Inserti per cavità per il rilascio di gas
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
LBGV-X100-[70,80,90,100]-[100,120]
- Disegno
- Anteprima 3D L'anteprima 3D è disponibile dopo la configurazione completa
- Codici componente
- Ulteriori informazioni
- Varianti
Disegno / Specifiche del prodotto
| Numero di parte | Materiale | Durezza | Accessori | Standard di precisione |
|---|---|---|---|---|
| LBGV-X | SUS420J2 o equivalente | 31 - 35 HRC | Bulloni di spallamento (MSB) 2 pezzi | Ortogonalità delle superfici A/B 0,02 mm o meno per 100 mm Parallelismo delle superfici superiore/inferiore 0,0,2 mm o meno per 100 mm |
Tabella delle specifiche
| Numero di piastre | Numero di scanalature | Bulloni forniti | S | Numero di parte | B | T | |
|---|---|---|---|---|---|---|---|
| Tipo | A | ||||||
| 5 | 21 | MSB8 - 40 | 0,03 | LBGV-X | 100 | 70 | 100 120 |
| 6 | 28 | MSB8 - 50 | 80 | ||||
| 7 | 35 | MSB8 - 60 | 90 | ||||
| 8 | 42 | MSB8 - 70 | 100 | ||||
Ordine
Codice componente:
- Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.
Loading...
Codice componente
|
|---|
| LBGV-X100-[70,80,90,100]-[100,120] |
| Codice componente | Quantità minima d'ordine | Sconto volumi elevati | B (orizzontale) (mm) | T (altezza) (mm) | |
|---|---|---|---|---|---|
| 1 | 12 giorni | 70 ～ 100 | 100 ～ 120 |
Loading...
Related Information
■ Cavity Inserts for Gas Release List
| Shape Type | Shape | Size lineup | Material | Part Number | Characteristics |
|---|---|---|---|---|---|
| Harmonica |
| A (Length): 100 B (Width): 70 to 100 T (Height): 60 to 120 | SUS420J2 or equivalent | LBGV-X | A product for large molds with excellent corrosion resistance. Suitable for use with super engineering plastics and engineering plastics. |
| A (Length): 40, 80 B (Width): 40 to 80 T (Height): 12 to 80 | S50C | BGV | A product for medium-sized or smaller products. Also suitable for use with general-purpose resin. | ||
| Round shape |
| D (Diameter): 6, 8, 10 L (Length): 10, 12, 15 | SUS440C | BGVS | Excellent corrosion resistance, releasing gas from the round outer slit. |
● Harmonica Shape Overview
| ■ Features ・ A specific number of plates given gas release groove (S) processing is combined to make a gas release cavity insert block (Figure 1) ・ Clogged resin or tar can easily be removed by removing the fixing bolt (MSB) and disassembling during maintenance. ・ Gas as well as air is released from 0.03 or 0.05mm groove, lowering flow resistance and facilitating molding ・ The vent surface can be processed to suit the shape of finished products (See Example) ・ Effective in releasing gas during mold processing in medium to large size molds | |
| ■ How to Mount 1. Insert where gas is apt to collect such as final filling section. 2. Process the vent surface to suit product type as necessary. 3. We recommend the addition of a relief groove in order to decrease resin clogging in the gas release groove. Ideally, a relief groove should be added by alteration of approximately 0.5 to 1.0 mm thickness, leaving 5 to 12 mm of the gas release groove from the vent surface. (Figure 2) 4. A/B dimension tolerances are positive. Insert into mold by actual fitting process. 5. A tap hole is added on the bottom of the cavity insert. It is for fixing the insert. (See Example) | |
| ■ When Using 1. In BGV, (S) can be selected. Select 0.03 for groove depth when resin has a high fluidity, and 0.05 when resin has a low fluidity. 2. Be sure to identify bolt hole and tap hole (BGV only) on the inside of the cavity insert in the blueprint when processing the vent surface, to avoid problems. 3. Note that tapering on the vent surface enlarges the groove area and may cause clogging. 4. Positioning should be carefully done since the groove shapes may appear on the finished product depending on the groove depth and the kind of resin. 5. This product achieves dimensional precision by performing the final machining in the shape of a block which is a combination of plates with gas release grooves. Be sure to reassemble in the original order if you happen to disassemble it. You can identify the correct order by the diagonal 0.1 mm depth V groove on the bottom of the insert. Slight imbalance may occur due to the precision error in shoulder bolt and hole. Thus assembly should be done on a flat surface with dimension fitting. 6. Each plate for BGV is raw material. Note that it will be damaged if struck with a hard object. |
Alterazioni
Informazioni di base
| A (verticale)(mm) | 100 |
|---|
Configura
Proprietà di base
-
Tipo
- LBGV-X
-
B (orizzontale)(mm)
-
T (altezza)(mm)
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 12 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.