Homepage MISUMI
Utensili da taglio
Frese al carburo
Frese al carburo a testa quadrata
Frese a testa quadrata con stelo lungo (al carburo)
XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model(Elenco numeri di parte: 2 pagina)

Configura

Outer Diameter (D)(φ)
- 1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 2
- 2.5
- 3
- 3.5
- 4
- 5
- 6
Flute Length (ℓ)(mm)
- 1.5
- 1.8
- 1.9
- 2.1
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3.8
- 4.5
- 5.5
- 6
- 7.5
- 9
Shank Diameter (d)(mm)
- 4
- 6
Overall Length (L)(mm)
- 50
- 70
- 100
Length Under Neck (ℓ1)(mm)
- 4
- 6
- 8
- 10
- 12
- 14
- 16
- 18
- 20
- 25
- 30
- 35
- 40
- 45
- 50
Geometry
- Sharp Corner
Tipo
- XAL-PEM4LB
Giorni di spedizione est.
- Tutti
- Entro 5 giorni lavorativi

MISUMI

XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model(Elenco numeri di parte: 2 pagina)

Codice componente:

Sono stati trovati. 80 candidati non definiti.

Disegno schematico
Elenco numeri di parte
Ulteriori informazioni

Disegno schematico

XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model:Related Image

Elenco numeri di parte

Numero di articoli

Codice componente

Outer Diameter (D)

(φ)

Flute Length (ℓ)

(mm)

Shank Diameter (d)

(mm)

Overall Length (L)

(mm)

Length Under Neck (ℓ1)

(mm)

Geometry

Figure

Under Neck Diameter d1

(mm)

Actual Effective Length Depends on Work Inclination Angle 30'

(mm)

Actual Effective Length Depends on Work Inclination Angle 1°

(mm)

Actual Effective Length Depends on Work Inclination Angle 2°

(mm)

Actual Effective Length Depends on Work Inclination Angle 3°

(mm)

Quantità minima d'ordine

3	4.5	6	100	40	Sharp Corner	1	2.9	41.88	43.96	Without Interference	Without Interference	1 pezzi
3.5	5.5	6	70	16	Sharp Corner	1	3.35	16.75	17.58	19.53	21.97	1 pezzi
3.5	5.5	6	70	25	Sharp Corner	1	3.35	26.18	27.47	30.51	Without Interference	1 pezzi
3.5	5.5	6	100	35	Sharp Corner	1	3.35	36.65	38.46	Without Interference	Without Interference	1 pezzi
4	6	6	50	12	Sharp Corner	1	3.8	12.57	13.19	14.65	16.48	1 pezzi
4	6	6	50	16	Sharp Corner	1	3.8	16.75	17.58	19.53	Without Interference	1 pezzi
4	6	6	70	20	Sharp Corner	1	3.8	20.94	21.98	24.41	Without Interference	1 pezzi
4	6	6	70	30	Sharp Corner	1	3.8	31.41	32.97	Without Interference	Without Interference	1 pezzi
4	6	6	100	35	Sharp Corner	1	3.8	36.65	38.46	Without Interference	Without Interference	1 pezzi
4	6	6	100	40	Sharp Corner	1	3.8	41.88	43.96	Without Interference	Without Interference	1 pezzi
4	6	6	100	45	Sharp Corner	1	3.8	47.12	49.45	Without Interference	Without Interference	1 pezzi
4	6	6	100	50	Sharp Corner	1	3.8	52.35	54.95	Without Interference	Without Interference	1 pezzi
5	7.5	6	70	16	Sharp Corner	1	4.8	16.75	17.58	Without Interference	Without Interference	1 pezzi
5	7.5	6	70	25	Sharp Corner	1	4.8	26.18	27.47	Without Interference	Without Interference	1 pezzi
5	7.5	6	100	35	Sharp Corner	1	4.8	36.65	Without Interference	Without Interference	Without Interference	1 pezzi
5	7.5	6	100	50	Sharp Corner	1	4.8	52.35	Without Interference	Without Interference	Without Interference	1 pezzi
6	9	6	70	20	Sharp Corner	2	5.8	Without Interference	Without Interference	Without Interference	Without Interference	1 pezzi
6	9	6	70	30	Sharp Corner	2	5.8	Without Interference	Without Interference	Without Interference	Without Interference	1 pezzi
6	9	6	100	40	Sharp Corner	2	5.8	Without Interference	Without Interference	Without Interference	Without Interference	1 pezzi
6	9	6	100	50	Sharp Corner	2	5.8	Without Interference	Without Interference	Without Interference	Without Interference	1 pezzi

