Registrati
Confermato
  • Outer Diameter (D)(φ)
  • Flute Length (ℓ)(mm)
  • Shank Diameter (d)(mm)
  • Overall Length (L)(mm)
  • Length Under Neck (ℓ1)(mm)
  • Processing Applications
  • Geometry
  • Torsion Angle (θ)
  • Additional Classification
  • Tipo
  • Giorni di spedizione est.
    • Tutti
    • Entro 5 giorni lavorativi
MISUMI

TSC series carbide long neck square end mill, 2-flute / long neck model (TSC-PEM2LB1.5-25)

TSC series carbide long neck square end mill, 2-flute / long neck model TSC-PEM2LB1.5-25
  • TSC series carbide long neck square end mill, 2-flute / long neck model
  • TSC series carbide long neck square end mill, 2-flute / long neck model

Codice componente:

TSC-PEM2LB1.5-25
Cancella
    Quantità:
    Loading...

    Disegno schematico

    TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

    Elenco numeri di parte

    Numero di articoli
  • 1
    • Codice componente
    TSC-PEM2LB1.5-25

    Outer Diameter (D)

    (φ)

    Flute Length (ℓ)

    (mm)

    Shank Diameter (d)

    (mm)

    Overall Length (L)

    (mm)

    Length Under Neck (ℓ1)

    (mm)

    Processing Applications

    Geometry

    Torsion Angle (θ)

    Additional Classification

    Figure

    ● Inventory Product □ Manufacturer Product

    Under Neck Diameter d1

    (mm)

    Actual Effective Length Depends on Work Inclination Angle 30'

    (mm)

    Actual Effective Length Depends on Work Inclination Angle 1°

    (mm)

    Actual Effective Length Depends on Work Inclination Angle 2°

    (mm)

    Actual Effective Length Depends on Work Inclination Angle 3°

    (mm)

    Length Under Neck (θ)

    		Quantità minima d'ordine
    1.5
    2.3
    4
    70
    25
    Flat Surface / Side Surface / Scanalatura / Inclined Cutting
    Sharp Corner
    Standard Helix (30 to 40°)
    Stocked Product
    1
    ●
    1.45
    26.18
    27.47
    30.51
    Without Interference
    10°
    1 pezzi
    Prezzo unitario (IVA esclusa)(Prezzo unitario IVA inclusa)
    Giorni spedizione standard
    21.89 €
    ( 26.05 € )
    5 giorni lavorativi
  • 1

    • Ulteriori informazioni

    Informazioni di base

    [Caratteristiche] -Dimostra elevate prestazioni nella lavorazione di acciai generici, EN 1.4301 Equiv. (SUS304) e acciai trattati termicamente (fino a 50 HRC) -Può selezionare la lunghezza ottimale del corpo per la lavorazione di parti profonde del pezzo -Ottimo per la lavorazione nell'intervallo di rotazione medio-basso grazie all'angolo elicoidale universale di 30° -E' dotato di un rivestimento con elevata resistenza all'ossidazione e alta durezza e raggiunge una lunga durata. Efficace nella lavorazione ad alta velocità e nella lavorazione a secco come caratteristiche del rivestimento.

