• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Boccole a strisciamento / con collare / plastica (iglidur) / XFM (Codici componente - Download CAD)

Boccole a strisciamento / con collare / plastica (iglidur) / XFM
  • In Offerta fino al 31/12/2024
  • Sconto volumi elevati

IGUS

IGUS

iglidur® X is defined by its combination of high temperature resistance with compressive strength, along with high resistance to chemicals. iglidur® X is designed for higher speeds than other iglidur® bearings.

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

iglidur® X | The Chemical and Temperature Specialist, Flange Bearing (Form F)

Product Information


Up to 150 MPa static
iglidur® X is defined by its combination of high temperature resistance with compressive strength, along with high resistance to chemicals. iglidur® X is designed for higher speeds than other iglidur® bearings.
When to use it?
• For pressure loads up to 150 MPa
• For linear movements with stainless steel at high temperatures
• Universal resistance to chemicals
• Temperature resistant from –100 °C to +250 °C in continuous operation (short-term to +315 °C)
• Very low moisture absorption
• High wear resistance over the entire temperature range
When not to use it?
• For very low wear at high loads
   ►iglidur® Q
   ►iglidur® Z
• For economical underwater applications
   ►iglidur® H
   ►iglidur® H370
• For edge pressure
   ►iglidur® Z
Typical application areas
• Beverage technology
• Woodworking
• Plastic processing industry
• Aerospace engineering
• Cleanroom

Material Properties

General propertiesUnitiglidur® XTesting method
Densityg/cm31.44 
Colour black 
Max. moisture absorption at +23 °C/50 % r.h.% weight0.1DIN 53495
Max. water absorption% weight0.5 
Coefficient of sliding friction, dynamic, against steelμ0.09–0.27 
pv value, max. (dry)MPa · m/s1.32 
Mechanical properties
Flexural modulusMPa8,100DIN 53457
Flexural strength at +20 °CMPa170DIN 53452
Compressive strengthMPa100 
Max. recommended surface pressure (+20 °C)MPa150 
Shore-D hardness 85DIN 53505
Physical and thermal properties
Max. long-term application temperature°C+250 
Max. short-term application temperature°C+315 
Min. long-term application temperature°C–100 
Heat conductivityW/m · K0.6ASTM C 177
Coefficient of thermal expansion (at +23 °C)K–1 · 10–55DIN 53752
Electrical properties5)
Specific contact resistanceΩcm< 105DIN IEC 93
Surface resistanceΩ< 103DIN 53482
5) The good conductivity of this plastic material under certain circumstances can favour the generation of corrosion on the metallic contact components.

Dimensions

Flange Bearing (Form F)

2) Thickness < 1 mm: chamfer = 20°
 
Chamfer in relation to the d1
d1 [mm]:Ø 1–6Ø 6–12Ø 12–30Ø > 30
f [mm]:0.30.50.81.2



