• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

XAL series carbide square end mill, 2-flute / 3D Flute Length model (Codici componente)

XAL series carbide square end mill, 2-flute / 3D Flute Length model

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

  • Sconto volumi elevati

MISUMI

MISUMI

The Misumi's unique lineup of fine flute length is available at attractive low prices
  • XAL
  • General Steel
  • 2 Flutes

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

XAL series carbide square end mill, 2-flute / 3D Flute Length model:Related Image
Numero di dati da visualizzare
30
45
60
  1. << Indietro
  2. 1
  3. 2
Codice componente
XAL-PEM2R4-4
XAL-PEM2R4.1
XAL-PEM2R4.2
XAL-PEM2R4.3
XAL-PEM2R4.4
XAL-PEM2R4.5
XAL-PEM2R4.6
XAL-PEM2R4.7
XAL-PEM2R4.8
XAL-PEM2R4.9
XAL-PEM2R5
XAL-PEM2R5.1
XAL-PEM2R5.2
XAL-PEM2R5.3
XAL-PEM2R5.4
XAL-PEM2R5.5
XAL-PEM2R5.6
XAL-PEM2R5.7
XAL-PEM2R5.8
XAL-PEM2R5.9
XAL-PEM2R6
XAL-PEM2R6.5
XAL-PEM2R7
XAL-PEM2R7.5
XAL-PEM2R8
XAL-PEM2R8.5
XAL-PEM2R9
XAL-PEM2R9.5
XAL-PEM2R10
XAL-PEM2R11
XAL-PEM2R12
XAL-PEM2R16
XAL-PEM2R18
XAL-PEM2R20
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Outer Diameter (D)
(φ) 		Work Material Flute Length (ℓ)
(mm) 		Shank Diameter (d)
(mm) 		Overall Length (L)
(mm) 		Processing Applications Geometry Figure

9.17 €

1 Disponibile 5 giorni 4General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[◎] / Copper Alloy[◎]12450Flat Surface / Side Surface / Scanalatura / Inclined CuttingSharp Corner2

22.89 €

1 Disponibile 5 giorni 4.1General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]12.3650Flat Surface / Side Surface / Inclined CuttingSharp Corner1

22.89 €

1 Disponibile 5 giorni 4.2General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]12.6650Flat Surface / Side Surface / Inclined CuttingSharp Corner1

22.89 €

1 Disponibile 5 giorni 4.3General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]12.9650Flat Surface / Side Surface / Inclined CuttingSharp Corner1

22.89 €

1 Disponibile 5 giorni 4.4General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]13.2650Flat Surface / Side Surface / Inclined CuttingSharp Corner1

16.17 €

1 Disponibile 5 giorni 4.5General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[◎] / Copper Alloy[◎]13.5650Flat Surface / Side Surface / Scanalatura / Inclined CuttingSharp Corner1

26.31 €

1 Disponibile 5 giorni 4.6General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]13.8655Flat Surface / Side Surface / Inclined CuttingSharp Corner1

26.31 €

1 Disponibile 5 giorni 4.7General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]14.1655Flat Surface / Side Surface / Inclined CuttingSharp Corner1

26.31 €

1 Disponibile 5 giorni 4.8General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]14.4655Flat Surface / Side Surface / Inclined CuttingSharp Corner1

26.31 €

1 Disponibile 5 giorni 4.9General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]14.7655Flat Surface / Side Surface / Inclined CuttingSharp Corner1

9.75 €

1 Disponibile 5 giorni 5General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[◎] / Copper Alloy[◎]15655Flat Surface / Side Surface / Scanalatura / Inclined CuttingSharp Corner1

26.31 €

1 Disponibile 5 giorni 5.1General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]15.3655Flat Surface / Side Surface / Inclined CuttingSharp Corner1

26.31 €

1 Disponibile 5 giorni 5.2General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]15.6655Flat Surface / Side Surface / Inclined CuttingSharp Corner1

26.31 €

1 Disponibile 5 giorni 5.3General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]15.9655Flat Surface / Side Surface / Inclined CuttingSharp Corner1

26.31 €

1 Disponibile 5 giorni 5.4General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]16.2655Flat Surface / Side Surface / Inclined CuttingSharp Corner1