    Specifiche e prezzo

    Specifiche

    TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

    Model Number
    TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

    Outer Diameter
    D    		 Length Under Neck
    ℓ1    		 Shank Diameter
    d    		 Shank Diameter
    d    		 Standard Sharp Edge Flute Length
    ℓ    		 Under Neck Diameter
    d1    		 Overall Length
    L    		 Under Neck Angle
    θ    		 Actual Effective Length Depends on Work Inclination Angle Figure
    30' 1° 2° 3°
    0.1 0.3 - 4 No Standards ● 0.2 0.085 50 10° 0.31 0.33 0.37 0.41 1
    0.5 No Standards ● 0.52 0.55 0.61 0.69
    1 No Standards ● 1.05 1.10 1.22 1.37
    0.2 0.5 - 4 No Standards ● 0.3 0.18 50 10° 0.52 0.55 0.61 0.69 1
    1 ● ● 1.05 1.10 1.22 1.37
    1.5 ● ● 1.57 1.65 1.83 2.06
    2 No Standards ● 2.09 2.20 2.44 2.75
    2.5 No Standards ● 2.62 2.75 3.05 3.43
    3 No Standards ● 3.14 3.30 3.66 4.12
    3.5 No Standards ● 3.66 3.85 4.27 4.81
    4 No Standards ● 4.19 4.40 4.88 5.49
    0.3 1 - 4 ● ● 0.45 0.28 50 10° 1.05 1.10 1.22 1.37 1
    1.5 No Standards ● 1.57 1.65 1.83 2.06
    2 ● ● 2.09 2.20 2.44 2.75
    2.5 No Standards ● 2.62 2.75 3.05 3.43
    3 ● ● 3.14 3.30 3.66 4.12
    4 ● ● 4.19 4.40 4.88 5.49
    5 ● ● 5.24 5.49 6.10 6.87
    6 No Standards ● 6.28 6.59 7.32 8.24
    9 No Standards ● 9.42 9.89 10.98 12.36
    0.4 1 - 4 No Standards ● 0.6 0.37 50 10° 1.05 1.10 1.22 1.37 1
    2 ● ● 2.09 2.20 2.44 2.75
    2 6 6 ● ● 15° 2.06 2.13 2.28 2.45
    3 - 4 ● ● 10° 3.14 3.30 3.66 4.12
    4 ● ● 4.19 4.40 4.88 5.49
    5 ● ● 5.24 5.49 6.10 6.87
    6 ● ● 6.28 6.59 7.32 8.24
    7 No Standards ● 7.33 7.69 8.54 9.61
    8 No Standards ● 8.38 8.79 9.76 10.98
    9 No Standards ● 9.42 9.89 10.98 12.36
    10 No Standards ● 10.47 10.99 12.21 13.73
    12 No Standards ● 12.57 13.19 14.65 16.48