Prezzo unitario (IVA esclusa)(Prezzo unitario IVA inclusa)	Giorni spedizione standard

35.87 € ( 42.69 € )	5 giorni lavorativi
31.36 € ( 37.32 € )	5 giorni lavorativi
28.61 € ( 34.05 € )	5 giorni lavorativi
28.73 € ( 34.19 € )	5 giorni lavorativi
28.52 € ( 33.94 € )	5 giorni lavorativi
28.52 € ( 33.94 € )	5 giorni lavorativi
28.61 € ( 34.05 € )	5 giorni lavorativi
28.61 € ( 34.05 € )	5 giorni lavorativi
28.73 € ( 34.19 € )	5 giorni lavorativi
36.23 € ( 43.11 € )	5 giorni lavorativi
43.49 € ( 51.75 € )	5 giorni lavorativi
54.29 € ( 64.61 € )	5 giorni lavorativi
36.10 € ( 42.96 € )	5 giorni lavorativi
36.10 € ( 42.96 € )	5 giorni lavorativi
36.23 € ( 43.11 € )	5 giorni lavorativi
54.29 € ( 64.61 € )	5 giorni lavorativi
36.10 € ( 42.96 € )	5 giorni lavorativi
36.10 € ( 42.96 € )	5 giorni lavorativi
43.49 € ( 51.75 € )	5 giorni lavorativi
54.29 € ( 64.61 € )	5 giorni lavorativi

Informazioni di base

The price that's only achievable by XAL Series! Introducing the 4-flute long neck

Specifiche e prezzo

Specifiche

Model Number
XAL-PEM4LB (Sharp Edge) / XAL-EM4LB (Standard)

