TSC series carbide radius end mill, 3-flute, 45° spiral / short model (TSC-CR-HEM3S8-R0.3)
Fare clic sull'immagine per ingrandirla.
Cliccare sull´immagine per ingrandirla.
- Sconto volumi elevati
Dettagli del prodotto:
Codice articolo del costruttore: TSC-CR-HEM3S8-R0.3
Marca: MISUMI
Prezzo: 62.15 €
Tempi di consegna: 5 giorni
Dati Tecnici:
Outer Diameter (D): 8 φ
R Size: 0.3 mm
Flute Length (ℓ): 19 mm
Overall Length (L): 75 mm
Shank Diameter (d): 8 mm
- TS
- General Steel
- 3 Flutes
- S (Short)
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
TSC-CR-HEM3S8-R0.3
Codice componente
|
|---|
| TSC-CR-HEM3S8-R0.3 |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | Additional Classification | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
62.15 € | 1 | Disponibile | 5 giorni | 8 | 0.3 | 19 | 75 | 8 | - | Stocked Product | 2 |
Loading...
Specifiche
Model Number
TSC-CR-HEM3S (Stocked Product) / T-TSC-HEM3S (Manufactured Product)
| Outer Diameter D |
Radius | R Select (Stocked Product) CR 0.1 mm Increment Designation( Manufactured Product ) |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
| 3 | 0.3 0.5 | 8 | 60 | 6 | 1 | ● | |
| 4 | 0.3 0.5 | 11 | 60 | 6 | 1 | ● | |
| 0.1 ~ 0.4 | □ | ||||||
| 5 | 0.3 0.5 | 13 | 60 | 6 | 1 | ● | |
| 0.1 ~ 0.4 | □ | ||||||
| 6 | 0.3 0.5 1 1.5 | 13 | 60 | 6 | 2 | ● | |
| 0.1 ~ 0.9 | □ | ||||||
| 7 | 0.1 ~ 1.0 | 16 | 70 | 8 | 1 | □ | |
| 7.5 | 0.1 ~ 1.0 | 16 | 70 | 8 | 1 | □ | |
| 8 | 0.3 0.5 1 1.5 | 19 | 75 | 8 | 2 | ● | |
| 0.1 ~ 1.4 | □ | ||||||
| 9 | 0.1 ~ 1.5 | 19 | 80 | 10 | 1 | □ | |
| 10 | 0.3 0.5 1 1.5 2 | 22 | 80 | 10 | 2 | ● | |
| 0.1 ~ 1.9 | □ | ||||||
| 11 | 0.1 ~ 2.0 | 22 | 100 | 12 | 1 | □ | |
| 12 | 0.3 0.5 1 1.5 2 | 26 | 100 | 12 | 2 | ● | |
| 0.1 ~ 2.5 | □ | ||||||
| 16 | 0.1 ~ 3.0 | 32 | 105 | 16 | 2 | □ | |
| 20 | 0.1 ~ 3.0 | 38 | 110 | 20 | 2 | □ | |
[ ! ]The flute length (ℓ) and total length (L) are approximately D x 0.5 shorter (up to approximately 5 mm) for manufactured products.
[ ! ]Manufactured products do not have a coating. Refer to >>Click here. for information about re-coating during additional processing.
For Cutting Conditions, Refer to >>Click here.
Più Informazioni
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● Has a 3-flute shape to be strong against chatter and is capable of stepless grooving.
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth.
● Compared to 30° twisted square end mills, both rotation and feed capacity are more than double for higher speed machining.
Informazioni di base
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Acciaio inox / Ghisa / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 3 | Model | Radius |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Scanalatura / Thrust (Z-Feed) / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
| R Precision(μm) | ±0.01 |
Si trova sulla pagina di TSC series carbide radius end mill, 3-flute, 45° spiral / short model, il codice articolo è il seguente: TSC-CR-HEM3S8-R0.3.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto TSC-CR-HEM3S8-R0.3.
Configura
Proprietà di base
-
Length Under Neck (ℓ1)(mm)
-
Tipo
- SN-TSC-CR-HEM3S
- SNR-TSC-CR-HEM3S
- TSC-CR-HEM3S
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Additional Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 5 giorni o meno
- 7 giorni o meno
- 8 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Tipologia prodotto
| Codice componente |
|---|
| TSC-CR-HEM3S10-R1 |
| TSC-CR-HEM3S10-R1.5 |
| TSC-CR-HEM3S10-R2 |
| TSC-CR-HEM3S8-R0.5 |
| TSC-CR-HEM3S8-R1 |
| TSC-CR-HEM3S8-R1.5 |
| Codice componente | Prezzo unitario standard | Quantità minima d'ordine | Sconto volumi elevati | Giorni spedizione standard ? | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | Additional Classification | Figure |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
81.87 € | 1 | Disponibile | 5 giorni | 10 | 1 | 22 | 80 | 10 | - | Stocked Product | 2 | |
98.06 € | 1 | Disponibile | 5 giorni | 10 | 1.5 | 22 | 80 | 10 | - | Stocked Product | 2 | |
82.36 € | 1 | Disponibile | 5 giorni | 10 | 2 | 22 | 80 | 10 | - | Stocked Product | 2 | |
62.65 € | 1 | Disponibile | 5 giorni | 8 | 0.5 | 19 | 75 | 8 | - | Stocked Product | 2 | |
62.65 € | 1 | Disponibile | 5 giorni | 8 | 1 | 19 | 75 | 8 | - | Stocked Product | 2 | |
67.18 € | 1 | Disponibile | 5 giorni | 8 | 1.5 | 19 | 75 | 8 | - | Stocked Product | 2 |
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.