    [ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

    Model Number
    TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

    Outer Diameter
    D    		 Length Under Neck
    ℓ1    		 Shank Diameter
    d    		 Shank Diameter
    d    		 Standard Sharp Edge Flute Length
    ℓ    		 Under Neck Diameter
    d1    		 Overall Length
    L    		 Under Neck Angle
    θ    		 Actual Effective Length Depends on Work Inclination Angle Figure
    30' 1° 2° 3°
    0.5 1 - 4 No Standards ● 0.7 0.46 50 10° 1.05 1.10 1.22 1.37 1
    2 ● ● 2.09 2.20 2.44 2.75
    3 No Standards ● 3.14 3.30 3.66 4.12
    4 ● ● 4.19 4.40 4.88 5.49
    4 6 6 ● ● 15° 4.13 4.26 4.56 4.91
    5 - 4 No Standards ● 10° 5.24 5.49 6.10 6.87
    6 ● ● 6.28 6.59 7.32 8.24
    7 No Standards ● 7.33 7.69 8.54 9.61
    8 ● ● 8.38 8.79 9.76 10.98
    9 No Standards ● 9.42 9.89 10.98 12.36
    10 ● ● 10.47 10.99 12.21 13.73
    12 ● ● 12.57 13.19 14.65 16.48
    15 ● ● 15.71 16.48 18.31 20.60
    0.6 2 - 4 ● ● 0.9 0.56 50 10° 2.09 2.20 2.44 2.75 1
    3 No Standards ● 3.14 3.30 3.66 4.12
    4 ● ● 4.19 4.40 4.88 5.49
    4 6 6 ● ● 15° 4.13 4.26 4.56 4.91
    6 - 4 ● ● 10° 6.28 6.59 7.32 8.24
    7 No Standards ● 7.33 7.69 8.54 9.61
    8 ● ● 8.38 8.79 9.76 10.98
    10 ● ● 10.47 10.99 12.21 13.73
    12 ● ● 12.57 13.19 14.65 16.48
    15 ● ● 15.71 16.48 18.31 20.60
    18 No Standards ● 70 18.85 19.78 21.97 24.71
    0.7 2 - 4 ● ● 1.05 0.66 50 10° 2.09 2.20 2.44 2.75 1
    4 ● ● 4.19 4.40 4.88 5.49
    6 ● ● 6.28 6.59 7.32 8.24
    8 ● ● 8.38 8.79 9.76 10.98
    10 No Standards ● 10.47 10.99 12.21 13.73
    0.8 4 - 4 ● ● 1.2 0.76 50 10° 4.19 4.40 4.88 5.49 1
    6 ● ● 6.28 6.59 7.32 8.24
    8 ● ● 8.38 8.79 9.76 10.98
    10 ● ● 10.47 10.99 12.21 13.73
    12 ● ● 12.57 13.19 14.65 16.48
    14 No Standards ● 14.66 15.39 17.09 19.22
    16 No Standards ● 16.75 17.58 19.53 21.97
    20 No Standards ● 70 20.94 21.98 24.41 27.46
    24 No Standards ● 25.13 26.38 29.29 Without Interference
    0.9 4 - 4 No Standards ● 1.35 0.85 50 10° 4.19 4.40 4.88 5.49 1
    6 ● ● 6.28 6.59 7.32 8.24
    8 ● ● 8.38 8.79 9.76 10.98
    10 No Standards ● 10.47 10.99 12.21 13.73
    15 No Standards ● 15.71 16.48 18.31 20.60
    1 3 - 4 No Standards ● 1.5 0.95 50 10° 3.14 3.30 3.66 4.12 1
    4 ● ● 4.19 4.40 4.88 5.49
    5 No Standards ● 5.24 5.49 6.10 6.87
    6 ● ● 6.28 6.59 7.32 8.24
    6 6 6 ● ● 15° 6.19 6.39 6.84 7.36
    7 - 4 No Standards ● 10° 7.33 7.69 8.54 9.61
    8 ● ● 8.38 8.79 9.76 10.98
    9 No Standards ● 9.42 9.89 10.98 12.36
    10 ● ● 10.47 10.99 12.21 13.73
    12 ● ● 12.57 13.19 14.65 16.48
    14 ● ● 14.66 15.39 17.09 19.22
    16 ● ● 16.75 17.58 19.53 21.97
    18 No Standards ● 70 18.85 19.78 21.97 24.71
    20 ● ● 20.94 21.98 24.41 27.46
    22 No Standards ● 23.04 24.18 26.85 Without Interference
    25 ● ● 26.18 27.47 30.51 Without Interference
    30 ● ● 31.41 32.97 36.62 Without Interference
    1.2 6 - 4 ● ● 1.8 1.15 50 10° 6.28 6.59 7.32 8.24 1
    8 ● ● 8.38 8.79 9.76 10.98
    10 ● ● 10.47 10.99 12.21 13.73
    12 ● ● 12.57 13.19 14.65 16.48
    16 ● ● 16.75 17.58 19.53 21.97

