TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

  • Sconto volumi elevati
[Caratteristiche] -L'elevata rigidità è ottenuta grazie all'utilizzo di un raggio negativo e di una lunghezza ridotta del tagliente senza angolo elicoidale, e il chattering è soppresso anche sugli angoli delle tasche -Dal momento che la macchina ha una conicità posteriore, è possibile eseguire la lavorazione senza che il bordo periferico colpisca il lato durante la lavorazione degli angoli -Anche durante la lavorazione del lato inferiore, è possibile utilizzare un'unica macchina dalla finitura intermedia alla finitura finale, ottenendo una riduzione dei tempi di lavorazione.
  • TS
  • High-Hardness Steel
  • 4 Flutes

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade:Related Image

Codice componente
TSC-CR-HFEM4N3-R0.75
TSC-CR-HFEM4N4-R1
TSC-CR-HFEM4N5-R1.2
TSC-CR-HFEM4N6-R1
TSC-CR-HFEM4N6-R1.5
TSC-CR-HFEM4N8-R1
TSC-CR-HFEM4N8-R2
TSC-CR-HFEM4N10-R1
TSC-CR-HFEM4N10-R2
TSC-CR-HFEM4N10-R3
TSC-CR-HFEM4N12-R1
TSC-CR-HFEM4N12-R2
TSC-CR-HFEM4N12-R3
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Outer Diameter (D)
(φ)
R Size
(mm)
Flute Length (ℓ)
(mm)
Overall Length (L)
(mm)
Shank Diameter (d)
(mm)
Length Under Neck (ℓ1)
(mm)
Under Neck Diameter d1
(mm)

51.41 €

1 Disponibile 5 giorni 30.751.26067.52.7

50.93 €

1 Disponibile 5 giorni 411.6706103.6

57.07 €

1 Disponibile 5 giorni 51.22806124.5

57.83 €

1 Disponibile 5 giorni 612.5906125.4

63.35 €

1 Disponibile 5 giorni 61.52.5906125.4

67.78 €

1 Disponibile 5 giorni 813.51008167.2

85.08 €

1 Disponibile 5 giorni 823.51008167.2

97.44 €

1 Disponibile 5 giorni 101410010209

85.77 €

1 Disponibile 5 giorni 102410010209

94.53 €

1 Disponibile 5 giorni 103410010209

113.62 €

1 Disponibile 5 giorni 1215110122411

113.14 €

1 Disponibile 5 giorni 1225110122411

114.92 €

1 Disponibile 5 giorni 1235110122411

Loading...

  1. 1

Specifiche

TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade:Related Image

Model Number     Flute Length
Under Neck Diameter
d1
Length Under Neck
ℓ1
Overall Length
L
Shank Diameter
d
Figure
Outer Diameter
D
Radius R
(Selection)
TSC-CR-HFEM4N 3 0.75           1.2 2.7 7.5 60 6 1
4   1         1.6 3.6 10 70 6 1
5     1.2       2 4.5 12 80 6 1
6   1   1.5     2.5 5.4 12 90 6 2
8   1     2   3.5 7.2 16 100 8 2
10   1     2 3 4 9 20 100 10 2
12   1     2 3 5 11 24 110 12 2


For Cutting Conditions, Refer to >>Click here.

Più Informazioni


It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
Has a negatively sharpened radius and non-twisted short blade length to realize a high rigidity and suppress chatter, even in pocket corners.
Includes a back-taper that enables corners to be machined without the shoulder of the peripheral blade striking side surfaces.
Just the one bit can be used for medium-finishing through to finishing with bottom surface machining, achieving a reduction in processing time.

Informazioni di base

Work Material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / High-Hardness Steel ~ HRC60 / High-Hardness Steel – HRC65 / Acciaio inox / Ghisa Number of Flutes(sheet) 4 Model Raggio elevato avanzamento
Processing Applications Flat Surface / Side Surface / Curved Surface / Inclined Cutting Coating For High Hardness (Silicone-Based) Torsion Angle (θ) Without Torsion
R Precision(μm) ±0.02 Additional Classification Stocked Product

Supporto tecnico