Registrati
Configura
MISUMI

Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
  • Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
  • Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

Codice componente:

Sono stati trovati. 92 candidati non definiti.
    Quantità:

    Disegno schematico

    Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill:Related Image

    Elenco numeri di parte

    Numero di articoli
  • 1
  • 2
  • Successivo
    • Codice componente
    SEC-REM2B4-R[0.1-1/0.1]
    SEC-REM2B4.5-R[0.1-1/0.1]
    SEC-REM2B5-R[0.1-1/0.1]
    SEC-REM2B5.5-R[0.1-1.2/0.1]
    SEC-REM2B6-R[0.1-1.2/0.1]
    SEC-REM2B8-R[0.1-2/0.1]
    SEC-REM2B10-R[0.1-3/0.1]
    SEC-REM2B12-R[0.1-3/0.1]
    SEC-REM2B16-R[0.1-3/0.1]
    SEC-REM2B20-R[0.1-3/0.1]
    SEC-REM2L4-R[0.1-1/0.1]
    SEC-REM2L5-R[0.1-1/0.1]
    SEC-REM2L6-R[0.1-1.2/0.1]
    SEC-REM2L8-R[0.1-2/0.1]
    SEC-REM2L10-R[0.1-3/0.1]
    SEC-REM2L12-R[0.1-3/0.1]
    SEC-REM2R2-R[0.1-0.5/0.1]
    SEC-REM2R2.5-R[0.1-0.5/0.1]
    SEC-REM2R2.8-R[0.1-0.5/0.1]
    SEC-REM2R3-R[0.1-0.7/0.1]
    SEC-REM2R3.5-R[0.1-0.7/0.1]
    SEC-REM2R4-R[0.1-1/0.1]
    SEC-REM2R4.5-R[0.1-1/0.1]
    SEC-REM2R5-R[0.1-1/0.1]
    SEC-REM2R5.5-R[0.1-1.2/0.1]
    SEC-REM2R6-R[0.1-1.2/0.1]
    SEC-REM2R8-R[0.1-2/0.1]
    SEC-REM2R10-R[0.1-3/0.1]
    SEC-REM2R12-R[0.1-3/0.1]
    SEC-REM2R16-R[0.1-3/0.1]
    SEC-REM2R20-R[0.1-3/0.1]
    SEC-REM2RL4-R[0.1-1/0.1]
    SEC-REM2RL5-R[0.1-1/0.1]
    SEC-REM2RL6-R[0.1-1.2/0.1]
    SEC-REM2RL8-R[0.1-2/0.1]
    SEC-REM2RL10-R[0.1-3/0.1]
    SEC-REM2RL12-R[0.1-3/0.1]
    SEC-REM2S2-R[0.1-0.5/0.1]
    SEC-REM2S2.5-R[0.1-0.5/0.1]
    SEC-REM2S2.8-R[0.1-0.5/0.1]
    SEC-REM2S3-R[0.1-0.7/0.1]
    SEC-REM2S3.5-R[0.1-0.7/0.1]
    SEC-REM2S4-R[0.1-1/0.1]
    SEC-REM2S4.5-R[0.1-1/0.1]
    SEC-REM2S5-R[0.1-1/0.1]
    SEC-REM2S5.5-R[0.1-1.2/0.1]
    SEC-REM2S6-R[0.1-1.2/0.1]
    SEC-REM2S8-R[0.1-2/0.1]
    SEC-REM2S10-R[0.1-3/0.1]
    SEC-REM2S12-R[0.1-3/0.1]
    SEC-REM2S16-R[0.1-3/0.1]
    SEC-REM2S20-R[0.1-3/0.1]
    SEC-REM2SR4-R[0.1-1/0.1]
    SEC-REM2SR5-R[0.1-1/0.1]
    SEC-REM2SR6-R[0.1-1.2/0.1]
    SEC-REM2SR8-R[0.1-2/0.1]
    SEC-REM2SR10-R[0.1-3/0.1]
    SEC-REM2SR12-R[0.1-3/0.1]
    SEC-REM4B3-R[0.1-0.7/0.1]
    SEC-REM4B4-R[0.1-1/0.1]

    Outer Diameter (D)

    (φ)

    R Size

    (mm)

    Work Material

    Flute Length (ℓ)

    (mm)

    Number of Flutes

    (sheet)

    Overall Length (L)

    (mm)

    Shank Diameter (d)

    (mm)