Dimensions [mm]
d1d1-d2d3b1b2Part No.
 Tolerance3) d13h13–0.14 
2.0+0.006
+0.046		4.06.03.01.0XFM-020406-03
3.04.57.55.00.75XFM-0304-05
4.0+0.010
+0.058		5.59.54.00.75XFM-0405-04
4.05.59.56.00.75XFM-0405-06
4.05.58.06.00.75XFM-040508-06
5.07.011.05.01.0XFM-0507-05
6.08.012.04.01.0XFM-0608-04
6.08.012.08.01.0XFM-0608-08
6.08.012.010.01.0XFM-0608-10
8.0+0.013
+0.071		10.015.05.51.0XFM-0810-05
8.010.015.07.51.0XFM-0810-07
8.010.015.08.01.0XFM-0810-08
8.010.015.09.01.0XFM-0810-09
8.010.012.04.01.0XFM-081012-04
8.010.014.031.51.0XFM-081014-31
9.011.015.018.00.5XFM-0911-18
10.012.018.05.01.0XFM-1012-05
10.012.018.06.01.0XFM-1012-06
10.012.018.07.01.0XFM-1012-07
10.012.015.08.01.0XFM-1012-08
10.012.018.09.01.0XFM-1012-09
10.012.018.012.01.0XFM-1012-12
10.012.018.015.01.0XFM-1012-15
10.012.018.017.01.0XFM-1012-17
10.012.018.018.01.0XFM-1012-18
10.012.015.022.01.0XFM-1012-22
10.012.018.025.01.0XFM-1012-25
12.0+0.016
+0.086		14.020.05.51.0XFM-1214-055
12.014.020.07.01.0XFM-1214-07
12.014.020.09.01.0XFM-1214-09
12.014.020.012.01.0XFM-1214-12
12.014.020.015.01.0XFM-1214-15
12.014.020.017.01.0XFM-1214-17
12.014.018.03.91.0XFM-121418-039
12.0+0.016
+0.086		14.018.05.91.0XFM-121418-059
14.016.022.010.01.0XFM-1416-10
14.016.022.012.01.0XFM-1416-12
14.016.022.017.01.0XFM-1416-17
15.017.023.06.01.0XFM-1517-06
15.017.023.09.01.0XFM-1517-09
15.017.023.012.01.0XFM-1517-12
15.017.023.017.01.0XFM-1517-17
16.018.024.012.01.0XFM-1618-12
16.018.024.017.01.0XFM-1618-17
18.020.026.012.01.0XFM-1820-12
18.020.026.017.01.0XFM-1820-17
18.020.026.022.01.0XFM-1820-22
20.0+0.020
+0.104		23.030.06.51.5XFM-2023-065
20.023.030.07.51.5XFM-2023-075
20.023.030.011.01.5XFM-2023-11
20.023.030.016.51.5XFM-2023-16
20.023.030.021.01.5XFM-2023-21
25.028.035.011.51.5XFM-2528-11
25.028.035.013.51.5XFM-2528-13
25.028.035.016.51.5XFM-2528-16
25.028.035.021.01.5XFM-2528-21
25.028.033.08.01.0XFM-252833-08
27.030.038.020.01.5XFM-2730-20
30.034.042.016.02.0XFM-3034-16
30.034.042.026.02.0XFM-3034-26
30.034.042.040.02.0XFM-3034-40
32.0+0.025
+0.125		36.045.015.02.0XFM-3236-15
32.036.045.026.02.0XFM-3236-26
35.039.047.016.02.0XFM-3539-16
35.039.047.026.02.0XFM-3539-26
40.044.052.022.02.0XFM-4044-22
40.044.052.030.02.0XFM-4044-30
40.044.052.040.02.0XFM-4044-40
45.050.058.050.02.0XFM-4550-50
50.055.063.040.02.0XFM-5055-40
60.0+0.030
+0.150		65.073.040.02.0XFM-6065-40
70.075.083.040.02.0XFM-7075-40
75.080.088.050.02.0XFM-7580-50
3) After press-fit.
Numero di dati da visualizzare
30
45
60
  1. << Indietro
  2. 1
  3. 2
Codice componente
XFM-3034-26
XFM-3034-40
XFM-3236-15
XFM-3236-26
XFM-3539-16
XFM-3539-26
XFM-4044-22
XFM-4044-30
XFM-4044-40
XFM-4550-50
XFM-5055-40
XFM-6065-40
XFM-7075-40
XFM-7580-50
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSTipo Diametro interno d1
(Ø) 		D.E. d2
(Ø) 		Lunghezza complessiva b1
(mm) 		Max. gamma di valori PV ammessi
(N/mm2•m/s) 		Max. Velocità ammessa V
(m/s) 		Tolleranza albero raccomandata Spessore T
(mm) 		Gamma di temperature di esercizio
(°C) 		Diam. esterno flangia d3
(mm)