16.28 €

1 Disponibile 5 giorni 5.5General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[◎] / Copper Alloy[◎]16.5655Flat Surface / Side Surface / Scanalatura / Inclined CuttingSharp Corner1

27.21 €

1 Disponibile 5 giorni 5.6General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]16.8660Flat Surface / Side Surface / Inclined CuttingSharp Corner1

27.21 €

1 Disponibile 5 giorni 5.7General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]17.1660Flat Surface / Side Surface / Inclined CuttingSharp Corner1

27.21 €

1 Disponibile 5 giorni 5.8General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]17.4660Flat Surface / Side Surface / Inclined CuttingSharp Corner1

27.21 €

1 Disponibile 5 giorni 5.9General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]17.7660Flat Surface / Side Surface / Inclined CuttingSharp Corner1

11.55 €

1 Disponibile 5 giorni 6General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[◎] / Copper Alloy[◎]18660Flat Surface / Side Surface / Scanalatura / Inclined CuttingSharp Corner2

40.34 €

1 Disponibile 5 giorni 6.5General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]19.5860Flat Surface / Side Surface / Inclined CuttingSharp Corner1

30.21 €

1 Disponibile 5 giorni 7General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[◎] / Copper Alloy[◎]21860Flat Surface / Side Surface / Scanalatura / Inclined CuttingSharp Corner1

45.08 €

1 Disponibile 5 giorni 7.5General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]22.5870Flat Surface / Side Surface / Inclined CuttingSharp Corner1

19.74 €

1 Disponibile 5 giorni 8General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[◎] / Copper Alloy[◎]24870Flat Surface / Side Surface / Scanalatura / Inclined CuttingSharp Corner2

54.16 €

1 Disponibile 5 giorni 8.5General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]25.51070Flat Surface / Side Surface / Inclined CuttingSharp Corner1

42.91 €

1 Disponibile 5 giorni 9General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[◎] / Copper Alloy[◎]271070Flat Surface / Side Surface / Scanalatura / Inclined CuttingSharp Corner1

56.17 €

1 Disponibile 5 giorni 9.5General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]28.51075Flat Surface / Side Surface / Inclined CuttingSharp Corner1

29.47 €

1 Disponibile 5 giorni 10General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[◎] / Copper Alloy[◎]301080Flat Surface / Side Surface / Scanalatura / Inclined CuttingSharp Corner2

61.20 €

1 Disponibile 5 giorni 11General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[◎] / Copper Alloy[◎]331285Flat Surface / Side Surface / Scanalatura / Inclined CuttingSharp Corner1

42.77 €

1 Disponibile 5 giorni 12General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[◎] / Copper Alloy[◎]361285Flat Surface / Side Surface / Scanalatura / Inclined CuttingSharp Corner2

79.42 €

1 Disponibile 5 giorni 16General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[◎] / Copper Alloy[◎]4816110Flat Surface / Side Surface / Scanalatura / Inclined CuttingSharp Corner2

132.28 €

1 Disponibile 5 giorni 18General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resina[○]5416110Flat Surface / Side Surface / Inclined CuttingSharp Corner1

133.81 €

1 Disponibile 5 giorni 20General Steel[◎] / Heat-Treated Steel[◎] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[◎] / Copper Alloy[◎]6020110Flat Surface / Side Surface / Scanalatura / Inclined CuttingSharp Corner2

Loading...

  1. << Indietro
  2. 1
  3. 2

Specifiche

XAL series carbide square end mill, 2-flute / 3D Flute Length model:Related Image

Model Number     Shank Diameter
d		 Flute Length
ℓ		 Overall Length
L		 Figure Standards Y/N
Outer Diameter
D		 Shank Diameter
d
Standard Sharp Edge
XAL-EM2R
(Standard)