    [ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

    Model Number
    TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

    Outer Diameter
    D    		 Length Under Neck
    ℓ1    		 Shank Diameter
    d    		 Shank Diameter
    d    		 Standard Sharp Edge Flute Length
    ℓ    		 Under Neck Diameter
    d1    		 Overall Length
    L    		 Under Neck Angle
    θ    		 Actual Effective Length Depends on Work Inclination Angle Figure
    30' 1° 2° 3°
    1.4 6 - 4 No Standards ● 2.1 1.35 50 10° 6.28 6.59 7.32 8.24 1
    8 No Standards ● 8.38 8.79 9.76 10.98
    10 No Standards ● 10.47 10.99 12.21 13.73
    12 No Standards ● 12.57 13.19 14.65 16.48
    14 No Standards ● 14.66 15.39 17.09 19.22
    16 No Standards ● 16.75 17.58 19.53 21.97
    1.5 4 - 4 No Standards ● 2.3 1.45 50 10° 4.19 4.40 4.88 5.49 1
    6 ● ● 6.28 6.59 7.32 8.24
    8 ● ● 8.38 8.79 9.76 10.98
    10 ● ● 10.47 10.99 12.21 13.73
    12 ● ● 12.57 13.19 14.65 16.48
    14 ● ● 14.66 15.39 17.09 19.22
    16 ● ● 16.75 17.58 19.53 21.97
    18 ● ● 70 18.85 19.78 21.97 24.71
    20 ● ● 20.94 21.98 24.41 Without Interference
    25 No Standards ● 26.18 27.47 30.51 Without Interference
    30 No Standards ● 31.41 32.97 Without Interference Without Interference
    35 No Standards ● 100 36.65 38.46 Without Interference Without Interference
    40 No Standards ● 41.88 43.96 Without Interference Without Interference
    45 No Standards ● 47.12 49.45 Without Interference Without Interference
    1.6 6 - 4 No Standards ● 2.4 1.55 50 10° 6.28 6.59 7.32 8.24 1
    8 No Standards ● 8.38 8.79 9.76 10.98
    10 No Standards ● 10.47 10.99 12.21 13.73
    12 No Standards ● 12.57 13.19 14.65 16.48
    14 No Standards ● 14.66 15.39 17.09 19.22
    16 No Standards ● 16.75 17.58 19.53 21.97
    18 No Standards ● 70 18.85 19.78 21.97 Without Interference
    20 No Standards ● 20.94 21.98 24.41 Without Interference
    26 No Standards ● 27.22 28.57 31.73 Without Interference
    1.8 6 - 4 No Standards ● 2.7 1.75 50 10° 6.28 6.59 7.32 8.24 1
    8 No Standards ● 8.38 8.79 9.76 10.98
    10 No Standards ● 10.47 10.99 12.21 13.73
    12 No Standards ● 12.57 13.19 14.65 16.48
    14 No Standards ● 14.66 15.39 17.09 19.22
    16 No Standards ● 16.75 17.58 19.53 Without Interference
    18 No Standards ● 70 18.85 19.78 21.97 Without Interference
    20 No Standards ● 20.94 21.98 24.41 Without Interference
    25 No Standards ● 26.18 27.47 30.51 Without Interference
    2 6 - 4 ● ● 3 1.95 50 10° 6.28 6.59 7.32 8.24 1
    8 ● ● 8.38 8.79 9.76 10.98
    10 ● ● 10.47 10.99 12.21 13.73
    10 6 6 ● ● 15° 10.31 10.65 11.40 12.27
    12 - 4 ● ● 10° 12.57 13.19 14.65 16.48
    14 ● ● 14.66 15.39 17.09 19.22
    16 ● ● 16.75 17.58 19.53 Without Interference
    18 ● ● 70 18.85 19.78 21.97 Without Interference
    20 ● ● 20.94 21.98 24.41 Without Interference
    25 ● ● 26.18 27.47 Without Interference Without Interference
    30 ● ● 31.41 32.97 Without Interference Without Interference
    35 No Standards ● 100 36.65 38.46 Without Interference Without Interference
    40 No Standards ● 41.88 43.96 Without Interference Without Interference
    50 No Standards ● 52.35 54.95 Without Interference Without Interference
    60 No Standards ● 62.83 Without Interference Without Interference Without Interference
    2.5 8 - 4 ● ● 3.8 2.4 50 10° 8.38 8.79 9.76 10.98 1
    10 No Standards ● 10.47 10.99 12.21 13.73
    12 ● ● 12.57 13.19 14.65 Without Interference
    14 No Standards ● 14.66 15.39 17.09 Without Interference
    16 ● ● 16.75 17.58 19.53 Without Interference
    18 No Standards ● 70 18.85 19.78 Without Interference Without Interference
    20 ● ● 20.94 21.98 Without Interference Without Interference
    25 ● ● 26.18 27.47 Without Interference Without Interference
    30 ● ● 31.41 32.97 Without Interference Without Interference
    40 No Standards ● 100 41.88 Without Interference Without Interference Without Interference
    50 No Standards ● 52.35 Without Interference Without Interference Without Interference