Flute Diameter D	Length Under Neck ℓ1	Standard	Sharp Edge	Blade Length ℓ	Under Neck Diameter d1	Overall Length L	Shank Diameter d	Actual Effective Length Depends on Work Inclination Angle				Figure
Flute Diameter D	Length Under Neck ℓ1	Standard	Sharp Edge	Blade Length ℓ	Under Neck Diameter d1	Overall Length L	Shank Diameter d	30′	1°	2°	3°	Figure
1	4	●	●	1.5	0.95	50	4	4.19	4.4	4.88	5.49	1
	6	●	●					6.28	6.59	7.32	8.24
	8	●	●					8.38	8.79	9.76	10.98
	10	●	●					10.47	10.99	12.21	13.73
	12	●	●					12.57	13.19	14.65	16.48
1.2	6	●	●	1.8	1.15	50	4	6.28	6.59	7.32	8.24	1
	8	●	●					8.38	8.79	9.76	10.98
	10	●	●					10.47	10.99	12.21	13.73
	12	●	●					12.57	13.19	14.65	16.48
	16	●	●					16.75	17.58	19.53	21.97
1.3	6	No Standards	●	1.9	1.25	50	4	6.28	6.59	7.32	8.24	1
1.3	10	No Standards	●	1.9	1.25	50	4	10.47	10.99	12.21	13.73	1
1.4	6	No Standards	●	2.1	1.35	50	4	6.28	6.59	7.32	8.24	1
	8	No Standards	●					8.38	8.79	9.76	10.98
	10	No Standards	●					10.47	10.99	12.21	13.73
	14	No Standards	●					14.66	15.39	17.09	19.22
1.5	6	●	●	2.3	1.45	50	4	6.28	6.59	7.32	8.24	1
	8	●	●					8.38	8.79	9.76	10.98
	10	●	●					10.47	10.99	12.21	13.73
	12	●	●					12.57	13.19	14.65	16.48
	14	●	●					14.66	15.39	17.09	19.22
	16	●	●					16.75	17.58	19.53	21.97
	18	●	●			70		18.85	19.78	21.97	24.71
	20	●	●			70		20.94	21.98	24.41	Without Interference
1.6	6	No Standards	●	2.4	1.55	50	4	6.28	6.59	7.32	8.24	1
	8	No Standards	●					8.38	8.79	9.76	10.98
	10	No Standards	●					10.47	10.99	12.21	13.73
	12	No Standards	●					12.57	13.19	14.65	16.48
	14	No Standards	●					14.66	15.39	17.09	19.22
1.7	6	No Standards	●	2.5	1.65	50	4	6.28	6.59	7.32	8.24	1
1.7	16	No Standards	●	2.5	1.65	50	4	16.75	17.58	19.53	21.97	1
1.8	6	No Standards	●	2.7	1.75	50	4	6.28	6.59	7.32	8.24	1
	8	No Standards	●					8.38	8.79	9.76	10.98
	10	No Standards	●					10.47	10.99	12.21	13.73
	12	No Standards	●					12.57	13.19	14.65	16.48
	14	No Standards	●					14.66	15.39	17.09	19.22
	16	No Standards	●					16.75	17.58	19.53	Without Interference
	20	No Standards	●			70		20.94	21.98	24.41	Without Interference
	25	No Standards	●			70		26.18	27.47	30.51	Without Interference
2	6	●	●	3	1.95	50	4	6.28	6.59	7.32	8.24	1
	8	●	●					8.38	8.79	9.76	10.98
	10	●	●					10.47	10.99	12.21	13.73
	12	●	●					12.57	13.19	14.65	16.48
	14	●	●					14.66	15.39	17.09	19.22
	16	●	●					16.75	17.58	19.53	Without Interference
	18	●	●			70		18.85	19.78	21.97	Without Interference
	20	●	●					20.94	21.98	24.41	Without Interference
	25	●	●					26.18	27.47	Without Interference	Without Interference
	30	●	●					31.41	32.97	Without Interference	Without Interference
2.5	8	●	●	3.8	2.4	50	4	8.38	8.79	9.76	10.98	1
	12	●	●					12.57	13.19	14.65	Without Interference
	16	●	●					16.75	17.58	19.53	Without Interference
	20	●	●			70		20.94	21.98	Without Interference	Without Interference
	25	●	●			70		26.18	27.47	Without Interference	Without Interference
3	8	No Standards	●	4.5	2.9	50	6	8.38	8.79	9.76	10.98	1
	12	●	●			50		12.57	13.19	14.65	16.48
	16	●	●			70		16.75	17.58	19.53	21.97
	20	●	●					20.94	21.98	24.41	27.46
	25	●	●					26.18	27.47	30.51	Without Interference
	30	●	●					31.41	32.97	36.62	Without Interference
	40	●	●			100		41.88	43.96	Without Interference	Without Interference
3.5	16	No Standards	●	5.5	3.35	70	6	16.75	17.58	19.53	21.97	1
	25	No Standards	●			70		26.18	27.47	30.51	Without Interference
	35	No Standards	●			100		36.65	38.46	Without Interference	Without Interference
4	12	No Standards	●	6	3.8	50	6	12.57	13.19	14.65	16.48	1
	16	●	●			50		16.75	17.58	19.53	Without Interference
	20	●	●			70		20.94	21.98	24.41	Without Interference
	30	●	●			70		31.41	32.97	Without Interference	Without Interference
	35	No Standards	●			100		36.65	38.46	Without Interference	Without Interference
	40	●	●					41.88	43.96	Without Interference	Without Interference
	45	No Standards	●					47.12	49.45	Without Interference	Without Interference
	50	No Standards	●					52.35	54.95	Without Interference	Without Interference
5	16	●	●	7.5	4.8	70	6	16.75	17.58	Without Interference	Without Interference	1
	25	●	●			70		26.18	27.47	Without Interference	Without Interference
	35	●	●			100		36.65	Without Interference	Without Interference	Without Interference
	50	●	●			100		52.35	Without Interference	Without Interference	Without Interference
6	20	●	●	9	5.8	70	6	Without Interference	Without Interference	Without Interference	Without Interference	2
	30	●	●			70		Without Interference	Without Interference	Without Interference	Without Interference
	40	●	●			100		Without Interference	Without Interference	Without Interference	Without Interference
	50	●	●			100		Without Interference	Without Interference	Without Interference	Without Interference

Caratteristiche ed esempi di utilizzo

Più Informazioni

● The ideal length under neck can be selected for workpiece machining in deep areas.
● The XAL coating with excellent lubricity delivers stable wear-resistant performance, especially when milling mild steel, giving improved shape accuracy to the machined objects.

[ ! ]The XAL coating does not have conductive properties. Cannot be used with conduction model tool setters.

XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model:Related Image

[ ! ]The actual effective length is a guideline. Confirm the actual measurement if concerned about interference with the workpiece.