TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model (TSC-REM2PB1-1-25-R0.3)
Fare clic sull'immagine per ingrandirla.
Cliccare sull´immagine per ingrandirla.
- Sconto volumi elevati
Dettagli del prodotto:
Codice articolo del costruttore: TSC-REM2PB1-1-25-R0.3
Marca: MISUMI
Prezzo: 82.93 €
Tempi di consegna: 5 giorni
Dati Tecnici:
Outer Diameter (D): 1 φ
R Size: 0.3 mm
Work Material: General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
Flute Length (ℓ): 0.8 mm
Overall Length (L): 70 mm
- TS
- General Steel
- 2 Flutes
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
TSC-REM2PB1-1-25-R0.3
Codice componente
|
|---|
| TSC-REM2PB1-1-25-R0.3 |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Outer Diameter (D) (φ) | R Size (mm) | Work Material | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | R Precision (μm) | Additional Classification | Neck Gradient (Degree) | #6 | #7 | Figure | Under Neck Diameter d1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
82.93 € | 1 | Disponibile | 5 giorni | 1 | 0.3 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○] | 0.8 | 70 | 4 | 25 | ±0.005 | Stocked Product | 1 | - | - | 1 | 1.8 |
Loading...
Specifiche
Model Number
TSC-REM2PB (Stocked Product)
| Outer Diameter D |
Neck Gradient θ1 |
Length Under Neck ℓ1 |
Radius R |
Under Neck Diameter d1 |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure |
| 0.2 | 1° | 1 | 0.05 | 0.22 | 0.16 | 50 | 4 | 1 |
| 2 | 0.26 | |||||||
| 3° | 1 | 0.26 | ||||||
| 2 | 0.37 | |||||||
| 5° | 1 | 0.30 | ||||||
| 2 | 0.48 | |||||||
| 0.3 | 1° | 2 | 0.05 | 0.35 | 0.24 | 50 | 4 | 1 |
| 3 | 0.38 | |||||||
| 3° | 2 | 0.45 | ||||||
| 3 | 0.55 | |||||||
| 5° | 2 | 0.54 | ||||||
| 3 | 0.72 | |||||||
| 0.4 | 1° | 3 | 0.05 0.1 | 0.48 | 0.28 | 50 | 4 | 1 |
| 4 | 0.51 | |||||||
| 3° | 3 | 0.63 | ||||||
| 4 | 0.74 | |||||||
| 5° | 3 | 0.78 | ||||||
| 4 | 0.96 | |||||||
| 0.5 | 1° | 3 | 0.05 0.1 | 0.57 | 0.32 | 50 | 4 | 1 |
| 5 | 0.64 | |||||||
| 8 | 0.74 | |||||||
| 10 | 0.81 | |||||||
| 12 | 0.88 | |||||||
| 3° | 3 | 0.71 | ||||||
| 5 | 0.92 | |||||||
| 8 | 1.23 | |||||||
| 10 | 1.44 | |||||||
| 12 | 1.65 | |||||||
| 5° | 3 | 0.85 | ||||||
| 5 | 1.20 | |||||||
| 8 | 1.72 | |||||||
| 10 | 2.07 | |||||||
| 0.8 | 1° | 5 | 0.05 0.1 0.2 | 0.92 | 0.64 | 50 | 4 | 1 |
| 8 | 1.02 | |||||||
| 3° | 5 | 1.16 | ||||||
| 8 | 1.47 | |||||||
|
1 |
1° | 6 | 0.05 0.1 0.2 0.3 | 1.14 | 0.8 | 50 | 4 | 1 |
| 10 | 1.28 | |||||||
| 15 | 1.45 | |||||||
| 20 | 1.63 | 70 | ||||||
| 25 | 1.80 | |||||||
| 30 | 1.98 | |||||||
| 35 | 2.15 | 100 | ||||||
| 3° | 6 | 1.42 | 50 | |||||
| 10 | 1.84 | |||||||
|
1.5 |
1° | 10 | 0.1 0.2 0.3 | 1.74 | 1.2 | 50 | 4 | 1 |
| 15 | 1.92 | |||||||
| 20 | 2.09 | 70 | ||||||
| 25 | 2.27 | |||||||
| 30 | 2.44 | |||||||
| 3° | 10 | 2.23 | 50 | |||||
| 15 | 2.76 | |||||||
|
2 |
1° | 15 | 0.1 0.2 0.3 0.5 | 2.38 | 1.6 | 50 | 4 | 1 |
| 20 | 2.56 | 70 | ||||||
| 25 | 2.73 | |||||||
| 30 | 2.91 | |||||||
| 40 | 3.26 | 100 | ||||||
| 50 | 3.61 | |||||||
| 3° | 15 | 3.15 | 50 | |||||
| 20 | 3.68 | 70 | ||||||
|
3 |
1° | 15 | 0.2 0.5 | 3.31 | 2.4 | 70 | 6 | 2 |
| 20 | 3.49 | |||||||
| 30 | 3.84 | |||||||
| 40 | 4.19 | 100 | ||||||
| 50 | 4.54 | |||||||
| 60 | 4.89 |
Model Number
TN-TSC-CR-EM2S (Manufactured Product)
| Outer Diameter D |
Radius R |
Neck Gradient θ1 0.5° Increment Designation |
Length Under Neck ℓ1 1 mm Increment Designation |
Under Neck Diameter d1 |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure |
|
1 |
0.1 0.2 0.3 | 2.5° ~ 5° | 7 ~ 19 | - | 2 | 40 | 4 | 2 |
|
1.5 |
0.1 0.2 0.3 | 2.5° ~ 3° | 8 ~ 20 | - | 3 | 40 | 4 | 2 |
| 0.1 0.2 0.3 | 3.5° ~ 5° | 8 ~ 17 | - | |||||
|
2 |
0.1 0.2 0.3 0.5 | 0.5° ~ 3° | 9 ~ 21 | - | 4 | 40 | 4 | 2 |
| 0.1 0.2 0.3 0.5 | 3.5° ~ 5° | 9 ~ 15 | - | |||||
|
3 |
0.1 0.2 0.3 0.5 | 0.5° ~ 5° | 9 ~ 15 | - | 6 | 45 | 6 | 2 |
[ ! ]When ordering manufactured products, be sure to refer to an ordering example as the points below differ from when ordering a stocked product.
