Valvola a sfera filettata, classe 10K

Valvola a sfera filettata, classe 10K
Stainless steel valve U Series. For general purpose and construction equipment.

[Features]
· General piping stainless steel pipe (JIS G3448) and water supply stainless steel pipe (JWWA G115)—used for stainless steel piping in construction facilities—have the following features.
· Three times the tensile strength of copper pipe, and two times the tensile strength of steel pipe.
· The lightweight body material has a thickness of approx. 1/3 to 1/2 the thickness of steel pipe with superior mechanical strength and corrosion resistance.
· No reduction in the flow area due to tuberculation due to smooth inner surface. This valve has excellent cavitation resistance resulting in improved flow rates
· The thermal expansion coefficient is similar to copper pipe and about 1.5 times that of steel pipe. Thermal conductivity must be taken into consideration due to poor expansion and contraction at 1/24 that of copper pipe and 1/4 that of steel pipe. Therefore, care is required during welding and brazing.
· Heat loss is slightly less than steel pipe.
· Screw coupling is not possible due to the thin wall connection area.
· Mechanical type fittings or butt welding is used for small diameter pipes.
· Flange connection, weld joining, or housing type joints are used for pipes with medium or larger sized diameters.

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente
UG-N-8A
UG-N-10A
UG-N-15A
UG-N-20A
UG-N-25A
UG-N-32A
UG-N-40A
UG-N-50A
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Lato mandata, designazione nominale filettatura tubazione Tipo B (Tipo A) Lato controllo, filettatura tubo nominale Tipo B (Tipo A) L
(mm)
H
(mm)
D1
(Ø)

61.73 €

1 8 giorni 1/4B(8A)1/4B(8A)446855

51.63 €

1 8 giorni 3/8B(10A)3/8B(10A)486855

50.22 €

1 Stesso giorno

Stock

[1/2B] 1/2B(15A)[1/2B] 1/2B(15A)526855

66.85 €

1 8 giorni 3/4B(20A)3/4B(20A)609470

86.85 €

1 6 giorni 1B(25A)1B(25A)7210170

102.28 €

1 8 giorni 1 1/4B(32A)1 1/4B(32A)8012490

122.19 €

1 8 giorni 1 1/2B(40A)1 1/2B(40A)9013890

159.20 €

1 8 giorni 2B(50A)2B(50A)100153100

Loading...

  1. 1

Informazioni di base

Profilo corpo principale Dritto Materiale corpo EN 1.4308 Equiv. Liquido applicabile Acqua / Aria / Olio / Gas / Vapore saturo
Pressione nominale 10K Lato mandata, tipo di collegamento Rc Lato di controllo, tipo di attacco Rc
Profilo leva Maniglia con profilo arrotondato Con valvole di sezionamento Standard Gamma di temperature di esercizio(°C) ::180
Metodo di funzionamento Con funzionamento elettrico Dettagli massima pressione ammessa (Vapore, aria, gas, olio e flusso pulsante a 180°C o inf.)(MPa) 1.0

Supporto tecnico