• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model (TSC-CR-HEM3LB1-8-R0.2)

TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model TSC-CR-HEM3LB1-8-R0.2

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

  • TSC-CR-HEM3LB
  • LN-TSC-CR-HEM3S
  • Sconto volumi elevati

MISUMI

MISUMI

Dettagli del prodotto:

Codice articolo del costruttore: TSC-CR-HEM3LB1-8-R0.2

Marca: MISUMI

Prezzo: 76.77 €

Tempi di consegna: 5 giorni


Dati Tecnici:

Outer Diameter (D): 1 φ

R Size: 0.2 mm

Work Material: General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[◎] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]

Flute Length (ℓ): 0.8 mm

Number of Flutes: 3 sheet


  • TS
  • General Steel
  • 3 Flutes

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

TSC-CR-HEM3LB1-8-R0.2

TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model:Related Image

Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
TSC-CR-HEM3LB1-8-R0.2
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Outer Diameter (D)
(φ) 		R Size
(mm) 		Work Material Flute Length (ℓ)
(mm) 		Number of Flutes
(sheet) 		Overall Length (L)
(mm) 		Shank Diameter (d)
(mm) 		Length Under Neck (ℓ1)
(mm) 		Processing Applications R Precision
(μm) 		Additional Classification #6 Figure Under Neck Diameter d1
(mm) 		Actual Effective Length Depends on Work Inclination Angle 30'
(mm) 		Actual Effective Length Depends on Work Inclination Angle 1°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 2°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 3°
(mm)

76.77 €

1 Disponibile 5 giorni 10.2General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[◎] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]0.835048Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting±0.005Stocked Product-10.958.388.799.7610.98

Loading...

  1. 1

Specifiche

TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model:Related Image

 Model Number
TSC-CR-HEM3LB (Stocked Product) / LN-TSC-CR-HEM3S (Manufactured Product)

Outer Diameter
D		 Length Under Neck ℓ1
(Manufactured products designated
in 1 mm increment)		 Radius
R		 Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Shank Diameter
d		 Actual Effective Length Depends on Work Inclination Angle Figure ● Stocked Product
□ Manufactured Product
30' 1° 2° 3°
1 6 0.2 0.3 0.8 0.95 50 4 6.28 6.59 7.32 8.24 1 ●
8 8.38 8.79 9.76 10.98 ●
12 12.57 13.19 14.65 16.48 ●
1.5 6 0.2 0.3 1.2 1.45 50 4 6.28 6.59 7.32 8.24 1 ●
8 8.38 8.79 9.76 10.98 ●
12 12.57 13.19 14.65 16.48 ●
2 10 0.2 0.5 1.6 1.95 50 4 10.47 10.99 12.21 13.73 1 ●
12 12.57 13.19 14.65 16.48 ●
14 14.66 15.39 17.09 19.22 ●
16 16.75 17.58 19.53 Without Interference ●
20 70 20.94 21.98 24.41 Without Interference ●
2.5 16 0.2 0.5 2 2.4 70 4 16.75 17.58 19.53 Without Interference 1 ●
20 20.94 21.98 Without Interference Without Interference ●
30 31.41 32.97 Without Interference Without Interference ●
3 16 0.2 0.5 1 2.4 2.9 70 6 16.75 17.58 19.53 21.97 1 ●
20 20.94 21.98 24.41 27.46 ●
30 31.41 32.97 36.62 Without Interference ●
13 ~ 36 0.3 0.5 8 60 - - - - 2 □
4 16 0.2 0.5 1 3.2 3.8 70 6 16.75 17.58 19.53 Without Interference 1 ●
20 20.94 21.98 24.41 Without Interference ●
30 31.41 32.97 Without Interference Without Interference ●
16 ~ 38 0.3 0.5 11 60 - - - - 2 □

[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the points below differ when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number. (3) The order for specifying the "length under neck" and "radius" is the opposite.

For Cutting Conditions, Refer to >>Click here.

Più Informazioni

TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model:Related Image

Informazioni di base

Model Long Neck Radius Coating For High Hardness (Silicone-Based) Torsion Angle (θ) Powerful Helix (45° to 60°)

Si trova sulla pagina di TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model, il codice articolo è il seguente: TSC-CR-HEM3LB1-8-R0.2.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto TSC-CR-HEM3LB1-8-R0.2.