XAL-PEM2R
(Sharp Edge)		 0.1 — 3 0.3 40 1 No Standards ●
0.2 — 3 0.6 40 1 No Standards ●
0.3 — 3 0.9 40 1 ● ●
0.4 — 3 1.2 40 1 No Standards ●
0.5 — 3 1.5 40 1 ● ●
0.6 — 3 1.8 40 1 ● ●
0.7 — 3 2.1 40 1 No Standards ●
0.8 — 3 2.4 40 1 ● ●
0.9 — 4 2.7 45 1 No Standards ●
1 — 4 3 45 1 ● ●
1.1 — 4 3.3 45 1 No Standards ●
1.2 — 4 3.6 45 1 No Standards ●
1.3 — 4 3.9 45 1 No Standards ●
1.4 — 4 4.2 45 1 No Standards ●
1.5 — 4 4.5 45 1 ● ●
1.6 — 4 4.8 45 1 No Standards ●
1.7 — 4 5.1 45 1 No Standards ●
1.8 — 4 5.4 45 1 No Standards ●
1.9 — 4 5.7 45 1 No Standards ●
2 — 4 6 45 1 ● ●
2.1 — 4 6.3 45 1 No Standards ●
2.2 — 4 6.6 45 1 No Standards ●
2.3 — 4 6.9 45 1 No Standards ●
2.4 — 4 7.2 45 1 No Standards ●
2.5 — 4 7.5 45 1 No Standards ●
2.6 — 4 7.8 45 1 No Standards ●
2.7 — 4 8.1 45 1 No Standards ●
2.8 — 4 8.4 45 1 No Standards ●
2.9 — 4 8.7 45 1 No Standards ●
3 4 4 9 45 1 No Standards ●
3 — 6 9 45 1 ● ●
3.1 — 6 9.3 45 1 No Standards ●
3.2 — 6 9.6 45 1 No Standards ●
3.3 — 6 9.9 45 1 No Standards ●

[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).

Model Number     Shank Diameter
d		 Flute Length
ℓ		 Overall Length
L		 Figure Standards Y/N
Outer Diameter
D		 Shank Diameter
d
Standard Sharp Edge
XAL-EM2R
(Standard)

XAL-PEM2R
(Sharp Edge)		 3.4 — 6 10.2 45 1 No Standards ●
3.5 — 6 10.5 45 1 ● ●
3.6 — 6 10.8 45 1 No Standards ●
3.7 — 6 11.1 45 1 No Standards ●
3.8 — 6 11.4 45 1 No Standards ●
3.9 — 6 11.7 45 1 No Standards ●
4 4 4 12 50 2 No Standards ●
4 — 6 12 50 1 ● ●
4.1 — 6 12.3 50 1 No Standards ●
4.2 — 6 12.6 50 1 No Standards ●
4.3 — 6 12.9 50 1 No Standards ●
4.4 — 6 13.2 50 1 No Standards ●
4.5 — 6 13.5 50 1 No Standards ●
4.6 — 6 13.8 55 1 No Standards ●
4.7 — 6 14.1 55 1 No Standards ●
4.8 — 6 14.4 55 1 No Standards ●
4.9 — 6 14.7 55 1 No Standards ●
5 — 6 15 55 1 ● ●
5.1 — 6 15.3 55 1 No Standards ●
5.2 — 6 15.6 55 1 No Standards ●
5.3 — 6 15.9 55 1 No Standards ●
5.4 — 6 16.2 55 1 No Standards ●
5.5 — 6 16.5 55 1 No Standards ●
5.6 — 6 16.8 60 1 No Standards ●
5.7 — 6 17.1 60 1 No Standards ●
5.8 — 6 17.4 60 1 No Standards ●
5.9 — 6 17.7 60 1 No Standards ●
6 — 6 18 60 2 ● ●
6.5 — 8 19.5 60 1 No Standards ●
7 — 8 21 60 1 ● ●
7.5 — 8 22.5 70 1 No Standards ●
8 — 8 24 70 2 ● ●
8.5 — 10 25.5 70 1 No Standards ●
9 — 10 27 70 1 No Standards ●
9.5 — 10 28.5 75 1 No Standards ●
10 — 10 30 80 2 ● ●
11 — 12 33 85 1 No Standards ●
12 — 12 36 85 2 ● ●
14 — 12 42 80 3 ● No Standards
16 — 16 48 110 2 ● ●
18 — 16 54 110 3 No Standards ●
20 — 20 60 110 2 ● ●

[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).

