![]() | Self-aligning pads are used as stop, support and thrust pad and are suitable for installation in clamping elements. |
Dimensions | Load capacity for static load max. | Tightening torque max. | Weight | Art. No. | |||||
d1 | l | l1 | d2 | e | ball diameter | ||||
[mm] | [kN] | [Nm] | [g] | ||||||
with flat-faced ball, bearing surface plain – picture 1, heat-treated steel | |||||||||
M 8 | 36.6 | 25 | 5.8 | 14.5 | 8.5 | 8 | 25 | 20 | 22740.0013 |
M10 | 45.7 | 30 | 8.6 | 19.0 | 12.0 | 8 | 46 | 44 | 22740.0016 |
M12 | 50.7 | 35 | 8.6 | 19.0 | 12.0 | 15 | 82 | 57 | 22740.0017 |
M16 | 60.7 | 40 | 10.5 | 27.0 | 16.0 | 25 | 206 | 131 | 22740.0024 |
M20 | 77.3 | 50 | 20.0 | 33.0 | 25.0 | 90 | 407 | 277 | 22740.0030 |
M24 | 100.0 | 70 | 20.0 | 40.0 | 25.0 | 90 | 698 | 471 | 22740.0036 |
M30 x 1,5 | 100.0 | 65 | 34.6 | 51.0 | 40.0 | 165 | 1355 | 975 | 22740.0046 |
with flat-faced ball, bearing surface plain – picture 1, stainless steel | |||||||||
M 8 | 36.6 | 25 | 5.8 | 14.5 | 8.5 | 8 | 25 | 20 | 22740.0113 |
M10 | 45.7 | 30 | 8.6 | 19.0 | 12.0 | 8 | 46 | 44 | 22740.0116 |
M12 | 50.7 | 35 | 8.6 | 19.0 | 12.0 | 15 | 82 | 56 | 22740.0117 |
M16 | 60.7 | 40 | 10.5 | 27.0 | 16.0 | 25 | 206 | 129 | 22740.0124 |
M20 | 77.3 | 50 | 20.0 | 33.0 | 25.0 | 90 | 407 | 273 | 22740.0130 |
M24 | 100.0 | 70 | 20.0 | 40.0 | 25.0 | 90 | 698 | 463 | 22740.0136 |
M30 x 1,5 | 100.0 | 65 | 34.6 | 51.0 | 40.0 | 165 | 1355 | 875 | 22740.0146 |
with flat-faced ball, bearing surface ribbed – picture 2, heat-treated steel | |||||||||
M 8 | 36.6 | 25 | 5.8 | 14.5 | 8.5 | 8 | 25 | 20 | 22740.0313 |
M10 | 45.7 | 30 | 8.6 | 19.0 | 12.0 | 8 | 46 | 44 | 22740.0316 |
M12 | 50.7 | 35 | 8.6 | 19.0 | 12.0 | 15 | 82 | 56 | 22740.0317 |
M16 | 60.7 | 40 | 10.5 | 27.0 | 16.0 | 25 | 206 | 130 | 22740.0324 |
M20 | 77.3 | 50 | 20.0 | 33.0 | 25.0 | 90 | 407 | 276 | 22740.0330 |
M24 | 100.0 | 70 | 20.0 | 40.0 | 25.0 | 90 | 698 | 472 | 22740.0336 |
M30 x 1,5 | 100.0 | 65 | 34.6 | 51.0 | 40.0 | 165 | 1355 | 920 | 22740.0346 |
![]() | Self-aligning pads are used as stop, support and thrust pad and are suitable for installation in clamping elements. By resetting to the parallel position the contact point of the self-aligning pad provides a defined initial position, thus preventing the pad clamping in an oblique position when inserting the workpiece. |
Dimensions | Load capacity for static load max. | Tightening torque max. | Weight | Art. No. | |||||
d1 | l | l1 | d2 | e | ball diameter | ||||
[mm] | [kN] | [Nm] | [g] | ||||||
with flat-faced ball, bearing surface plain – picture 1, heat-treated steel | |||||||||
M 8 | 36.6 | 25 | 5.8 | 14.5 | 8.5 | 8 | 25 | 20 | 22741.0013 |
M10 | 45.7 | 30 | 8.6 | 19.0 | 12.0 | 8 | 46 | 44 | 22741.0016 |
M12 | 50.7 | 35 | 8.6 | 19.0 | 12.0 | 15 | 82 | 56 | 22741.0017 |
M16 | 60.7 | 40 | 10.5 | 27.0 | 16.0 | 25 | 206 | 128 | 22741.0024 |
M20 | 77.3 | 50 | 20.0 | 33.0 | 25.0 | 90 | 407 | 273 | 22741.0030 |
M24 | 100.0 | 70 | 20.0 | 40.0 | 25.0 | 90 | 698 | 466 | 22741.0036 |
M30 x 1,5 | 100.0 | 65 | 34.6 | 51.0 | 40.0 | 165 | 1355 | 885 | 22741.0046 |
with flat-faced ball, bearing surface plain – picture 1, stainless steel | |||||||||
M 8 | 36.6 | 25 | 5.8 | 14.5 | 8.5 | 8 | 25 | 20 | 22741.0113 |
M10 | 45.7 | 30 | 8.6 | 19.0 | 12.0 | 8 | 46 | 44 | 22741.0116 |
M12 | 50.7 | 35 | 8.6 | 19.0 | 12.0 | 15 | 82 | 56 | 22741.0117 |
M16 | 60.7 | 40 | 10.5 | 27.0 | 16.0 | 25 | 206 | 127 | 22741.0124 |
M20 | 77.3 | 50 | 20.0 | 33.0 | 25.0 | 90 | 407 | 269 | 22741.0130 |
M24 | 100.0 | 70 | 20.0 | 40.0 | 25.0 | 90 | 698 | 464 | 22741.0136 |
M30 x 1,5 | 100.0 | 65 | 34.6 | 51.0 | 40.0 | 165 | 1355 | 878 | 22741.0146 |
with flat-faced ball, bearing surface ribbed – picture 2, heat-treated steel | |||||||||
M 8 | 36.6 | 25 | 5.8 | 14.5 | 8.5 | 8 | 25 | 20 | 22741.0313 |
M10 | 45.7 | 30 | 8.6 | 19.0 | 12.0 | 8 | 46 | 44 | 22741.0316 |
M12 | 50.7 | 35 | 8.6 | 19.0 | 12.0 | 15 | 82 | 56 | 22741.0317 |
M16 | 60.7 | 40 | 10.5 | 27.0 | 16.0 | 25 | 206 | 128 | 22741.0324 |
M20 | 77.3 | 50 | 20.0 | 33.0 | 25.0 | 90 | 407 | 278 | 22741.0330 |
M24 | 100.0 | 70 | 20.0 | 40.0 | 25.0 | 90 | 698 | 466 | 22741.0336 |
M30 x 1,5 | 100.0 | 65 | 34.6 | 51.0 | 40.0 | 165 | 1355 | 915 | 22741.0346 |
Servono come supporti, piedini, riferimenti o elementi di bloccaggio nelle attrezzature.