TSC series carbide roughing end mill, fine pitch / long regular model (TSC-LS-RFPR16)
Fare clic sull'immagine per ingrandirla.
Cliccare sull´immagine per ingrandirla.
- Sconto volumi elevati
Dettagli del prodotto:
Codice articolo del costruttore: TSC-LS-RFPR16
Marca: MISUMI
Prezzo: 128.41 €
Tempi di consegna: 5 giorni
Dati Tecnici:
Outer Diameter (D): 16 φ
Flute Length (ℓ): 40 mm
Number of Flutes: 4 sheet
Shank Diameter (d): 16 mm
Overall Length (L): 125 mm
- TS
- General Steel
- R (Regular)
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
TSC-LS-RFPR16
Codice componente
|
|---|
| TSC-LS-RFPR16 |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
128.41 € | 1 | Disponibile | 5 giorni | 16 | 40 | 4 | 16 | 125 | - | Flat Surface / Side Surface / Inclined Cutting | Stocked Product | 2 | ● |
Loading...
Specifiche
| Model Number | Shank Diameter d |
Flute Length ℓ |
Overall Length L |
Number of Flutes | Figure | ||
| Outer Diameter D |
Shank Diameter d |
||||||
| TSC-LS-RFPR | 5 | — | 6 | 15 | 100 | 3 | 1 |
| 6 | — | 6 | 15 | 100 | 3 | 2 | |
| 8 | — | 8 | 20 | 100 | 4 | 2 | |
| 8 | 6 | 6 | 20 | 100 | 4 | 3 | |
| 10 | — | 10 | 25 | 100 | 4 | 2 | |
| 10 | 8 | 8 | 25 | 100 | 4 | 3 | |
| 12 | — | 12 | 30 | 125 | 4 | 2 | |
| 12 | 10 | 10 | 30 | 100 | 4 | 3 | |
| 13 | — | 12 | 30 | 125 | 4 | 3 | |
| 14 | — | 12 | 35 | 125 | 4 | 3 | |
| 16 | — | 16 | 40 | 125 | 4 | 2 | |
| 18 | — | 16 | 45 | 125 | 4 | 2 | |
| 20 | — | 20 | 45 | 150 | 4 | 2 |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.
Più Informazioni
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
● It adopts a fine pitch nick that delivers a finish with good surface roughness after machining.
● The long shank models are ideal for machining deep grooves.
Informazioni di base
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Acciaio inox / Ghisa / Aluminum Alloy / Copper Alloy | Model | Sgrossatura | Coating | For High Hardness (Silicone-Based) |
|---|---|---|---|---|---|
| Geometry | Ultra-Small R | Torsion Angle (θ) | Weak Helix (15 to 25°) | Tolerance of OD(mm) | ±0.06 |
Si trova sulla pagina di TSC series carbide roughing end mill, fine pitch / long regular model, il codice articolo è il seguente: TSC-LS-RFPR16.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto TSC-LS-RFPR16.
Configura
Proprietà di base
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Scanalatura
- Inclined Cutting
-
Tipo
- SN-TSC-LS-RFPR
- TSC-LS-RFPR
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Additional Classification
- Standard Neck Relief
- Stocked Product
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 5 giorni o meno
- 8 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Tipologia prodotto
| Codice componente |
|---|
| TSC-LS-RFPR12-10 |
| TSC-LS-RFPR13 |
| TSC-LS-RFPR14 |
| TSC-LS-RFPR18 |
| TSC-LS-RFPR20 |
| TSC-LS-RFPR5 |
| Codice componente | Prezzo unitario standard | Quantità minima d'ordine | Sconto volumi elevati | Giorni spedizione standard ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
109.80 € | 1 | Disponibile | 5 giorni | 12 | 30 | 4 | 10 | 100 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | 2 | ● | |
163.32 € | 1 | Disponibile | 5 giorni | 13 | 30 | 4 | 12 | 125 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | 3 | ● | |
97.22 € | 1 | Disponibile | 5 giorni | 14 | 35 | 4 | 12 | 125 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | 3 | ● | |
190.08 € | 1 | Disponibile | 5 giorni | 18 | 45 | 4 | 16 | 125 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | 2 | ● | |
191.19 € | 1 | Disponibile | 5 giorni | 20 | 45 | 4 | 20 | 150 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | 2 | ● | |
87.44 € | 1 | Disponibile | 5 giorni | 5 | 15 | 3 | 6 | 100 | - | Inclined Cutting / Scanalatura / Flat Surface / Side Surface | Stocked Product | 1 | ● |
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.