Configura
44%
- Stock
- Indicare solo prodotti a magazzino
- Materiale corpo principale
- Ottone
- Ottone
- Applicazione
- Materiale filettatura
- Standard (Ottone)
- EN 1.4305 Equiv. / EN 1.4301 Equiv.
- D.E.1 tubo applicabile (φ)
- 4
- 6
- 8
- 10
- Profilo pulsante di rilascio
- Colore pulsante di rilascio
- Specifiche personalizzate
- Tipo
- CAD
- 2D
- 3D
- Giorni di spedizione est.
- Tutti
- Entro 4 giorni lavorativi
- Entro 11 giorni lavorativi
- Entro 18 giorni lavorativi
- Entro 19 giorni lavorativi
- Entro 23 giorni lavorativi
- Entro 31 giorni lavorativi
KQ2H, raccordo istantaneo colore bianco - D'estremità diritto
Attenzione
- See the catalog for details on materials and specifications.
- Product images may be representative images. Refer to the catalog for details.
Codice componente:
candidati non definiti.Informazioni sul prodotto
Male Connector KQ2H (Gasket Seal) Details Example
Male Connector KQ2H (Gasket Seal) KQ2H01, 05 Series / KQ2H01-33, 34, 35 Series / KQ2H03-33, 34, 35 Series / KQ2H05-34, 35 Series product image example
Male Connector KQ2H (Gasket Seal) Specification Example
| Usable fluids | Air, water Note 1: | |
|---|---|---|
| Operating pressure range Note 2: | -100 kPa to 1 MPa | |
| Guaranteed proof pressure (at 23°C) | 3 MPa | |
| Ambient temperature and fluid temperature | -5 to 60°C, For water: 0 to 40°C (no freezing) | |
| Thread | Mounting section | ISO 16030 (parallel pipe thread) |
| Nut section | JIS B0205 (metric fine thread) | |
| Thread part sealant | Seal ring | |
- Note 1: The surge pressure must be under the maximum operating pressure.
- * Note 2: Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero leakage.
Main Component Materials
| Body | C3604, PBT |
|---|---|
| Stud | C3604 (thread part) |
| Chuck | SUS304 |
| Guide | SUS304 |
| Release button | POM |
| Seal, O-ring, seal ring | NBR |
Male Connector KQ2H (Gasket Seal) Dimensions Example
KQ2H01/05 Series dimensional drawing
(Units: mm)
KQ2H01/05 Series dimensional drawing
KQ2H01/05 Series Release Button Dimensions
(Units: mm)
KQ2H01/05 Series release button dimensional drawing
| Applicable tube outer diameter Inches | Connection thread R | Model | H (width across flats) | øD | Release Button Dimensions | L | A | M | Effective area (mm2) | Minimum hole diameter | Weight g | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| X | Y | Nylon | Urethane | ||||||||||
| ø1/8 | 1/8 | KQ2H01-01□P1 | 12 | 6.7 | 6.7 | 9.5 | 14.1 | 8.9 | 13.3 | 3.4 | 2.9 | 2.5 | 6.3 |
| 1/4 | KQ2H01-02□P1 | 17 | 6.7 | 6.7 | 9.5 | 15 | 7.4 | 13.3 | 3.4 | 2.9 | 2.5 | 15.1 | |
| ø3/16 | 1/8 | KQ2H05-01□P1 | 12 | 8.3 | 8.4 | 11 | 16.7 | 11.5 | 13.3 | 7.8 | 6.5 | 3.5 | 6.8 |
