- Stock
- Indicare solo prodotti a magazzino
- Lato mandata, designazione nominale filettatura tubazione Tipo B (Tipo A)
- 1/4B(8A)
- 3/8B(10A)
- 1/2B
- 1/2B(15A)
- 3/4B(20A)
- 1B(25A)
- 1 1/4B(32A)
- 1 1/2B(40A)
- 2B(50A)
- Lato controllo, filettatura tubo nominale Tipo B (Tipo A)
- 1/4B(8A)
- 3/8B(10A)
- 1/2B
- 1/2B(15A)
- 3/4B(20A)
- 1B(25A)
- 1 1/4B(32A)
- 1 1/2B(40A)
- 2B(50A)
- Tipo
- CAD
- 2D
- Giorni di spedizione est.
- Tutti
- Possibile la spedizione lo stesso giorno
- Entro 6 giorni lavorativi
- Entro 8 giorni lavorativi
Valvola a sfera filettata, classe 10K
Codice componente:
candidati non definiti.Elenco numeri di parte
Prezzo unitario (IVA esclusa)(Prezzo unitario IVA inclusa) | Giorni spedizione standard |
|---|
72.36 € ( 86.11 € ) | 8 giorni lavorativi |
63.47 € ( 75.53 € ) | 8 giorni lavorativi |
51.73 €24.31 € ( 28.93 € ) | Articolo a stock - 1 giorno lavorativoDisponibile per la spedizione lo stesso giorno |
79.34 € ( 94.41 € ) | 8 giorni lavorativi |
86.85 € ( 103.35 € ) | 6 giorni lavorativi |
114.17 € ( 135.86 € ) | 8 giorni lavorativi |
142.70 € ( 169.81 € ) | 8 giorni lavorativi |
185.69 € ( 220.97 € ) | 8 giorni lavorativi |
Ulteriori informazioni
Informazioni di base
Stainless steel valve U Series. For general purpose and construction equipment.
[Features]
· General piping stainless steel pipe (JIS G3448) and water supply stainless steel pipe (JWWA G115)—used for stainless steel piping in construction facilities—have the following features.
· Three times the tensile strength of copper pipe, and two times the tensile strength of steel pipe.
· The lightweight body material has a thickness of approx. 1/3 to 1/2 the thickness of steel pipe with superior mechanical strength and corrosion resistance.
· No reduction in the flow area due to tuberculation due to smooth inner surface. This valve has excellent cavitation resistance resulting in improved flow rates
· The thermal expansion coefficient is similar to copper pipe and about 1.5 times that of steel pipe. Thermal conductivity must be taken into consideration due to poor expansion and contraction at 1/24 that of copper pipe and 1/4 that of steel pipe. Therefore, care is required during welding and brazing.
· Heat loss is slightly less than steel pipe.
· Screw coupling is not possible due to the thin wall connection area.
· Mechanical type fittings or butt welding is used for small diameter pipes.
· Flange connection, weld joining, or housing type joints are used for pipes with medium or larger sized diameters.