - | 0.1 ～ 0.7 | - | 6.5 ～ 11.48 | - | - | 0.5 ～ 1.48 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 ～ 1.49 | 1A | C | 1.5 | - | - | 10 ～ 99.6 | - | 0.1 ～ 0.7 | - | 6.5 ～ 11.48 | - | - | - | 0.4 ～ 0.48 | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 ～ 1.49 | 1A | C | 1.5 | - | - | - | 5 ～ 9.99 | 0.1 ～ 0.7 | - | 6.5 ～ 11.48 | - | - | 0.5 ～ 1.48 | - | ||
- | 1 | Preventivo | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 ～ 1.49 | 1A | C | 1.5 | - | - | - | 5 ～ 9.99 | 0.1 ～ 0.7 | - | 6.5 ～ 11.48 | - | - | - | 0.4 ～ 0.48 |
Loading...
Informazioni di base
| Shape type | One-step | Surface treatment | No | Head thickness | 4mm(T4) |
|---|---|---|---|---|---|
| Step (Step shape of the second step) | No second step |
Configura
Proprietà di base
-
Material
- SKH51
- SKD61
-
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
-
L dimension tolerance
- +0.02/0
- 0/-0.1
-
Tip gradient tolerance
- ±0.01
- ±0.015
-
D/P (Shaft diameter)(mm)
-
Step (Step shape of the first step)
- 1A
- 1B
- 1C
- 1D
-
No. (Nominal diameter)(mm)
-
A (Step shape diameter)(mm)
-
C (Step type taper width)(mm)
-
F (Bearing bore length)(mm)
-
FC (Makes F dimension shorter than F min)(mm)
-
G (Tip C chamfering width)(mm)
-
K (Tip angle)(°)
-
L (L dimension)(mm)
-
Q (Tip R chamfering)(mm)
-
S (Tip tapered width)(mm)
-
V (Tip diameter)(mm)
-
VC (V dimension alteration, smaller than V min)(mm)
-
Tipo
- S-CPD-1A
- S-CPD-1AB
- S-CPD-1AC
- S-CPD-1AR
- S-CPD-1AT
- S-CPD-1B
- S-CPD-1BB
- S-CPD-1BC
- S-CPD-1BR
- S-CPD-1BT
- S-CPD-1C
- S-CPD-1CB
- S-CPD-1CC
- S-CPD-1CR
- S-CPD-1CT
- S-CPD-1D
- S-CPD-1DB
- S-CPD-1DC
- S-CPD-1DR
- S-CPD-1DT
- S-CPDB-1A
- S-CPDB-1AB
- S-CPDB-1AC
- S-CPDB-1AR
- S-CPDB-1AT
- S-CPDB-1B
- S-CPDB-1BB
- S-CPDB-1BC
- S-CPDB-1BR
- S-CPDB-1BT
- S-CPDB-1C
- S-CPDB-1CB
- S-CPDB-1CC
- S-CPDB-1CR
- S-CPDB-1CT
- S-CPDB-1D
- S-CPDB-1DB
- S-CPDB-1DC
- S-CPDB-1DR
- S-CPDB-1DT
- S-CPH-1A
- S-CPH-1AB
- S-CPH-1AC
- S-CPH-1AR
- S-CPH-1AT
- S-CPH-1B
- S-CPH-1BB
- S-CPH-1BC
- S-CPH-1BR
- S-CPH-1BT
- S-CPH-1C
- S-CPH-1CB
- S-CPH-1CC
- S-CPH-1CR
- S-CPH-1CT
- S-CPH-1D
- S-CPH-1DB
- S-CPH-1DC
- S-CPH-1DR
- S-CPH-1DT
- S-CPHB-1A
- S-CPHB-1AB
- S-CPHB-1AC
- S-CPHB-1AR
- S-CPHB-1AT
- S-CPHB-1B
- S-CPHB-1BB
- S-CPHB-1BC
- S-CPHB-1BR
- S-CPHB-1BT
- S-CPHB-1C
- S-CPHB-1CB
- S-CPHB-1CC
- S-CPHB-1CR
- S-CPHB-1CT
- S-CPHB-1D
- S-CPHB-1DB
- S-CPHB-1DC
- S-CPHB-1DR
- S-CPHB-1DT
- S-CPP-1A
- S-CPP-1AB
- S-CPP-1AC
- S-CPP-1AR
- S-CPP-1AT
- S-CPP-1B
- S-CPP-1BB
- S-CPP-1BC
- S-CPP-1BR
- S-CPP-1BT
- S-CPP-1C
- S-CPP-1CB
- S-CPP-1CC
- S-CPP-1CR
- S-CPP-1CT
- S-CPP-1D
- S-CPP-1DB
- S-CPP-1DC
- S-CPP-1DR
- S-CPP-1DT
- S-CPPB-1A
- S-CPPB-1AB
- S-CPPB-1AC
- S-CPPB-1AR
- S-CPPB-1AT
- S-CPPB-1B
- S-CPPB-1BB
- S-CPPB-1BC
- S-CPPB-1BR
- S-CPPB-1BT
- S-CPPB-1C
- S-CPPB-1CB
- S-CPPB-1CC
- S-CPPB-1CR
- S-CPPB-1CT
- S-CPPB-1D
- S-CPPB-1DB
- S-CPPB-1DC
- S-CPPB-1DR
- S-CPPB-1DT
- S-CPX-1A
- S-CPX-1AB
- S-CPX-1AC
- S-CPX-1AR
- S-CPX-1AT
- S-CPX-1B
- S-CPX-1BB
- S-CPX-1BC
- S-CPX-1BR
- S-CPX-1BT
- S-CPX-1C
- S-CPX-1CB
- S-CPX-1CC
- S-CPX-1CR
- S-CPX-1CT
- S-CPX-1D
- S-CPX-1DB
- S-CPX-1DC
- S-CPX-1DR
- S-CPX-1DT
- S-CPXB-1A
- S-CPXB-1AB
- S-CPXB-1AC
- S-CPXB-1AR
- S-CPXB-1AT
- S-CPXB-1B
- S-CPXB-1BB
- S-CPXB-1BC
- S-CPXB-1BR
- S-CPXB-1BT
- S-CPXB-1C
- S-CPXB-1CB
- S-CPXB-1CC
- S-CPXB-1CR
- S-CPXB-1CT
- S-CPXB-1D
- S-CPXB-1DB
- S-CPXB-1DC
- S-CPXB-1DR
- S-CPXB-1DT
-
Shape (Tip shape)
- No processing
- C
- T
- R
- B
-
Filtrare per tipo dati CAD
- 2D
- 3D
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.