    Processing Applications

    Coating

    Figure

    		Quantità minima d'ordine
    4
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    6
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    4.5
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    6.75
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    5
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    7.5
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    5.5
    0.1 ～ 1.2
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    8.25
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    6
    0.1 ～ 1.2
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    9
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    8
    0.1 ～ 2
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    12
    2
    60
    8
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    10
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    15
    2
    70
    10
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    12
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    18
    2
    75
    12
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    16
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    24
    2
    100
    16
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    20
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    30
    2
    105
    20
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    4
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    16
    2
    60
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    5
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    20
    2
    60
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    6
    0.1 ～ 1.2
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    24
    2
    60
    10
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    8
    0.1 ～ 2
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    32
    2
    100
    8
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    10
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    40
    2
    100
    10
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    12
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    48
    2
    100
    12
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    2
    0.1 ～ 0.5
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    6
    2
    45
    4
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    2.5
    0.1 ～ 0.5
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    7.5
    2
    45
    4
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    2.8
    0.1 ～ 0.5
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    8.4
    2
    45
    4
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    3
    0.1 ～ 0.7
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    9
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    3.5
    0.1 ～ 0.7
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    10.5
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    4
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    12
    2
    50
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    4.5
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    13.5
    2
    50
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    5
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    15
    2
    55
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    5.5
    0.1 ～ 1.2
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    16.5
    2
    55
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    6
    0.1 ～ 1.2
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    18
    2
    60
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    8
    0.1 ～ 2
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    24
    2
    70
    8
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    10
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    30
    2
    80
    10
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    12
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    36
    2
    85
    12
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    16
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    48
    2
    115
    16
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    20
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    60
    2
    125
    20
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    4
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    14
    2
    50
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    5
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    17.5
    2
    55
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    6
    0.1 ～ 1.2
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    21
    2
    60
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    8
    0.1 ～ 2
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    28
    2
    70
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    10
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    35
    2
    80
    10
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    12
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    42
    2
    95
    12
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    2
    0.1 ～ 0.5
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    4
    2
    40
    4
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    2.5
    0.1 ～ 0.5
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    5
    2
    40
    4
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    2.8
    0.1 ～ 0.5
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    5.6
    2
    40
    4
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    3
    0.1 ～ 0.7
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    6
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    3.5
    0.1 ～ 0.7
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    7
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    4
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    8
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    4.5
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    9
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    5
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    10
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    5.5
    0.1 ～ 1.2
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    11
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    6
    0.1 ～ 1.2
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    12
    2
    45
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    8
    0.1 ～ 2
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    16
    2
    55
    8
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    10
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    20
    2
    65
    10
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    12
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    24
    2
    75
    12
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    16
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    32
    2
    100
    16
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    20
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    40
    2
    105
    20
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    4
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    10
    2
    50
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    5
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    12.5
    2
    55
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    6
    0.1 ～ 1.2
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    15
    2
    60
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    8
    0.1 ～ 2
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    20
    2
    70
    6
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    10
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    25
    2
    80
    10
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    12
    0.1 ～ 3
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    30
    2
    85
    12
    Flat Surface / Side Surface / Curved Surface / Scanalatura / Inclined Cutting
    Senza rivestimento
    2
    1 pezzi
    3
    0.1 ～ 0.7
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    4.5
    4
    45
    6
    Flat Surface / Side Surface / Curved Surface / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    4
    0.1 ～ 1
    General Steel[◎] / Heat-Treated Steel[○] / Acciaio inox[○] / Ghisa[○] / Aluminum Alloy[○] / Copper Alloy[○]
    6
    4
    45
    6
    Flat Surface / Side Surface / Curved Surface / Inclined Cutting
    Senza rivestimento
    1
    1 pezzi
    Prezzo unitario (IVA esclusa)(Prezzo unitario IVA inclusa)
    Giorni spedizione standard
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
    -
    ( - )
    7 giorni lavorativi
  • 1
  • 2
  • Successivo

    • Ulteriori informazioni

    Informazioni di base

    [Caratteristiche] Fresa ad alterazione che può determinare il raggio della fresa in metallo duro con incrementi di 0,1 mm Può essere riaffilata. Per informazioni su possibili applicazioni, gamma di servizi, prezzi, ecc. consultare la pagina "Servizio di riaffilatura".

