- Lavori di manutenzione: questa pagina non sarà disponibile dalle ore 3:00 21/4/2024 alle ore 0:00 (CET) 22/4/2024 per lavori di manutenzione al server. Ci scusiamo per questo inconveniente.
Gomito maschio KSL (tipo standard) attacco a innesto rapido rotante
[Features]
· Can be used on rotating and oscillating parts of robots, etc.
· Copper-free (with electroless nickel plating).
· Sealant is standard.
· Tube materials: FEP, PFA, nylon, soft nylon, polyurethane.
[Applications]
· Use for piping at right angles from the female thread part.
(i)Nota
- For materials and specification details, please refer to the catalog.
- Product images may be representative images. Refer to the catalog for shape details.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
Male Elbow KSL (Standard Type) Specifications
Male Elbow KSL external view (M5, M6)
Male Elbow KSL dimensional drawing (M5, M6)
Male Elbow KSL external view (R)
Male Elbow KSL dimensional drawing (R)
| Applicable tubing Outer diameter (mm) | Connection thread RM | Model | H (width across flats) | D1 | D2 | L1 | L2 | *A | M | Minimum bore diameter | Effective cross-sectional area (mm2) | Weight g | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nylon | Urethane | ||||||||||||
| 4 | M5 × 0.8 | KSL04-M5 | 8 | 10.4 | 12 | 21 | 20.5 | 22 | 16 | 2.5 | 3.5 | 3.5 | 9 |
| M6 × 1 | KSL04-M6 | 21 | |||||||||||
| 1/8 | KSL04-01S | 12 | 21.1 | 23.5 | 14 | ||||||||
| 6 | M5 × 0.8 | KSL06-M5 | 8 | 12.8 | 14 | 23 | 21 | 23.5 | 17 | 2.5 | 3.5 | 3.5 | 12 |
| M6 × 1 | KSL06-M6 | 21.5 | 24 | 3 | 5.0 | 5.0 | |||||||
| 1/8 | KSL06-01S | 14 | 22.1 | 25.5 | 4 | 8.6 | 8.6 | 17 | |||||
| 1/4 | KSL06-02S | 25.5 | 26.5 | 23 | |||||||||
| 8 | 1/8 | KSL08-01S | 17 | 15.2 | 17 | 26 | 25.6 | 30 | 18.5 | 6 | 21.6 | 14.9 | 23 |
| 1/4 | KSL08-02S | 29 | 31 | 29 | |||||||||
| 3/8 | KSL08-03S | 29.9 | 32 | 38 | |||||||||
| 10 | 1/4 | KSL10-02S | 22 | 18.5 | 22 | 31.5 | 33.5 | 37.5 | 21 | 7 | 30.5 | 25.0 | 56 |
| 3/8 | KSL10-03S | 33.9 | 38 | 64 | |||||||||
| 1/2 | KSL10-04S | 37.1 | 39.5 | 82 | |||||||||
| 12 | 3/8 | KSL12-03S | 24 | 20.9 | 24 | 34 | 35.4 | 40.5 | 22 | 8 | 35.1 | 35.1 | 76 |
| 1/2 | KSL12-04S | 38.6 | 42 | 93 | |||||||||
Units: mm
* Reference dimensions of R thread after installation
Male Elbow KSL external view (UNF)
Male Elbow KSL dimensional drawing (UNF)
Male Elbow KSL external view (NPT)
Male Elbow KSL dimensional drawing (NPT)
| Applicable tubing outer diameter (inch) | Connection thread UNF NPT | Model | H (width across flats) | D1 | D2 | L1 | L2 | *A | M | Minimum bore diameter | Effective cross-sectional area (mm2) | Weight g | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nylon | Urethane | ||||||||||||
| 5/32 | 10-32UNF | KSL03-32 | 8 | 10.4 | 12 | 21 | 20.5 | 22 | 16 | 2.5 | 3.5 | 3.5 | 9 |
| 1/8 | KSL03-34S | 12.7 | 21.1 | 23.5 | 14 | ||||||||
| 1/4 | 1/8 | KSL07-34S | 14.29 | 13.2 | 14 | 23.5 | 22.1 | 25.5 | 17 | 4 | 8.6 | 8.6 | 17 |
| 1/4 | KSL07-35S | 25.5 | 26.5 | 23 | |||||||||
| 5/16 | 1/8 | KSL09-34S | 17.46 | 15.2 | 17 | 26 | 25.6 | 30 | 18.5 | 6 | 21.6 | 14.9 | 23 |
| 1/4 | KSL09-35S | 29 | 31 | 29 | |||||||||
| 3/8 | 1/4 | KSL11-35S | 22.23 | 17.9 | 22 | 31.5 | 33.5 | 37 | 21 | 7 | 30.5 | 25.0 | 56 |
| 3/8 | KSL11-36S | 33.9 | 38 | 64 | |||||||||
Units: mm
* Reference dimensions of NPT thread after installation
Structural Drawing
KS Series (Standard Type) Structural Drawing
Specifications
- Usable fluids: Air
- Operating pressure range (Note 1): -100 kPa to +1 MPa
- Proof pressure: 3 MPa
- Ambient and fluid temperature: -5 to +60°C (no freezing)
- Threads: JIS B0203 (taper thread for piping), JIS B0205 (metric coarse thread), ANSI/ASMEB1.20.1 (NPT thread), JIS B0212 (Unified Fine Thread [UNF])
(Note 1) Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero leakage. Also, when using in a vacuum, grease may enter the inside due to the nature of its construction.
