Utilizziamo i cookie per offrire un'esperienza più confortevole nel nostro online shop

Ad esempio, possiamo mostrarvi consigli personalizzati sui prodotti e offrire le migliori funzioni di servizio possibili nel processo di ordinazione. Potete gestire in qualsiasi momento le impostazioni dei vostri cookie sotto condizione sulla privacy.

  • A causa di un errore di sistema temporaneo, le informazioni di tracciamento visualizzate nel sistema ordini online sono attualmente errate.Può utilizzare il numero di tracciamento visualizzato come segue. Per le spedizioni in Germania, utilizzi il link GLS. Per le spedizioni in tutti gli altri paesi europei, utilizzi il link TNT / FedEX. Ci scusiamo per l'inconveniente.
  • Notifica importante: COVID-19 ha aumentato enormemente i nostri costi d´importazione in Europa. Ne consegue che, a partire dal 01. Maggio 2020 verrà temporaneamente applicato un sovrapprezzo di 11,50EUR alle normali spese di spedizione. Ulteriori informazioni qui.
  • Lavori di manutenzione: questa pagina non sarà disponibile dalle ore 2:00 24/1/2021 alle ore 0:00 (CET) 25/1/2021 per lavori di manutenzione al server. Ci scusiamo per questo inconveniente.

Cutting Fiber

Cutting Fiber
  • Sconto volumi elevati

Ideal for automation of fine deburring

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Cutting Fiber:Related Image
Codice componente
CFM-B-1
CFM-B-2
CFM-B-3
CFM-B-4
CFM-B-5
CFM-B-6
CFM-B-7
CFM-B-8
CFM-B-HP-3
CFM-B-HP-15
CFM-B-R60
CFM-B-R100
CFM-B-W60
CFM-S-2
CFM-S-4
CFM-S-60
CFM-S-100
Codice componentePrezzo unitario standardSconto volumi elevatiGiorni spedizione?Diameter D1
(mm)
Product Model Wire Model Shaft Diameter D2
(mm)
Sleeve Diameter D3
(mm)
Total Length L2
(mm)
Shaft Length L3
(mm)
Wire Length L1 Compatible Sleeve

194.92 €

Disponibile 4 giorni 40Cap ModelRed----75CFM-S-1

122.88 €

Disponibile 4 giorni 25Cap ModelRed----75CFM-S-2

73.86 €

Disponibile 4 giorni 15Cap ModelRed----50CFM-S-3

31.97 €

Disponibile 4 giorni 6Cap ModelRed----30CFM-S-4

194.92 €

Disponibile 4 giorni 40Cap ModelWhite----75CFM-S-1

122.88 €

Disponibile 4 giorni 25Cap ModelWhite----75CFM-S-2

73.86 €

Disponibile 4 giorni 15Cap ModelWhite----50CFM-S-3

31.97 €

Disponibile 4 giorni 6Cap ModelWhite----30CFM-S-4

25.63 €

Disponibile 5 giorni 3Cap ModelPink----30-

108.09 €

Disponibile 5 giorni 15Cap ModelPink----50CFM-S-3

322.03 €

Disponibile 5 giorni 60Cap ModelRed----75CFM-S-60

576.27 €

Disponibile 5 giorni 100Cap ModelRed----75CFM-S-100

322.03 €

Disponibile 5 giorni 60Cap ModelWhite----75CFM-S-60

108.04 €

Disponibile 4 giorni -Sleeve-83014030--

28.77 €

Disponibile 4 giorni -Sleeve-6107029--

254.24 €

Disponibile 5 giorni -Sleeve-126515035--

406.78 €

Disponibile 5 giorni -Sleeve-1611016240--

Loading...

  1. 1

Specifiche

Cutting Fiber:Related Image
● Brush
Model NumberNo.Wire TypeDiameter
D1
Wire Length
L1
Compatible Sleeve● Stocked Item
□ Non-Stocked Item
CFM−BR100Red10075CFM−S−100
R 6060CFM−S−60
140CFM−S−1
225CFM−S−2
31550CFM−S−3
4630CFM−S−4
W100White10075CFM−S−100
W 6060CFM−S−60
540CFM−S−1
625CFM−S−2
71550CFM−S−3
8630CFM−S−4
CFM−B−HP
15Pink1550CFM−S−3
3330

[ ! ] The brush is used with a sleeve as a set.

● Sleeve
Model NumberNo.Shaft Diameter
D2
Sleeve Diameter
D3
Total Length
L2
Shaft Length
L3
● Stocked Item
□ Non-Stocked Item
CFM−S1001611016240
60126515035
184514030
283014030
36189029
46107029

Più Informazioni

■ Usage
● Efficiently removing extremely fine burrs produced after machining with a base thickness of 0.1 mm or less.
 ● It is suitable for machining with a machining center, dedicated machine or drilling machine and enables easy automation.
 ● It is ideal for surface grinding and removing extremely fine burrs on parts of cars, aircrafts and machines.
 ● It greatly improves surface roughness in a short time to reduce the time taken for the polishing process.


A brush wire is used instead of a ceramic fiber stick grindstone.
The wire tip has excellent cutting ability.
The wire will not spread as it is used.

■ About the wire
● The white is thick, durable and excellent in cutting properties. For hard ferrous work materials.
● The red is thinner than the white, with excellent fitting and is suitable for removing extremely fine burrs. For free-cutting material.
● The pink is the softest and only removes burrs while preventing edge undercut.

■ Operating Precautions
[Maximum operating rotation speed]
● It is dangerous to exceed the maximum operating rotation speed since the brush may break.
[Cut Depth / Cutting Load]
● It is not efficient and also shortens the life of the brush due to rapid wire abrasion if the product is used with an excessive cut depth or cutting load.
● It is most effective to cut material at the wire tip.
[Adjusting Wire Protrusion Amount]
● Use it after adjusting flexibility and traceability by mounting a sleeve (outer cylinder part) to the outer circumference of the brush body to adjust the wire protrusion amount from the sleeve. Flexibility and traceability improve with an increased protrusion amount and worsen with a decreased protrusion amount. It is dangerous to exceed the protrusion amount since the brush may break.
[Hair Length]
● When the total length of the wire (hair length) is shortened as you use the product, its cutting ability tends to increase and its fitting tends to decrease. Therefore, adjust its cutting ability and fitting by reducing the rotation speed / cut depth.
[Dry / Wet Machining]
● Both dry and wet machining are possible. Wet machining has a slightly better cutting ability. Collect the dust generated with dry machining with a device such as a dust collector.

■ How to Use (Recommended Machining Conditions for Removing Extremely Fine Burrs)
Diameter
D1
Maximum Operating
Rotation Speed
(min-1)
Feed
(mm/min)
Cut Depth
(mm)
Brush Protrusion Amount
(mm)
1001,2002,400
(When Removing Burrs)

1,000
(When Polishing)
1.0
(Hard Material such as Iron)

0.5
(Soft Material such as Aluminum)
15
602,000
403,000
255,000
156,00010
610,0005


 * Test at 80% of the maximum operation rotation speed.
 * Feed speed is in inverse proportion to cutting ability. When the feed is doubled, the cutting amount will be decreased by half.
 * Use a float holder (P.983) for more stable machining.

Cutting Fiber:Related Image

Esempio di utilizzo

Cutting Fiber:Related Image

Cutting Fiber:Related Image

Informazioni di base

Product Model Tipo automatico Commodity Contents Spazzola

Ulteriori prodotti in questa categoria

Supporto tecnico