KDM, spina / presa, connettore multiplo rettangolare

KDM, spina / presa, connettore multiplo rettangolare
A one-touch fitting that helps reduce work loads when shipping panels and machinery separately, or when replacing units due to failure.
[Features]
· Requires less installation space than when using multiple bulkhead unions for panels.
· Multiple pipes can be attached and detached in a single action, meaning fewer piping mistakes with much less time needed to be spent on installation work.
· Being a one-touch fitting, it helps greatly reduce the amount of time spent on piping.

(i)Nota

  • *See the catalog for detailed specs and materials.
  • The product image shows the one touch fitting "rectangular multi-connector."

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Rectangular Multi-Connector Socket Specification

KDM Series

Number of connection tubes Tube outer diameter Part number Release button color
Socket
10 pcs. ø3.2 KDM10S-23 Blue
ø4 KDM10S-04
ø6 KDM10S-06
ø8 KDM10S-08
20 pcs. ø3.2 KDM20S-23
ø4 KDM20S-04
ø6 KDM20S-06
ø8 KDM20S-08

Units: mm

Applicable Tube

Tube material FEP, PFA, nylon, soft nylon, polyurethane
Tube outer diameter ø3.2, ø4, ø6, ø8

Specifications

Usable fluids Air
Operating pressure range Note: -100 kPa to 1 MPa
Guaranteed proof pressure 1.5 MPa
Ambient temperature and working fluid temperature -5 to 60°C (no freezing)

Note: Do not use with a leak tester or for other forms of vacuum retention as they are not guaranteed for zero leakage.

10-KDM Series

Number of connection tubes Tube outer diameter Part number Release button color
Socket
10 pcs. ø3.2 10-KDM10S-23 White
ø4 10-KDM10S-04
ø6 10-KDM10S-06
ø8 10-KDM10S-08
20 pcs. ø3.2 10-KDM20S-23
ø4 10-KDM20S-04
ø6 10-KDM20S-06
ø8 10-KDM20S-08

Units: mm

Applicable Tube Material

Tube material Polyurethane
Tube outer diameter Metric size ø3.2, ø4, ø6, ø8

Specifications

Usable fluids Air
Operating pressure range Note: -100 kPa to 1 MPa
Guaranteed proof pressure 1.5 MPa
Ambient temperature and working fluid temperature -5 to 60°C (no freezing)
Grease used Fluorinated grease
Cleanliness class (ISO class) Class 5

Note: Do not use with a leak tester or for other forms of vacuum retention as they are not guaranteed for zero leakage.

Usage

1. Separation: Loosen the clamp bolt to separate the plug side from the socket side

1. Separation: Loosen the clamp bolt to separate the plug side from the socket side

2. Connection: Align the two faces and connect the plug case to the socket. Tighten the clamp bolt by hand, then tighten it further with a hex wrench (M4)

2. Connection: Align the two faces and connect the plug case to the socket. Tighten the clamp bolt by hand, then tighten it further with a hex wrench (M4)

3-1. Panel mounting: Loosen the 4 bracket screws on the socket side with a Phillips screwdriver (JIS No. 2 size) until the bracket contacts the retaining ring

3-1. Panel mounting: Loosen the 4 bracket screws on the socket side with a Phillips screwdriver (JIS No. 2 size) until the bracket contacts the retaining ring

3-2. Panel mounting: Move the panel mount bracket to the inside (move the bracket screws longways in their holes) and attach to the panel mount holes

3-2. Panel mounting: Move the panel mount bracket to the inside (move the bracket screws longways in their holes) and attach to the panel mount holes

3-3. Panel mounting: Using a Phillips screwdriver, move the bracket bolt to the outside and then tighten to secure the socket case

3-3. Panel mounting: Using a Phillips screwdriver, move the bracket bolt to the outside and then tighten to secure the socket case

3-4. Panel mounting: To remove from the panel, loosen the bracket screw until it makes contact and then move inward to remove

Codice componente
10-KDM20S-04
KDM10S-04
KDM10S-04-X12
KDM10S-06
KDM10S-06-X12
KDM10S-08
KDM10S-23
KDM20S-04
KDM20S-04-X12
KDM20S-06
KDM20S-06-X12
KDM20S-08
KDM20S-23
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Materiale corpo principale Applicazione Attacchi, riduttori D.E.1 tubo applicabile
(φ)
Number of Connection Tubes
(pc.)
Colore pulsante di rilascio Specifiche personalizzate

85.06 €

1 26 giorni [Resina PP] PPAmbiente pulito[Altro] Connettore presa420BiancoN/D

44.73 €

1 4 giorni [Resina PP] PPStandard/Mini[Altro] Connettore presa410BluN/D

44.73 €

1 Preventivo [Resina ignifuga (UL94 V-0)] Resina ritardante di fiamma (UL94 V-0 Equivalente)Standard/Mini[Altro] Presa connettore----

44.73 €

1 4 giorni [Resina PP] PPStandard/Mini[Altro] Connettore presa610BluN/D

44.73 €

1 Preventivo [Resina ignifuga (UL94 V-0)] Resina ritardante di fiamma (UL94 V-0 Equivalente)Standard/Mini[Altro] Presa connettore----

64.60 €

1 Stesso giorno

Stock

[Ottone] EN CW614N Equiv. + PBTStandard/Mini[Altro] Connettore presa810BluN/D

45.69 €

1 26 giorni [Resina PP] PPStandard/Mini[Altro] Connettore presa-10BluN/D

82.45 €

1 4 giorni [Resina PP] PPStandard/Mini[Altro] Connettore presa420BluN/D

82.40 €

1 Preventivo [Resina ignifuga (UL94 V-0)] Resina ritardante di fiamma (UL94 V-0 Equivalente)Standard/Mini[Altro] Presa connettore----

82.45 €

1 4 giorni [Resina PP] PPStandard/Mini[Altro] Connettore presa620BluN/D

82.40 €

1 Preventivo [Resina ignifuga (UL94 V-0)] Resina ritardante di fiamma (UL94 V-0 Equivalente)Standard/Mini[Altro] Presa connettore----

122.18 €

1 4 giorni [Ottone] EN CW614N Equiv. + PBTStandard/Mini[Altro] Connettore presa820BluN/D

84.39 €

1 26 giorni [Resina PP] PPStandard/Mini[Altro] Connettore presa-20BluN/D

Loading...

  1. 1

Informazioni di base

Tipo Ad azione singola Tipo raccordo Attacco femmina e riduttore Liquido applicabile Aria
Materiale guarnizione EPDM (rivestimento in fluoro)

Supporto tecnico