Rotating Torque / Allowable Number Of Rotations
| Applicable tubing outer diameter | ø4 | ø6 | ø8 | ø10 | ø12 | |
|---|---|---|---|---|---|---|
| Rotating torque N⋅mNote 2) | 0.006 | 0.012 | 0.014 | 0.020 | 0.022 | |
| Allowable number of rotations (s)-1 Note 3) | KS Series | 8.4 | 8.4 | 6.7 | 5 | 4.2 |
(Note 2) Rotating torque under pressure 0.5 MPa.
(Note 3) Number of rotations per second.
| Applicable Tubing Outer Diameter | ø5/32" | ø1/4" | ø5/16" | ø3/8" |
|---|---|---|---|---|
| Rotating torque N⋅mNote 2) | 0.006 | 0.012 | 0.014 | 0.020 |
| Allowable number of rotations (s)-1 Note 3) | 8.3 | 8.3 | 6.7 | 5 |
(Note 2) Rotating torque under pressure 0.5 MPa.
(Note 3) Number of rotations per second.
Principle Part Materials
| Principle parts | KS Series |
|---|---|
| Body | PBT |
| Stud, holder, guide | SUS304, C3604 (with electroless nickel plating), PBT |
| Chuck, retainer | SUS304 |
| Collet / Release button / Retaining ring | Polyacetal |
| O-ring/Seal | NBR |
| Rotary seal | NBR |
| Slide bearing | Oil-containing polyacetal |
| Scraper | - |
| Ball bearings | Bearing steel |
| Gasket | SUS304/NBR |
Notes
- *1Ball bearings are used in the rotating parts, so please implement the tube piping in such a way as to avoid lateral load. If there is lateral load applied to ball bearings, then their life expectancy may be affected adversely. Using a flexible polyurethane tube is recommended when lateral load is applied.
- *2Do not use in an environment where it will be exposed to water. Contact with water will cause outflow of the lubricating oil used in the ball bearings, affecting rotating performance and equipment life-span.
- *3Fluorine grease is used on the rotating parts.
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | D.E.1 tubo applicabile (φ) | Connection Type | Connection screw | |
|---|---|---|---|---|---|---|---|
13.71 € | 2 | 26 giorni | - | UNF | 10-32 | ||
13.71 € | 2 | 26 giorni | - | NPT | 1/8 | ||
13.71 € | 2 |
Stesso giorno
Stock | 4 | R | 1/8 | ||
13.71 € | 2 | 3 giorni | 4 | M | 5×0.8 | ||
13.71 € | 2 | 4 giorni | 4 | M | 6×1.0 | ||
14.69 € | 2 | 3 giorni | 6 | R | 1/8 | ||
14.69 € | 2 | 4 giorni | 6 | R | 1/4 | ||
14.34 € | 2 | 4 giorni | 6 | M | 5×0.8 | ||
14.34 € | 2 | 4 giorni | 6 | M | 6×1.0 | ||
14.61 € | 2 | 26 giorni | - | NPT | 1/8 | ||
14.69 € | 2 | 26 giorni | - | NPT | 1/4 | ||
17.47 € | 2 |
Stesso giorno
Stock | 8 | R | 1/8 | ||
17.47 € | 2 | 3 giorni | 8 | R | 1/4 | ||
17.47 € | 2 | 4 giorni | 8 | R | 3/8 | ||
19.40 € | 2 | 4 giorni | - | NPT | 1/8 | ||
19.40 € | 2 | 4 giorni | - | NPT | 1/4 | ||
26.13 € | 2 | 3 giorni | 10 | R | 1/4 | ||
26.13 € | 2 | 4 giorni | 10 | R | 3/8 | ||
26.23 € | 2 | 4 giorni | 10 | R | 1/2 | ||
26.13 € | 2 | 26 giorni | - | NPT | 1/4 | ||
27.89 € | 2 | 4 giorni | - | NPT | 3/8 | ||
33.11 € | 2 | 4 giorni | - | R | 3/8 | ||
33.11 € | 2 |
Stesso giorno
Stock | - | R | 1/2 |
Loading...
Informazioni di base
| Tipo | Ad azione singola/filettatura | Tipo raccordo | Direzione di montaggio a vite | Liquido applicabile | Aria |
|---|---|---|---|---|---|
| Materiale corpo principale | Ottone | Applicazione | Standard/Mini | Materiale filettatura | PP |
| Materiale guarnizione | EPDM (rivestimento in fluoro) | Montaggio a vite, direzione | Gomito | Gomiti | Giunto a gomito |
| Per parte a snodo, parte girevole | Giunto a gomito orientabile per tubo ad azione singola | Number of Connection Tubes(pc.) | 1 |
Configura
Stock
-
- Indicare solo prodotti a magazzino
Proprietà di base
-
D.E.1 tubo applicabile(φ)
-
Connection Type
- M
- NPT
- R
- UNF
-
Connection screw
- 1/2
- 1/4
- 1/8
- 3/8
- 5×0.8
- 6×1.0
- 10-32
-
Tipo
- KSL
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- Stesso giorno
- 3 giorni o meno
- 4 giorni o meno
- 26 giorni o meno
Attributi opzionali
- Product images may be representative images. Refer to the catalog for shape details.
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.