ASD*FM, regolatore di flusso doppio per funzionamento bassa velocità

ASD*FM, regolatore di flusso doppio per funzionamento bassa velocità
Speed controller made by SMC Corporation.

[Features]
· Two flow-control valves and check valves integrated.
· Prevention of stick-slip phenomenon and speed control of a single-acting cylinder.
· Allows stable speed control, even with load fluctuation.
· Low-speed control for small bore cylinders.


(i)Nota

  • For specifications and details, please refer to the catalog.
  • Product images may be representative images. Refer to the catalog for details.

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Dual Speed Controller For Low-Speed Operation, ASD-FM Series Specifications

Model

Model Applicable tubing
Metric size Inch Size
4 6 8 10 1/8 "5/32 "3/16 "1/4 "5/16 "3/8 "
ASD230FM-M5 - - - - - - - -
ASD330FM-01 - - - - - - - -
ASD430FM-02 - - - - - - -
ASD230FM-U10/32 - - - - - -
ASD330FM-N01 - - - - - - -
ASD430FM-N02 - - - - - - -

Specifications

Usable fluids Air
Proof pressure 1.5 MPa
Max. operating pressure 1 MPa
Min. operating pressure 0.1 MPa
Ambient and fluid temperature -5 to 60℃ (no freezing)
Note 1)Applicable tubing material Nylon, soft nylon, polyurethane

Note 1) Use caution at the max. operating pressure when using soft nylon or polyurethane tubing.
Note 2) All brass components are electroless nickel plated. The lock nut of the meter-out side is zinc chromate plated (the round lock nut is electroless nickel plated). The meter-in side lock nut and M5 type handle are black zinc chromate plated.

Flow rate and sonic conductance

Model ASD230FM ASD330FM ASD430FM
Tube outer diameter Metric size ø4, ø6 ø6, ø8 ø6 ø8, ø10
Inch Size ø1/8 ", ø5/32 "
ø3/16 ", ø1/4 "
ø3/16 ", ø1/4 "- ø1/4 ",ø5/16 "
ø3/8 "
Controlled flow Flow rate L/min (ANR) 7 12 38
Sonic conductance dm3/(s·bar) 0.02 0.04 0.12
Critical pressure ratio 0.25 0.2 0.2
Free flow Flow rate L/min (ANR) 7 12 38
Sonic conductance dm3/(s·bar) 0.02 0.04 0.12
Critical pressure ratio 0.3 0.15 0.15

Note 1) Flow rate at a pressure of 0.5 MPa and a temperature of 20°C.

Structural Drawing

Dual Speed Controller For Low-Speed Operation, ASD-FM Series: related images

ASD230FM structural drawing

No. Part Name Material Note
1 Body A PBT -
2 Elbow body PBT -
3 Handle PBTNote 1) Black
4 Body B Brass Electroless nickel plating
5 Body B Brass Electroless nickel plating
6 Needle Brass Electroless nickel plating
7 Seat ring Brass Electroless nickel plating
8 Needle guide Brass Electroless nickel plating
9 Lock nut SteelNote 2) Zinc chromate platedNote 3)
10 Lock nut SteelNote 2) Black zinc chromate plated
Dual Speed Controller For Low-Speed Operation, ASD-FM Series: related images

ASD330FM/430FM structural drawing

No. Part Name Material Note
11 U-seal HNBR -
12 U-seal HNBR -
13 Cassette - -
14 Seal NBR -
15 O-ring NBR -
16 O-ring NBR -
17 O-ring NBR -
18 Spacer - -
19 Gasket NBR / stainless steel M5 type only

Note 1) ASD230FM type is brass (black zinc chromate plated).
Note 2) The material of the lock nut option J (round type) is brass. For ASD330FM and ASD430FM only, it is made of steel.
Note 3) The surface treatment of the lock nut option J (round type) is electroless nickel plated.