    [ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

    Model Number
    TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

    Outer Diameter
    D    		 Length Under Neck
    ℓ1    		 Shank Diameter
    d    		 Shank Diameter
    d    		 Standard Sharp Edge Flute Length
    ℓ    		 Under Neck Diameter
    d1    		 Overall Length
    L    		 Under Neck Angle
    θ    		 Actual Effective Length Depends on Work Inclination Angle Figure
    30' 1° 2° 3°
    3 8 - 6 ● ● 4.5 2.9 50 10° 8.38 8.79 9.76 10.98 1
    10 No Standards ● 10.47 10.99 12.21 13.73
    12 ● ● 12.57 13.19 14.65 16.48
    14 No Standards ● 70 14.66 15.39 17.09 19.22
    16 ● ● 16.75 17.58 19.53 21.97
    18 No Standards ● 18.85 19.78 21.97 24.71
    20 ● ● 20.94 21.98 24.41 27.46
    25 ● ● 26.18 27.47 30.51 Without Interference
    30 ● ● 31.41 32.97 36.62 Without Interference
    40 ● ● 100 41.88 43.96 Without Interference Without Interference
    45 No Standards ● 47.12 49.45 Without Interference Without Interference
    50 No Standards ● 52.35 54.95 Without Interference Without Interference
    4 12 - 6 ● ● 6 3.8 50 10° 12.57 13.19 14.65 16.48 1
    16 ● ● 16.75 17.58 19.53 Without Interference
    20 ● ● 70 20.94 21.98 24.41 Without Interference
    25 No Standards ● 26.18 27.47 Without Interference Without Interference
    30 ● ● 31.41 32.97 Without Interference Without Interference
    35 No Standards ● 100 36.65 38.46 Without Interference Without Interference
    40 ● ● 41.88 43.96 Without Interference Without Interference
    45 No Standards ● 47.12 49.45 Without Interference Without Interference
    50 No Standards ● 52.35 54.95 Without Interference Without Interference
    5 16 - 6 ● ● 7.5 4.8 70 10° 16.75 17.58 Without Interference Without Interference 1
    20 No Standards ● 20.94 21.98 Without Interference Without Interference
    25 ● ● 26.18 27.47 Without Interference Without Interference
    30 No Standards ● 31.41 Without Interference Without Interference Without Interference
    35 ● ● 100 36.65 Without Interference Without Interference Without Interference
    40 No Standards ● 41.88 Without Interference Without Interference Without Interference
    50 ● ● 52.35 Without Interference Without Interference Without Interference
    6 20 - 6 ● ● 9 5.8 70 10° Without Interference Without Interference Without Interference Without Interference 2
    30 ● ● Without Interference Without Interference Without Interference Without Interference
    40 ● ● 100 Without Interference Without Interference Without Interference Without Interference
    50 ● ● Without Interference Without Interference Without Interference Without Interference
    60 ● ● Without Interference Without Interference Without Interference Without Interference

    [ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

    Model Number
    LN-TSC-PEM2S (Sharp Edge / Manufactured Product) / LN-TSC-EM2S (Standard / Manufactured Product)

    Outer Diameter
    D    		 Length Under Neck ℓ1
    1 mm Increment Designation    		 Shank Diameter
    d    		 Standard Sharp Edge Flute Length
    ℓ    		 Under Neck Diameter
    d1    		 Overall Length
    L    		 Figure
    1.5 8 ~ 20 4 ● ● 3 1.45 40 3
    1.6 9 ~ 20 4 ● ● 3.2 1.55 40 3
    1.8 9 ~ 20 4 ● ● 3.6 1.75 40 3
    2 9 ~ 21 4 ● ● 4 1.95 40 3
    2.5 10 ~ 22 4 ● ● 5 2.4 40 3
    3 11 ~ 21 6 ● ● 6 2.9 45 3
    4 13 ~ 23 6 ● ● 8 3.8 45 3
    5 15 ~ 25 6 ● ● 10 4.8 45 3

    [ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
    (1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number

    Caratteristiche ed esempi di utilizzo

    Più Informazioni


    ● The ideal under-neck length can be selected for workpiece machining in deep areas.
    ● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.


    TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

    Il codice componente è stato confermato