Configura

Ripristina

1Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Work Material

    • General Steel
    • Heat-Treated Steel
    • High-Hardness Steel ~ HRC55
    • High-Hardness Steel ~ HRC60
    • Acciaio inox
    • Ghisa
    • Aluminum Alloy
    • Copper Alloy

    Ripristina

  • Processing Applications

    • Flat Surface
    • Side Surface
    • Curved Surface
    • Scanalatura
    • Inclined Cutting

    Ripristina

  • #6

     

    Ripristina

  • Tipo

    • LN-TSC-CR-HEM3S
    • TSC-CR-HEM3LB

    Ripristina

  • Outer Diameter (D)(φ)

    • 1
    • 1.5
    • 2
    • 2.5
    • 3
    • 4

    Ripristina

  • R Size(mm)

    • 0.2
    • 0.3
    • 0.5
    • 1

    Ripristina

  • Flute Length (ℓ)(mm)

    • 0.8
    • 1.2
    • 1.6
    • 2
    • 2.4
    • 3.2

    Ripristina

  • Number of Flutes(sheet)

    • 3
    • 4

    Ripristina

  • Overall Length (L)(mm)

    • 45
    • 50
    • 70

    Ripristina

  • Shank Diameter (d)(mm)

    • 4
    • 6

    Ripristina

  • Length Under Neck (ℓ1)(mm)

    • 6
    • 8
    • 10
    • 12
    • 14
    • 16
    • 20
    • 30

    Ripristina

  • R Precision(μm)

    • ±0.005
    • ±0.01

    Ripristina

  • Additional Classification

    • Manufactured Product
    • Stocked Product

    Ripristina

Filtrare per giorni di spedizione standard

    • Tutti gli articoli
    • 5 giorni o meno
    • 8 giorni o meno

    Ripristina

Attributi opzionali

Tipologia prodotto

Codice componente
TSC-CR-HEM3LB1-12-R0.2
TSC-CR-HEM3LB1-6-R0.2
TSC-CR-HEM3LB1-6-R0.3
TSC-CR-HEM3LB1-8-R0.3
TSC-CR-HEM3LB1.5-12-R0.2
TSC-CR-HEM3LB1.5-6-R0.2
Codice componentePrezzo unitario standardQuantità minima d'ordineSconto volumi elevatiGiorni
spedizione standard
?		Outer Diameter (D)
(φ) 		R Size
(mm) 		Work Material Flute Length (ℓ)
(mm) 		Number of Flutes
(sheet) 		Overall Length (L)
(mm) 		Shank Diameter (d)
(mm) 		Length Under Neck (ℓ1)
(mm) 		Processing Applications R Precision
(μm) 		Additional Classification #6 Figure Under Neck Diameter d1
(mm) 		Actual Effective Length Depends on Work Inclination Angle 30'
(mm) 		Actual Effective Length Depends on Work Inclination Angle 1°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 2°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 3°
(mm)

76.77 €

1 Disponibile 5 giorni 10.2Copper Alloy[◯] / Aluminum Alloy[◯] / Ghisa[◯] / Acciaio inox[◎] / High-Hardness Steel ~ HRC55[◯] / Heat-Treated Steel[◎] / General Steel[◎]0.8350412Inclined Cutting / Scanalatura / Curved Surface / Side Surface / Flat Surface±0.005Stocked Product-10.9512.5713.1914.6516.48

58.29 €

1 Disponibile 5 giorni 10.2Copper Alloy[◯] / Aluminum Alloy[◯] / Ghisa[◯] / Acciaio inox[◎] / High-Hardness Steel ~ HRC55[◯] / Heat-Treated Steel[◎] / General Steel[◎]0.835046Inclined Cutting / Scanalatura / Curved Surface / Side Surface / Flat Surface±0.005Stocked Product-10.956.286.597.328.24

76.77 €

1 Disponibile 5 giorni 10.3Copper Alloy[◯] / Aluminum Alloy[◯] / Ghisa[◯] / Acciaio inox[◎] / High-Hardness Steel ~ HRC55[◯] / Heat-Treated Steel[◎] / General Steel[◎]0.835046Inclined Cutting / Scanalatura / Curved Surface / Side Surface / Flat Surface±0.005Stocked Product-10.956.286.597.328.24

58.29 €

1 Disponibile 5 giorni 10.3Copper Alloy[◯] / Aluminum Alloy[◯] / Ghisa[◯] / Acciaio inox[◎] / High-Hardness Steel ~ HRC55[◯] / Heat-Treated Steel[◎] / General Steel[◎]0.835048Inclined Cutting / Scanalatura / Curved Surface / Side Surface / Flat Surface±0.005Stocked Product-10.958.388.799.7610.98

79.29 €

1 Disponibile 5 giorni 1.50.2Copper Alloy[◯] / Aluminum Alloy[◯] / Ghisa[◯] / Acciaio inox[◎] / High-Hardness Steel ~ HRC55[◯] / Heat-Treated Steel[◎] / General Steel[◎]1.2350412Inclined Cutting / Scanalatura / Curved Surface / Side Surface / Flat Surface±0.005Stocked Product-11.4512.5713.1914.6516.48

74.50 €

1 Disponibile 5 giorni 1.50.2Copper Alloy[◯] / Aluminum Alloy[◯] / Ghisa[◯] / Acciaio inox[◎] / High-Hardness Steel ~ HRC55[◯] / Heat-Treated Steel[◎] / General Steel[◎]1.235046Inclined Cutting / Scanalatura / Curved Surface / Side Surface / Flat Surface±0.005Stocked Product-11.456.286.597.328.24

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.