External dimensions drawing: Metric size

Dual Speed Controller For Low-Speed Operation, ASD-FM Series: related images

ASD230FM dimensional drawing. Units: mm

Dual Speed Controller For Low-Speed Operation, ASD-FM Series: related images

ASD330FM/430FM dimensional drawing. Units: mm

Model d T H D1 D2 D3 L1 L2 L3 L4 Note 1) L5 Note 2) A1 Note 2) A2 M1 Weight
g
MAX. MIN. MAX. MIN. MAX. MIN.
ASD230FM-M5-04 4 M5 ×; 0.8 8 9.3 9.6 10 11.7 29.4 17.5 34.6 29.6 33.8 28.8 30.1 25.1 7.8 12.9 12
ASD230FM-M5-06 6 11.6 32.5 20.6 13.7 13
ASD330FM-01-06S 6 R1/8 12 11.6 14.2 11.8 14 38.5 22.9 39.6 34.6 35.2 30.2 32.1 27.1 10.6 13.7 29
ASD330FM-01-08S 8 15.2 15.8 44.8 28.2 38.9 33.9 18.5 31
ASD430FM-02-06S 6 R1/4 17 12.8 18.5 15 18 43.5 25.2 41.8 36.8 39.9 34.9 34.4 29.4 11 17 53
ASD430FM-02-08S 8 15.2 46.5 28.2 18.5 55
ASD430FM-02-10S 10 18.5 19.7 49.3 31 21 58

Unit: mm
Note 1) Reference dimensions.
Note 2) Reference dimensions of M5 ×; 0.8, R threads after installation.

External dimensions drawing: Inch size

Dual Speed Controller For Low-Speed Operation, ASD-FM Series: related images

ASD230FM dimensional drawing Units: mm (except where indicated with ")

Dual Speed Controller For Low-Speed Operation, ASD-FM Series: related images

ASD330FM/430FM dimensional drawing. Units: mm (except where indicated with ")

Model d T H D1 D2 D3 L1 L2 L3 L4 Note 1) L5 Note 2) A1 Note 2) A2 M1 Weight
(g)
MAX. MIN. MAX. MIN. MAX. MIN.
ASD230FM-U10/32-01 1/8 "10-32
UNF
8 8.4 9.6 10 11.7 29.4 17.5 34.6 29.6 33.8 28.8 30.1 25.1 7.8 12.9 12
ASD230FM-U10/32-03 5/32 "9.3 13
ASD230FM-U10/32-05 3/16 "11.4 35.2 23.3 16.5 14
ASD330FM-U10/32-07 1/4 "12 32.6 20.7 13.5 15
ASD330FM-N01-05S 3/16 "NPT1/8 12.7 11.4 14.2 11.8 14 39.5 23.9 39.6 34.6 35.2 30.2 32 27 10.6 16.5 30
ASD330FM-N01-07S 1/4 "13.2 15.8 42.2 25.6 38.9 33.9 17 31
ASD330FM-N01-09S 5/16 "15.2 44.8 28.2 18.5
ASD430FM-N02-07S 1/4 "NPT1/4 17.5 13.2 18.5 15 18 43.9 25.6 41.7 36.7 39.9 34.9 34.6 29.6 11 17 55
ASD430FM-N02-09S 5/16 "15.2 46.5 28.2 18.5
ASD430FM-N02-11S 3/8 "18.5 19.7 49.3 32.6 21 62

Units: mm (except where indicated with ")
Note 1) Reference dimensions.
Note 2) Reference dimensions of 10-32UNF and NPT threads after installation.

*See the manufacturer's catalog for information other than the above.