(1) "TN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number. (3) The order for specifying the "radius" differs from that of stocked products.
For Cutting Conditions, Refer to >>Click here.
Più Informazioni
● It adopts a short flute length and back-tapered peripheral cutting edge for suppressing chatter.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.
Informazioni di base
| Number of Flutes(sheet) | 2 | Model | Tapered Neck Radius | Processing Applications | Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Standard Helix (30 to 40°) |
Si trova sulla pagina di TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model, il codice articolo è il seguente: TSC-REM2PB1-1-25-R0.3.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto TSC-REM2PB1-1-25-R0.3.
Configura
Proprietà di base
-
Work Material
- General Steel
- Heat-Treated Steel
- High-Hardness Steel ~ HRC55
- Acciaio inox
- Ghisa
- Aluminum Alloy
- Copper Alloy
-
#6
-
#7
-
Tipo
- TN-TSC-CR-EM2S
- TSC-REM2PB
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Length Under Neck (ℓ1)(mm)
-
R Precision(μm)
-
Additional Classification
- Manufactured Product
- Stocked Product
-
Neck Gradient(Degree)
- 1
- 3
- 5
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 5 giorni o meno
- 8 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Tipologia prodotto
| Codice componente |
|---|
| TSC-REM2PB0.3-3-3-R0.05 |
| TSC-REM2PB0.4-1-3-R0.05 |
| TSC-REM2PB0.4-1-4-R0.05 |
| TSC-REM2PB1-1-30-R0.05 |
| TSC-REM2PB1-1-30-R0.3 |
| TSC-REM2PB1-1-35-R0.05 |
| Codice componente | Prezzo unitario standard | Quantità minima d'ordine | Sconto volumi elevati | Giorni spedizione standard ? | Outer Diameter (D) (φ) | R Size (mm) | Work Material | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | R Precision (μm) | Additional Classification | Neck Gradient (Degree) | #6 | #7 | Figure | Under Neck Diameter d1 (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
96.24 € | 1 | Disponibile | 5 giorni | 0.3 | 0.05 | Copper Alloy[◯] / Aluminum Alloy[◯] / Ghisa[◯] / Acciaio inox[◯] / High-Hardness Steel ~ HRC55[◯] / Heat-Treated Steel[◎] / General Steel[◎] | 0.24 | 50 | 4 | 3 | ±0.005 | Stocked Product | 3 | - | - | 1 | 0.55 | |
71.82 € | 1 | Disponibile | 5 giorni | 0.4 | 0.05 | Copper Alloy[◯] / Aluminum Alloy[◯] / Ghisa[◯] / Acciaio inox[◯] / High-Hardness Steel ~ HRC55[◯] / Heat-Treated Steel[◎] / General Steel[◎] | 0.28 | 50 | 4 | 3 | ±0.005 | Stocked Product | 1 | - | - | 1 | 0.48 | |
71.82 € | 1 | Disponibile | 5 giorni | 0.4 | 0.05 | Copper Alloy[◯] / Aluminum Alloy[◯] / Ghisa[◯] / Acciaio inox[◯] / High-Hardness Steel ~ HRC55[◯] / Heat-Treated Steel[◎] / General Steel[◎] | 0.28 | 50 | 4 | 4 | ±0.005 | Stocked Product | 1 | - | - | 1 | 0.51 | |
85.87 € | 1 | Disponibile | 5 giorni | 1 | 0.05 | Copper Alloy[◯] / Aluminum Alloy[◯] / Ghisa[◯] / Acciaio inox[◯] / High-Hardness Steel ~ HRC55[◯] / Heat-Treated Steel[◎] / General Steel[◎] | 0.8 | 70 | 4 | 30 | ±0.005 | Stocked Product | 1 | - | - | 1 | 1.98 | |
85.87 € | 1 | Disponibile | 5 giorni | 1 | 0.3 | Copper Alloy[◯] / Aluminum Alloy[◯] / Ghisa[◯] / Acciaio inox[◯] / High-Hardness Steel ~ HRC55[◯] / Heat-Treated Steel[◎] / General Steel[◎] | 0.8 | 70 | 4 | 30 | ±0.005 | Stocked Product | 1 | - | - | 1 | 1.98 | |
102.15 € | 1 | Disponibile | 5 giorni | 1 | 0.05 | Copper Alloy[◯] / Aluminum Alloy[◯] / Ghisa[◯] / Acciaio inox[◯] / High-Hardness Steel ~ HRC55[◯] / Heat-Treated Steel[◎] / General Steel[◎] | 0.8 | 100 | 4 | 35 | ±0.005 | Stocked Product | 1 | - | - | 1 | 2.15 |
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.