LQ1E, raccordo in resina fluoropolimerica gran purezza, collegamento a tubo, intermedio a gomito
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.
(i)Nota
- Refer to the catalog for product specifications.
- Product images may be representative images. Refer to the catalog for details.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
Union Elbow LQ1E Inch Size Specifications
Common Specifications
| Item | Model | |||||
|---|---|---|---|---|---|---|
| LQ1□10 | LQ1□20 | LQ1□30 | LQ1□40 | LQ1□50 | LQ1□60 | |
| Material | New PFA | |||||
| Maximum operating pressure (at 20°C) | 1.0 MPa | |||||
| Withstand pressure | Refer to the withstand pressure and heat resistance performance curves. | |||||
| Operating temperature | 0 to 200℃ | |||||
Withstand pressure and heat resistance performance
Withstand pressure and heat resistance performance curves
Series
| Series | Size | Pipe connection port diameter | Tube outer diameter | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch Size | |||||||||||||||
| None | 1/8 " | 1/4 " | 3/8 " | 1/2 " | 3/4 " | 1 " | 1/8 " | 3/16 " | 1/4 " | 3/8 " | 1/2 " | 3/4 " | 1 " | ||
| Union Elbow LQ1E | 1 | ○ | - | - | - | - | - | - | ○ | - | - | - | - | - | - |
| 2 | ○ | - | - | - | - | - | - | ● | ● | ○ | - | - | - | - | |
| 3 | ○ | - | - | - | - | - | - | - | - | ● | ○ | - | - | - | |
| 4 | ○ | - | - | - | - | - | - | - | - | - | ● | ○ | - | - | |
| 5 | ○ | - | - | - | - | - | - | - | - | - | - | ● | ○ | - | |
| 6 | ○ | - | - | - | - | - | - | - | - | - | - | - | ● | ○ | |
Outline/dimensions
Union Elbow Outline Drawing
Union Elbow dimensional drawing
(E): Shows the approximate dimension of the inserted tubing from the end of the nut
Union Elbow dimensional drawing for size 1
Union Elbow dimensional drawing for sizes 2 to 5
Union Elbow dimensional drawing for size 6
| Model | Applicable tube outer diameter | B | C | E | H | L | M |
|---|---|---|---|---|---|---|---|
| LQ1E1A | 1/8 " | 2 | 4 | 10 | - | 18.5 | 11.5 |
| LQ1E2A□□ | 1/4 " | 4 | 6 | 15 | 14 | 28 | 16.5 |
| LQ1E2B□□ | 3/16 " | ||||||
| LQ1E3A□□ | 3/8 " | 5 | 9 | 20 | 17 | 36.5 | 23 |
| LQ1E3B□□ | 1/4 " | ||||||
| LQ1E4A□□ | 1/2 " | 6 | 9 | 24 | 21 | 43 | 28 |
| LQ1E4B□□ | 3/8 " | ||||||
| LQ1E5A□□ | 3/4 " | 7 | 14 | 29 | 26 | 54 | 39 |
| LQ1E5B□□ | 1/2 " | ||||||
| LQ1E6A□□ | 1 " | 8 | 18 | 39.5 | 36 | 69.5 | 49 |
| LQ1E6B□□ | 3/4 " |
Units: mm
Notes For Tubing
1. Use the dedicated tool for connecting tubes.
Refer to "High-Purity Fluoropolymer Fittings / Hyper Fitting LQ1, 2 Series Work Procedure Instructions" for notes regarding tube connections and dedicated tools.
Dedicated Tool Outline Drawing
2. Tighten the nut as far as the end surface of the main body. In order to confirm that it has properly reached the end surface of the main body, tighten by a further 1/8th (approx.) of a turn. You will know that you have sufficiently tightened the nut if it will turn no further past this point. Be sure to also refer to the appropriate tightening torques shown below.
| Body size | Torque (N·m) |
|---|---|
| 2 | 0.3 to 0.4 |
| 3 | 0.8 to 1.0 |
| 4 | 1.0 to 1.2 |
| 5 | 2.5 to 3.0 |
| 6 | 5.5 to 6.0 |
Note: For body size 1, tighten by hand.
Codice componente
|
|---|
| LQ1E1A |
| LQ1E2A |
| LQ1E3A |
| LQ1E3A-1 |
| LQ1E3B |
| LQ1E4A |
| LQ1E4A-1 |
| LQ1E4B |
| LQ1E5A |
| LQ1E5A-1 |
| LQ1E5B |
| LQ1E6A |
| LQ1E6B |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | D.E. tubo applicabile (pollici) D (D1) | Packaging | Size of Body | |
|---|---|---|---|---|---|---|---|
19.52 € | 1 | 26 giorni | 1/8 | Confezionamento sterile classe M3.5 Equivalente | 1 | ||
27.53 € | 1 |
Stesso giorno
Stock | 1/4 | Confezionamento sterile classe M3.5 Equivalente | 2 | ||
39.68 € | 1 | 26 giorni | 3/8 | Confezionamento sterile classe M3.5 Equivalente | 3 | ||
39.27 € | 1 | 26 giorni | 3/8 | Confezionamento standard equivalente alla classe M5.5 | 3 | ||
39.68 € | 1 | 26 giorni | 1/4 | Confezionamento sterile classe M3.5 Equivalente | 3 | ||
51.16 € | 1 |
Preventivo
Stock | 1/2 | Confezionamento sterile classe M3.5 Equivalente | 4 | ||
50.77 € | 1 | 26 giorni | 1/2 | Confezionamento standard equivalente alla classe M5.5 | 4 | ||
51.16 € | 1 | 26 giorni | 3/8 | Confezionamento sterile classe M3.5 Equivalente | 4 | ||
86.94 € | 1 | 26 giorni | 3/4 | Confezionamento sterile classe M3.5 Equivalente | 5 | ||
86.53 € | 1 | 26 giorni | 3/4 | Confezionamento standard equivalente alla classe M5.5 | 5 | ||
87.02 € | 1 | 26 giorni | 1/2 | Confezionamento sterile classe M3.5 Equivalente | 5 | ||
170.55 € | 1 | 4 giorni | 1 | Confezionamento sterile classe M3.5 Equivalente | 6 | ||
170.60 € | 1 | 26 giorni | 3/4 | Confezionamento sterile classe M3.5 Equivalente | 6 |
Loading...
Informazioni di base
| Tipo | Fitting Body | Materiale corpo principale | PFA | Tipo di collegamento | Pipe⇔Pipe, same diameters connection |
|---|---|---|---|---|---|
| Raccordo tubo-tubo con diam. uguale | Union Elbow | Max. temperatura d'esercizio(°C) | 200 |
Configura
Stock
-
- Indicare solo prodotti a magazzino
Proprietà di base
-
D.E. tubo applicabile (pollici) D (D1)
-
Packaging
- Confezionamento sterile classe M3.5 Equivalente
- Confezionamento standard equivalente alla classe M5.5
-
Size of Body
- 1
- 2
- 3
- 4
- 5
- 6
-
Tipo
- LQ1□□□-□□-□
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- Stesso giorno
- 4 giorni o meno
- 26 giorni o meno
Attributi opzionali
- Product images may be representative images. Refer to the catalog for details.
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.