    Specifiche e prezzo

    Specifiche

    Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill:Related Image


    Model Number
    SEC-REM2B / TSC-REM2B
    SEC-REM4B     / TSC-REM4B (1.5 D Blade Length Type)
    Flute Diameter
    D    		Corner R
    0.1 mm Increment Designation    		Blade Length
    ℓ    		Overall Length
    L    		Shank Diameter
    d    		Figure
    30.1 ~ 0.74.54561
    3.50.1 ~ 0.75.254561
    40.1 ~ 1.064561
    4.50.1 ~ 1.06.754561
    50.1 ~ 1.07.54561
    5.50.1 ~ 1.08.254561
    60.1 ~ 1.294562
    80.1 ~ 2.0126082
    100.1 ~ 3.01570102
    120.1 ~ 3.01875122
    160.1 ~ 3.024100162
    200.1 ~ 3.030105202

    Model Number
    SEC-REM2S / TSC-REM2S
    SEC-REM4S     / TSC-REM4S (2 D Blade Length Type)
    Flute Diameter
    D    		Corner R
    0.1 mm Increment Designation    		Blade Length
    ℓ    		Overall Length
    L    		Shank Diameter
    d    		Figure
    20.1 ~ 0.544041
    2.50.1 ~ 0.554041
    2.80.1 ~ 0.55.64041
    30.1 ~ 0.764561
    3.50.1 ~ 0.774561
    40.1 ~ 1.084561
    4.50.1 ~ 1.094561
    50.1 ~ 1.0104561
    5.50.1 ~ 1.0114561
    60.1 ~ 1.2124562
    80.1 ~ 2.0165582
    100.1 ~ 3.02065102
    120.1 ~ 3.02475122
    160.1 ~ 3.032100162
    200.1 ~ 3.040105202

    Model Number
    SEC-REM2SR / TSC-REM2SR (2.5 D Blade Length Type)
     * There is no standard for 4 flutes.iece
    1 Piece Unit
    Flute Diameter
    D    		Corner R
    0.1 mm Increment Designation    		Blade Length
    ℓ    		Overall Length
    L    		Shank Diameter
    d    		Figure
    30.1 ~ 0.77.54561
    40.1 ~ 1.0105061
    50.1 ~ 1.012.55561
    60.1 ~ 1.2156062
    80.1 ~ 2.0207082
    100.1 ~ 3.02580102
    120.1 ~ 3.03085122

    Model Number
    SEC-REM2R / TSC-REM2R
    SEC-REM4R     / TSC-REM4R (3 D Blade Length Type)
    Flute Diameter
    D    		Corner R
    0.1 mm Increment Designation    		Blade Length
    ℓ    		Overall Length
    L    		Shank Diameter
    d    		Figure
    20.1 ~ 0.564541
    2.50.1 ~ 0.57.54541
    2.80.1 ~ 0.58.44541
    30.1 ~ 0.794561
    3.50.1 ~ 0.710.54561
    40.1 ~ 1.0125061
    4.50.1 ~ 1.013.55061
    50.1 ~ 1.0155561
    5.50.1 ~ 1.016.55561
    60.1 ~ 1.2186062
    80.1 ~ 2.0247082
    100.1 ~ 3.03080102
    120.1 ~ 3.03685122
    160.1 ~ 3.048115162
    200.1 ~ 3.060125202

    Model Number
    SEC-REM2RL / TSC-REM2RL (3.5 D Blade Length Type)
     * There is no standard for 4 flutes.
    1 Piece Unit
    Flute Diameter
    D    		Corner R
    0.1 mm Increment Designation    		Blade Length
    ℓ    		Overall Length
    L    		Shank Diameter
    d    		Figure
    30.1 ~ 0.710.54561
    40.1 ~ 1.0145061
    50.1 ~ 1.017.55561
    60.1 ~ 1.2216062
    80.1 ~ 2.0287082
    100.1 ~ 3.03580102
    120.1 ~ 3.04295122

    Model Number
    SEC-REM2L / TSC-REM2L (4 D Blade Length Type) 
    * There is no standard for 4 flutes.
    1 Piece Unit
    Flute Diameter
    D    		Corner R
    0.1 mm Increment Designation    		Blade Length
    ℓ    		Overall Length
    L    		Shank Diameter
    d    		Figure
    30.1 ~ 0.7125061
    40.1 ~ 1.0166061
    50.1 ~ 1.0206061
    60.1 ~ 1.2246062
    80.1 ~ 2.03210082
    100.1 ~ 3.040100102
    120.1 ~ 3.048100122


    For Cutting Conditions, Refer to >>Click here.