KBV, modulo di connessione, Modulo connettore a gomito (KBV3-R2)

KBV, modulo di connessione, Modulo connettore a gomito KBV3-R2

Dettagli del prodotto:

Codice articolo del costruttore: KBV3-R2

Marca: SMC

Prezzo: 8.37

Tempi di consegna: 4 giorni


Dati Tecnici:

Connection Type: Rc

Connection screw: 1/4

Size of Body Code: 3


(i)Nota

  • *See the catalog for detailed specs and materials.
  • Product images may be representative images. Refer to the catalog for details.

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

KBV3-R2

Piping Module KB Series Elbow Socket Module Specifications

Elbow Socket Module KBV: related images

Elbow Socket Module external appearance

Elbow Socket Module KBV: related images

Elbow Socket Module dimensional drawing

Model T
Connection threads
H
Hex size
D1 D2 D3 L1 L2 L3 L4 A Weight
g
KBV1-M5 M5 ×; 0.8 12 12.8 13.6 16.8 25.0 33.0 10.4 13.0 19.5 12.4
KBV1-M6 M6 × 1 11.6
KBV2-M5 M5 ×; 0.8 17.6 21.0 26.0 36.0 10.1 15.5 22.5 14.8
KBV2-M6 M6 × 1 14.0
KBV2-R1 Rc 1/8 14 15.2 29.5 15.3
KBV3-R1 25.2 28.6 30.5 42.6 11.4 20.5 27.0 22.0
KBV3-R2 Rc 1/4 19 18.5 32.0 19.5 27.0
KBV4-R2 22 20.9 27.0 30.4 36.5 41.4 12.2 18.0 25.0 40.6
KBV4-R3 Rc 3/8 43.0 44.7

Units: mm

Specifications

Usable fluids Air
Operating pressure range Note: -100 kPa to 1 MPa
Guaranteed pressure resistance 3 MPa
Ambient temperature and working fluid temperature -5 to 60℃ (no freezing)
Thread Mounting section JIS B0203 (tapered thread for pipes/tubes)
JIS B0205 (metric coarse thread)
Nut section JIS B0205 (metric fine thread)
Screw section seal (standard) Includes sealing agent
Copper-free specification (standard) All brass parts have electroless nickel plating

Note: Do not use with a leak tester or for other forms of vacuum retention as they are not guaranteed for zero leakage.

Main Component Materials

Body C3604, PBT, POM
Stud POM
Lock ring POM
Spring SUS304
Spring guide POM
Stopper POM
Thread C3604
Guide SUS304, PBT, C3604
Collet, release button POM
Seal, O-ring NBR
Chuck SUS304

Attachment

Elbow Socket Module KBV: related images

Attachment method 1: Align the arrows so that they match each other

Insert each of the piping modules by matching the arrows on the lock ring and the body or stud of the other module. If you are having difficulty attaching the modules, rotate them a little to the left and right while pushing in. The modules will not remain attached if the arrows have not been properly aligned and will be ejected when any pressure is applied. Do not rotate or alter the lock ring before attaching. If you do rotate the lock ring before attachment, the internal parts (spring, spring guide) may fall out.

Elbow Socket Module KBV: related images

Attachment method 2: Do not touch the lock ring

After attaching, rotate the piping modules to the left or right, or pull on them to make sure they are securely attached. However, be careful not to touch the lock ring in the process of doing this. Touching the lock ring may cause it to unlock.

Removal Method

Elbow Socket Module KBV: related images

Removal method 1: Rotate the lock ring 90°. Hold in this position.

Be sure to release the pressure inside the piping before removing. If unlocked while still pressurized, the piping modules may be forcibly ejected. Turn the lock ring 90° in the direction indicated by the arrow. This will release the lock. The lock ring will automatically hold this position, so you don't need to hold it in place by hand.

Elbow Socket Module KBV: related images

Removal method 2: Do not touch the lock ring.

Unlike with attachment, simply pull the piping modules to remove them. Be careful not to touch the lock ring in the process of doing this. If you do touch the lock ring, it may lock again and you will not be able to remove them. Once removed, the lock spring will automatically counter rotate 90° back to its original position via the action of its built-in spring.

Caution

  • Do not apply a bend to the piping modules if using them while connected. This could result in deformation or damage of the piping. Also, be sure to use the KBX bracket for connections of 5 stations or more. Failure to use the bracket may cause the piping to become deformed due to bending or deflection.
  • Each of the piping modules can be connected to other modules as long as they have the same body size.
  • When attaching female connector union and female connector elbow union, use the body's hexagonal surface and tighten with a suitable wrench. Use the root nearest the thread when tightening with a wrench. The hexagonal surface may become damaged if the wrench is not an appropriate size for it.
Codice componente
KBV3-R2
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Connection Type Connection screw Size of Body Code

8.37 €

10 4 giorni Rc1/43

Loading...

  1. 1

Informazioni di base

Tipo Ad azione singola/filettatura Tipo raccordo Direzione di montaggio a vite Liquido applicabile Aria
Materiale corpo principale PP Applicazione Standard/Mini Materiale filettatura EN CW614N Equiv.
Materiale guarnizione EPDM (rivestimento in fluoro) Montaggio a vite, direzione Gomito Gomiti Giunto a gomito
Colore pulsante di rilascio Blu

Supporto tecnico