Codice componente
10-ASD230FM-M5-04
10-ASD330FM-01-06S
10-ASD430FM-02-06S
ASD230FM-M5-04
ASD230FM-M5-04-J
ASD230FM-M5-06
ASD230FM-U10/32-01
ASD230FM-U10/32-03
ASD230FM-U10/32-05
ASD230FM-U10/32-07
ASD330FM-01-06S
ASD330FM-01-06S-J
ASD330FM-01-08S
ASD330FM-N01-05S
ASD330FM-N01-07S
ASD330FM-N01-09S
ASD430FM-02-06S
ASD430FM-02-06S-J
ASD430FM-02-08S
ASD430FM-02-10S
ASD430FM-N02-07S
ASD430FM-N02-09S
ASD430FM-N02-11S
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Ambiente d'esercizio, applicazioni Opzione controdado Connection Dia. Types of Screw Applicable Tube O.D. mm
(mm)
Applicable Tube O.D. inch size
(inch)
Body Size Sealing Method Specifiche su ordinazione

24.74 €

1 6 giorni Ambiente pulitoblocco a forma dado----M5 standardSenza guarnizione-

24.94 €

1 26 giorni Ambiente pulitoblocco a forma dado-----Con guarnizione-

23.10 €

1 26 giorni Ambiente pulitoblocco a forma dado-----Con guarnizione-

21.85 €

1 Stesso giorno

Stock

Standardblocco a forma dado5 × 0.8M4-M5 standardSenza tenutaAssente

22.04 €

1 6 giorni Standardblocco di forma dado5 × 0.8M4-M5 StandardSenza tenutaAssente

21.85 €

1 26 giorni Standardblocco a forma dado5 × 0.8M6-M5 StandardSenza tenutaAssente

22.21 €

1 26 giorni Standardblocco a forma dado10-32UNF-1/8M5 StandardSenza tenutaAssente

21.85 €

1 26 giorni Standardblocco a forma dado10-32UNF-5/32M5 StandardSenza tenutaAssente

21.85 €

1 26 giorni Standardblocco a forma dado10-32UNF-3/16M5 StandardSenza tenutaAssente

21.85 €

1 26 giorni Standardblocco a forma dado----M5 standardSenza guarnizione-

28.53 €

1 Stesso giorno

Stock

Standardblocco a forma dado1/8R6-1/8 standardCon guarnizioneAssente

28.52 €

1 26 giorni Standardblocco di forma dado1/8R6-1/8 StandardCon guarnizioneAssente

28.53 €

1 Stesso giorno

Stock

Standardblocco a forma dado1/8R8-1/8 StandardCon guarnizioneAssente

27.06 €

1 26 giorni Standardblocco a forma dado1/8NPT-3/161/8 StandardCon guarnizioneAssente

28.53 €

1 26 giorni Standardblocco a forma dado1/8NPT-1/41/8 StandardCon guarnizioneAssente

24.77 €

1 26 giorni Standardblocco a forma dado1/8NPT-5/161/8 StandardCon guarnizioneAssente

29.87 €

1 26 giorni Standardblocco a forma dado1/4R6-1/4 StandardCon guarnizioneAssente

29.87 €

1 26 giorni Standardblocco di forma dado1/4R6-1/4 StandardCon guarnizioneAssente

33.27 €

1 26 giorni Standardblocco a forma dado1/4R8-1/4 standardCon guarnizioneAssente

33.27 €

1 26 giorni Standardblocco a forma dado1/4R10-1/4 StandardCon guarnizioneAssente

29.87 €

1 26 giorni Standardblocco a forma dado1/4NPT-1/41/4 StandardCon guarnizioneAssente

29.87 €

1 26 giorni Standardblocco a forma dado1/4NPT-5/161/4 StandardCon guarnizioneAssente

33.27 €

1 26 giorni Standardblocco a forma dado1/4NPT63/81/4 StandardCon guarnizioneAssente

Loading...

  1. 1

Informazioni di base

Tipo Regolatore di velocità Profilo corpo principale Universale Metodo di controllo Misurazione Uscita/Ingresso
Tipo giunto Filettatura maschio + attacchi a innesto rapido Materiale corpo principale PBT Materiale filettatura Acciaio inox (EN 1.4305 Equiv.)
Con manopola Resina

Supporto tecnico