- Outer Diameter (D)(φ)
- 5
- R Size(mm)
- 1
- Flute Length (ℓ)(mm)
- 21
- Overall Length (L)(mm)
- 60
- Shank Diameter (d)(mm)
- 6
- Additional Classification
- Tipo
- Giorni di spedizione est.
- Tutti
- Entro 5 giorni lavorativi
TSC series carbide radius end mill, 3-flute, 45° spiral / regular model (TSC-CR-HEM3R5-R1)
Disegno schematico
Ulteriori informazioni
Informazioni di base
[Caratteristiche] La forma a 3 eliche la rende resistente al chattering e può essere utilizzata in modo continuativo, dall'affondamento alla scanalatura -L'esclusiva forma della scanalatura del truciolo consente di eseguire scanalature con una profondità di taglio equivalente a quella di 2 eliche -Rispetto alle frese quadrate con angolo d'elica di 30°, la rotazione e l'avanzamento sono più che raddoppiati -L'elica radiale è anche efficace nel sopprimere i trucioli.
Specifiche e prezzo
Specifiche
Model Number
TSC-CR-HEM3R (Stocked Product) / T-TSC-HEM3R (Manufactured Product)
| Outer Diameter D |
Radius | R Select (Stocked Product) | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
| CR 0.1 mm Increment Designation (Manufactured Product) |
|||||||
| 3 | 0.2 0.3 0.5 | 16 | 60 | 6 | 1 | ● | |
| 4 | 0.2 0.3 0.5 1 | 18 | 60 | 6 | 1 | ● | |
| 0.1 ~ 0.4 | □ | ||||||
| 5 | 0.3 0.5 1 | 21 | 60 | 6 | 1 | ● | |
| 0.1 ~ 0.4 | □ | ||||||
| 6 | 0.3 0.5 1 1.5 | 21 | 60 | 6 | 2 | ● | |
| 0.1 ~ 0.9 | □ | ||||||
| 7 | 0.1 ~ 1.0 | 24 | 70 | 8 | 1 | □ | |
| 7.5 | 0.1 ~ 1.0 | 24 | 70 | 8 | 1 | □ | |
| 8 | 0.3 0.5 1 1.5 2 | 26 | 75 | 8 | 2 | ● | |
| 0.1 - 1.4 | □ | ||||||
| 9 | 0.1 ~ 1.5 | 26 | 80 | 10 | 1 | □ | |
| 10 | 0.3 0.5 1 1.5 2 | 34 | 90 | 10 | 2 | ● | |
| 0.1 ~ 1.9 | □ | ||||||
| 11 | 0.1 ~ 2.0 | 34 | 100 | 12 | 1 | □ | |
| 12 | 0.3 0.5 1 1.5 2 | 38 | 100 | 12 | 2 | ● | |
| 0.1 ~ 2.5 | □ | ||||||
| 16 | 0.5 1 | 48 | 110 | 16 | 2 | ● | |
| 0.1 ~ 3.0 | □ | ||||||
| 20 | 0.5 1 | 56 | 130 | 20 | 2 | ● | |
| 0.1 ~ 3.0 | □ | ||||||
[ ! ]The flute length (ℓ) and total length (L) are approximately D x 0.5 shorter (up to approximately 5 mm) for manufactured products.
[ ! ]Manufactured products do not have a coating. Refer to >>Click here. for information about re-coating during additional processing.
For Cutting Conditions, Refer to >>Click here.
Caratteristiche ed esempi di utilizzo
Più Informazioni
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● A multi-functional end mill product with added curvature.
● Has a 3-flute shape to be strong against chatter and is capable of stepless grooving.
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth.
● Compared to 30° twisted square end mills, both rotation and feed capacity are more than double for higher speed machining.
● The radial blade tip is useful to prevent chipping.