Più Informazioni


● An affordable set price that moves according to quantity from 3 pieces and up.
● The XAL coating with excellent lubricity delivers stable wear-resistant performance, especially when milling raw materials, giving improved shape accuracy to the machined objects.
● 2-flute end mill with a wide operating range. Use for a variety of applications.
[ ! ]The XAL coating does not have conductive properties. Cannot be used with conduction model tool setters.

Informazioni di base

Number of Flutes(sheet) 2 Model Tipo quadrato Coating For General Steel (AlCrN etc.)
Torsion Angle (θ) Standard Helix (30 to 40°) Additional Classification Stocked Product Tolerance of OD(mm) 0 ~ -0.02
● Inventory Product □ Manufacturer Product ●

Configura

Ripristina

94Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Outer Diameter (D)(φ)

    • 0.1
    • 0.2
    • 0.3
    • 0.4
    • 0.5
    • 0.6
    • 0.7
    • 0.8
    • 0.9
    • 1
    • 1.1
    • 1.2
    • 1.3
    • 1.4
    • 1.5
    • 1.6
    • 1.7
    • 1.8
    • 1.9
    • 2
    • 2.1
    • 2.2
    • 2.3
    • 2.4
    • 2.5
    • 2.6
    • 2.7
    • 2.8
    • 2.9
    • 3
    • 3.1
    • 3.2
    • 3.3
    • 3.4
    • 3.5
    • 3.6
    • 3.7
    • 3.8
    • 3.9
    • 4
    • 4.1
    • 4.2
    • 4.3
    • 4.4
    • 4.5
    • 4.6
    • 4.7
    • 4.8
    • 4.9
    • 5
    • 5.1
    • 5.2
    • 5.3
    • 5.4
    • 5.5
    • 5.6
    • 5.7
    • 5.8
    • 5.9
    • 6
    • 6.5
    • 7
    • 7.5
    • 8
    • 8.5
    • 9
    • 9.5
    • 10
    • 11
    • 12
    • 14
    • 16
    • 18
    • 20

    Ripristina

  • Work Material

    • General Steel
    • Heat-Treated Steel
    • Acciaio inox
    • Ghisa
    • Aluminum Alloy
    • Copper Alloy
    • Resina

    Ripristina

  • Flute Length (ℓ)(mm)

    • 0.3
    • 0.6
    • 0.9
    • 1.2
    • 1.5
    • 1.8
    • 2.1
    • 2.4
    • 2.7
    • 3
    • 3.3
    • 3.6
    • 3.9
    • 4.2
    • 4.5
    • 4.8
    • 5.1
    • 5.4
    • 5.7
    • 6
    • 6.3
    • 6.6
    • 6.9
    • 7.2
    • 7.5
    • 7.8
    • 8.1
    • 8.4
    • 8.7
    • 9
    • 9.3
    • 9.6
    • 9.9
    • 10.2
    • 10.5
    • 10.8
    • 11.1
    • 11.4
    • 11.7
    • 12
    • 12.3
    • 12.6
    • 12.9
    • 13.2
    • 13.5
    • 13.8
    • 14.1
    • 14.4
    • 14.7
    • 15
    • 15.3
    • 15.6
    • 15.9
    • 16.2
    • 16.5
    • 16.8
    • 17.1
    • 17.4
    • 17.7
    • 18
    • 19.5
    • 21
    • 22.5
    • 24
    • 25.5
    • 27
    • 28.5
    • 30
    • 33
    • 36
    • 42
    • 48
    • 54
    • 60

    Ripristina

  • Shank Diameter (d)(mm)

    • 3
    • 4
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Ripristina

  • Overall Length (L)(mm)

    • 40
    • 45
    • 50
    • 55
    • 60
    • 70
    • 75
    • 80
    • 85
    • 110

    Ripristina

  • Processing Applications

    • Flat Surface
    • Side Surface
    • Scanalatura
    • Inclined Cutting

    Ripristina

  • Geometry

    • Sharp Corner
    • Con puntale

    Ripristina

  • Tipo

    • XAL-EM2R
    • XAL-PEM2R

    Ripristina

Filtrare per giorni di spedizione standard

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.