| 1/4 | KQ2H05-02□P1 | 17 | 8.3 | 8.4 | 11 | 15 | 7.4 | 13.3 | 7.8 | 6.5 | 3.5 | 13.9 | |
- *□: A (Brass), N (Brass + electroless nickel plating)
KQ2H01-33, 34, 35 Series / KQ2H03-33, 34, 35 Series / KQ2H05-34, 35 Series Dimensions
(Units: mm)
KQ2H01-33, 34, 35 Series / KQ2H03-33, 34, 35 Series / KQ2H05-34, 35 Series dimensional drawing example
KQ2H01-33, 34, 35 Series / KQ2H03-33, 34, 35 Series / KQ2H05-34, 35 Series Release Button Dimensions
(Units: mm)
KQ2H01-33, 34, 35 Series / KQ2H03-33, 34, 35 Series / KQ2H05-34, 35 Series release button dimensional drawing
| Applicable tube outer diameter Inches | Connection thread NPT | Model | H (width across flats) | øD | Release Button Dimensions | L | A | M | Effective area (mm2) | Minimum hole diameter | Weight g | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| X | Y | Nylon | Urethane | ||||||||||
| ø1/8 | 1/16 | KQ2H01-33□P1 | 11.11 | 6.7 | 6.7 | 9.5 | 16.8 | 11.4 | 13.3 | 3 | 2.5 | 2.5 | 14.9 |
| 1/8 | KQ2H01-34□P1 | 12.7 | 6.7 | 6.7 | 9.5 | 14.3 | 8.9 | 13.3 | 3 | 2.5 | 2.5 | 8.7 | |
| 1/4 | KQ2H01-35□P1 | 17.46 | 6.7 | 6.7 | 9.5 | 15.6 | 7.5 | 13.3 | 3.4 | 2.9 | 2.5 | 16.6 | |
| ø5/32 | 1/16 | KQ2H03-33□P1 | 11.11 | 7.7 | 7.7 | 10 | 19 | 13.6 | 13.3 | 4.8 | 3.4 | 3 | 13.9 |
| 1/8 | KQ2H03-34□P1 | 12.7 | 7.7 | 7.7 | 10 | 16.4 | 11 | 13.3 | 4.8 | 3.4 | 3 | 7.6 | |
| 1/4 | KQ2H03-35□P1 | 17.46 | 7.7 | 7.7 | 10 | 15.6 | 7.5 | 13.3 | 4.8 | 3.4 | 3 | 16 | |
| ø3/16 | 1/8 | KQ2H05-34□P1 | 12.7 | 8.3 | 8.4 | 11 | 16.9 | 11.5 | 13.3 | 7.8 | 6.5 | 3.6 | 7.8 |
| 1/4 | KQ2H05-35□P1 | 17.46 | 8.3 | 8.4 | 11 | 15.6 | 7.5 | 13.3 | 7.8 | 6.5 | 3.5 | 15.3 | |
- *□: A (Brass), N (Brass + electroless nickel plating)
Elenco numeri di parte
Numero di articoli
| Codice componente |
|---|
Prezzo unitario (IVA esclusa)(Prezzo unitario IVA inclusa) | Giorni spedizione standard |
|---|
3.81 € ( 4.53 € ) | 23 giorni lavorativi |
4.14 € ( 4.93 € ) | 23 giorni lavorativi |
5.23 € ( 6.22 € ) | 23 giorni lavorativi |
4.62 € ( 5.50 € ) | 23 giorni lavorativi |
4.12 € ( 4.90 € ) | 23 giorni lavorativi |
4.12 € ( 4.90 € ) | 31 giorni lavorativi |
3.81 € ( 4.53 € ) | 23 giorni lavorativi |
4.87 € ( 5.80 € ) | 23 giorni lavorativi |
5.41 € ( 6.44 € ) | 23 giorni lavorativi |
2.25 € ( 2.68 € ) | 4 giorni lavorativi |
2.25 € ( 2.68 € ) | 23 giorni lavorativi |
2.67 € ( 3.18 € ) | 11 giorni lavorativi |
2.67 € ( 3.18 € ) | 23 giorni lavorativi |
2.25 € ( 2.68 € ) | 4 giorni lavorativi |
2.25 € ( 2.68 € ) | 4 giorni lavorativi |
2.67 € ( 3.18 € ) | 4 giorni lavorativi |
2.67 € 1.74 € ( 2.07 € ) | 45 giorni lavorativi |
5.08 € ( 6.05 € ) | 23 giorni lavorativi |