18.94 €

10.04 €

1 Disponibile Stesso giorno

Stock

10-303415-10-2--

23.50 €

1 Disponibile 3 giorni -Con flangia3034401,1–2.01.5h9--42

17.56 €

1 Disponibile 4 giorni -Con flangia3236151,1–2.01.5h9--45

20.64 €

9.49 €

1 Disponibile Stesso giorno

Stock

-Con flangia3236261,1–2.01.5h9--45

18.50 €

9.81 €

1 Disponibile Stesso giorno

Stock

10-353915-10-2--

22.04 €

1 Disponibile 3 giorni 10-353915-10-2--

26.24 €

13.91 €

1 Disponibile Stesso giorno

Stock

10-404415-10-2--

27.94 €

1 Disponibile 3 giorni -Con flangia4044301,1–2.01.5h9--52

29.74 €

1 Disponibile 3 giorni -Con flangia4044401,1–2.01.5h9--52

52.66 €

1 Disponibile 3 giorni -Con flangia4550501,1–2.01.5h9--58

54.92 €

1 Disponibile 4 giorni -Con flangia5055401,1–2.01.5h9--63

71.58 €

1 Disponibile 3 giorni -Con flangia6065401,1–2.01.5h9--73

84.46 €

1 Disponibile 5 giorni -Con flangia7075401,1–2.01.5h9--83

100.50 €

1 Disponibile 5 giorni -Con flangia7580501,1–2.01.5h9--88

Loading...

  1. << Indietro
  2. 1
  3. 2
 

Informazioni di base

Gruppo resina Gruppo di polimeri a prestazioni elevate Ambiente Standard / Termoresistenza / Resistenza a materiali estranei / Resistenza alle vibrazioni / In olio / In acqua / In acqua di mare / In sost. chimiche Max. valore PV ammesso(N/mm²·m/s) 1.32
Max. Pressione di superficie ammessa P(N/mm2) 150 Tolleranza foro di alloggio raccomandata h7 Condizione di lubrificazione Senza lubrificazione

Configura

Ripristina

74Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Stock

Proprietà di base

  • Tipo

    • Con flangia

    Ripristina

  • Diametro interno d1(Ø)

    • 2
    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 14
    • 15
    • 16
    • 18
    • 20
    • 25
    • 27
    • 30
    • 32
    • 35
    • 40
    • 45
    • 50
    • 60
    • 70
    • 75

    Ripristina

  • D.E. d2(Ø)

    • 4
    • 4.5
    • 5.5
    • 7
    • 8
    • 10
    • 12
    • 14
    • 16
    • 17
    • 18
    • 20
    • 23
    • 28
    • 30
    • 34
    • 36
    • 39
    • 44
    • 50
    • 55
    • 65
    • 75
    • 80

    Ripristina

  • Lunghezza complessiva b1(mm)

    • 3
    • 3.9
    • 4
    • 5
    • 5.5
    • 5.9
    • 6
    • 7.5
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13.5
    • 15
    • 16
    • 16.5
    • 17
    • 18
    • 20
    • 21
    • 22
    • 26
    • 30
    • 31.5
    • 40
    • 50

    Ripristina

  • Max. gamma di valori PV ammessi(N/mm2•m/s)

    • 1,1–2.0

    Ripristina

  • Max. Velocità ammessa V(m/s)

    • 1.5
    • 10

    Ripristina

  • Tolleranza albero raccomandata

    • h9

    Ripristina

  • Spessore T(mm)

    • 1
    • 1.5
    • 2

    Ripristina

  • Diam. esterno flangia d3(mm)

    • 6
    • 7.5
    • 8
    • 9.5
    • 11
    • 12
    • 14
    • 15
    • 18
    • 20
    • 22
    • 23
    • 24
    • 26
    • 30
    • 33
    • 35
    • 38
    • 42
    • 45
    • 52
    • 58
    • 63
    • 73
    • 83
    • 88

    Ripristina

  • Tipo

    • XFM

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Filtrare per giorni di spedizione standard

    • Tutti gli articoli
    • Stesso giorno
    • 2 giorni o meno
    • 3 giorni o meno
    • 4 giorni o meno
    • 5 giorni o meno

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.