3.08 € ( 3.67 € ) | 23 giorni lavorativi |
3.95 € ( 4.70 € ) | 23 giorni lavorativi |
5.65 € ( 6.72 € ) | 23 giorni lavorativi |
2.62 € ( 3.12 € ) | 4 giorni lavorativi |
2.62 € ( 3.12 € ) | 18 giorni lavorativi |
4.07 € ( 4.84 € ) | 4 giorni lavorativi |
4.07 € ( 4.84 € ) | 11 giorni lavorativi |
3.64 € ( 4.33 € ) | 23 giorni lavorativi |
3.64 € ( 4.33 € ) | 23 giorni lavorativi |
2.61 € ( 3.11 € ) | 4 giorni lavorativi |
2.61 € ( 3.11 € ) | 4 giorni lavorativi |
2.85 € ( 3.39 € ) | 4 giorni lavorativi |
2.85 € ( 3.39 € ) | 4 giorni lavorativi |
3.64 € ( 4.33 € ) | 4 giorni lavorativi |
3.64 € ( 4.33 € ) | 4 giorni lavorativi |
5.28 € ( 6.28 € ) | 23 giorni lavorativi |
5.38 € ( 6.40 € ) | 23 giorni lavorativi |
4.65 € ( 5.53 € ) | 23 giorni lavorativi |
2.50 € ( 2.98 € ) | 23 giorni lavorativi |
5.47 € ( 6.51 € ) | 11 giorni lavorativi |
5.66 € ( 6.74 € ) | 11 giorni lavorativi |
6.38 € ( 7.59 € ) | 23 giorni lavorativi |
2.92 € ( 3.47 € ) | 4 giorni lavorativi |
3.16 € ( 3.76 € ) | 4 giorni lavorativi |
6.29 € ( 7.49 € ) | 11 giorni lavorativi |
2.92 € ( 3.47 € ) | 4 giorni lavorativi |
3.16 € 2.05 € ( 2.44 € ) | 4 giorni lavorativi |
3.64 € ( 4.33 € ) | 4 giorni lavorativi |
4.62 € ( 5.50 € ) | 23 giorni lavorativi |
4.54 € ( 5.40 € ) | 23 giorni lavorativi |
4.77 € ( 5.68 € ) | 23 giorni lavorativi |
6.46 € ( 7.69 € ) | 23 giorni lavorativi |
5.98 € ( 7.12 € ) | 23 giorni lavorativi |
7.23 € ( 8.60 € ) | 23 giorni lavorativi |
5.05 € ( 6.01 € ) | 11 giorni lavorativi |
4.93 € ( 5.87 € ) | 4 giorni lavorativi |
5.05 € ( 6.01 € ) | 4 giorni lavorativi |
6.14 € ( 7.31 € ) | 11 giorni lavorativi |
5.05 € ( 6.01 € ) | 4 giorni lavorativi |
4.93 € ( 5.87 € ) | 4 giorni lavorativi |
5.04 € ( 6.00 € ) | 4 giorni lavorativi |
6.14 € ( 7.31 € ) | 4 giorni lavorativi |
Ulteriori informazioni
Informazioni di base
A one-touch male connector fitting (KQ2H) with gasket seal from SMC.
[Features]
· Improved tube insertion/removal.
· Compact and light weight.
[Applications]
· Use to pipe from female threads in the same direction.
[See here for catalog]
· Applicable tube outer diameter (metric), Connection thread [G], Release button: oval (pp. 60) / circle (pp. 168)
· Applicable tube outer diameter (mm), Connection thread [R], Release button: oval (pp. 68) circle (pp. 176)
· Applicable tube outer diameter (inches), Connection thread [NPT], Release button: oval (pp. 76) circle (pp. 188)
· Applicable tube outer diameter (inches), Connection thread [R] Release button: oval (pp. 84) circle (pp. 198)
Attenzione
- See the catalog for details on materials and specifications.
- Product images may be representative images. Refer to the catalog for details.
