KQG2W, Raccordi istantanei in acciaio inox 316, D'estremità a gomito prolungato (KQG2W04-M5)
- In Offerta fino al 30/11/2024
Dettagli del prodotto:
Codice articolo del costruttore: KQG2W04-M5
Marca: SMC
Prezzo: 21.24 €
Tempi di consegna: 4 giorni
Dati Tecnici:
D.E.1 tubo applicabile: 4 φ
Connection Type: M
Connection screw: 5×0.8
(i)Nota
- Le immagini dei prodotti possono essere immagini rappresentative. Fare riferimento al catalogo per i dettagli.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
KQG2W04-M5
Long Elbow Union Fitting: KQG2W Specifications
Millimeter size type
· Applicable tube: millimeter size, Connection thread: M/R/Rc
KQG2W outline drawing (with M5)
KQG2W outline drawing (with R)
(Unit: mm)
| Applicable tubing outer diameter (mm) | Connection thread R, M | Model | H (width across flats) | øDNote 1) | L1 | L2 | A* | M | Effective cross-sectional areaNote 2) (mm2) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|
| ø3.2 | M5 ×; 0.8 | KQG2W23-M5 | 8 | 8.3 | 13.1 | 31.2 | 32.4 | 12 | 2.8 | 13 |
| 1/8 | KQG2W23-01S | 10 | 13.6 | 31.3 | 32.3 | 14.7 | ||||
| 1/4 | KQG2W23-02S | 14 | 35.1 | 34.5 | 33.1 | |||||
| ø4 | M5 ×; 0.8 | KQG2W04-M5 | 8 | 9.1 | 13.7 | 31.6 | 33.2 | 12.6 | 3 | 13.6 |
| 1/8 | KQG2W04-01S | 10 | 14.4 | 31.7 | 33.1 | 4 | 15.6 | |||
| 1/4 | KQG2W04-02S | 14 | 35.5 | 35.3 | 33.9 | |||||
| ø6 | M5 ×; 0.8 | KQG2W06-M5 | 8 | 11.4 | 14.7 | 32.7 | 35.4 | 13.6 | 3 | 15.5 |
| 1/8 | KQG2W06-01S | 10 | 15.9 | 32.8 | 10.9 | 17.2 | ||||
| 1/4 | KQG2W06-02S | 14 | 36.6 | 37.6 | 35.5 | |||||
| 3/8 | KQG2W06-03S | 17 | 38 | 38.6 | 57.4 | |||||
| ø8 | 1/8 | KQG2W08-01S | 12 | 13.7 | 18.6 | 37 | 40.7 | 16.1 | 20.5 | 28 |
| 1/4 | KQG2W08-02S | 14 | 19.1 | 40.2 | 42.3 | 37.7 | ||||
| 3/8 | KQG2W08-03S | 17 | 41.6 | 43.3 | 60.9 | |||||
| ø10 | 1/4 | KQG2W10-02S | 14 | 16.6 | 21 | 46.6 | 50.2 | 17 | 33.5 | 40.7 |
| 3/8 | KQG2W10-03S | 17 | 45.9 | 49.1 | 61.9 | |||||
| 1/2 | KQG2W10-04S | 22 | 50.1 | 52 | 117.3 | |||||
| ø12 | 1/4 | KQG2W12-02S | 14 | 18.7 | 22.6 | 47.7 | 52.3 | 18.6 | 47.7 | 44.6 |
| 3/8 | KQG2W12-03S | 17 | 23.6 | 49 | 53.2 | 56.3 | ||||
| 1/2 | KQG2W12-04S | 22 | 53.2 | 56.1 | 112.9 | |||||
| ø16 | 3/8 | KQG2W16-03S | 19 | 24.6 | 26.3 | 57.6 | 64.1 | 20.8 | 71 | 86.6 |
| 1/2 | KQG2W16-04S | 22 | 27.3 | 61.4 | 66.6 | 100 | 111.8 |
*Reference dimensions after screwing in R thread.
Note 1) øD represents maximum diameter.
Note 2) Values are those when using an FEP tube. Only the values of ø16 are those when using a nylon tube.
Inch size type
· Applicable tube: inch size, Connection thread: UNF/NPT
KQG2W outline drawing
(Unit: mm)
| Applicable tube outer diameter (inches) | Connection thread NPT | Model | H (width across flats) | øDNote 1) | L1 | L2 | A* | M | Effective cross-sectional areaNote 2) (mm2) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|
| ø1/8 " | 1/8 | KQG2W01-N01S | 12 | 8.3 | 13.6 | 31.6 | 32.5 | 12 | 2.8 | 21.5 |
| 1/4 | KQG2W01-N02S | 14 | 35.4 | 35.1 | 34.4 | |||||
| ø5/32 " | 1/8 | KQG2W03-N01S | 12 | 9.1 | 14.4 | 32 | 33.3 | 12.6 | 4 | 22.4 |
| 1/4 | KQG2W03-N02S | 14 | 35.8 | 35.9 | 35.2 | |||||
| ø1/4 " | 1/8 | KQG2W07-N01S | 12 | 11.7 | 15.9 | 33.3 | 35.9 | 13.5 | 10.9 | 24.1 |
| 1/4 | KQG2W07-N02S | 14 | 37.1 | 38.5 | 37 | |||||
| 3/8 | KQG2W07-N03S | 19 | 38.9 | 40 | 70.9 | |||||
| ø5/16 " | 1/8 | KQG2W09-N01S | 12 | 13.7 | 18.6 | 34.7 | 38.3 | 16.1 | 20.5 | 26.9 |
| 1/4 | KQG2W09-N02S | 14 | 19.1 | 40.2 | 42.6 | 38.7 | ||||
| 3/8 | KQG2W09-N03S | 19 | 42 | 44.1 | 74.7 | |||||
| ø3/8 " | 1/4 | KQG2W11-N02S | 14 | 16 | 21 | 47.2 | 50.8 | 16.6 | 33.5 | 41.8 |
| 3/8 | KQG2W11-N03S | 19 | 45.4 | 48.7 | 75.2 | |||||
| 1/2 | KQG2W11-N04S | 22 | 49.2 | 50.8 | 116.5 | |||||
| ø1/2 " | 1/4 | KQG2W13-N02S | 14 | 19.6 | 22.7 | 49 | 54.4 | 18.5 | 47.7 | 47.9 |
| 3/8 | KQG2W13-N03S | 19 | 23.7 | 50.7 | 55.8 | 75.3 | ||||
| 1/2 | KQG2W13-N04S | 22 | 54.5 | 57.9 | 118.3 |
*Reference dimensions after screwing in NPT thread.
Note 1) øD represents maximum diameter.
Note 2) Value of FEP tubing.
SUS316 One-Touch Pipe Fitting KQG2 Series Specifications
· Applicable tube materials: FEP, PFA, nylon, soft nylon Note 1), polyurethane, polyolefin
| Usable fluids | Air, water, steamNote 2) Note 3) |
|---|---|
| Operating pressure rangeNote 4) | -100 kPa to 1 MPaNote 5) |
| Proof pressure | 3.0 MPa |
| Ambient temperature and operating fluid temperatureNote 6) | -5 to 150°C (no freezing)Note 5) |
| Lubricant | Grease-free finish |
| Seal (thread portion) | With sealant |
Note 1) For soft nylon tube, water cannot be used.
Note 2) Confirm applicable tube separately.
Note 3) Using special FKM that is resistant to steam.
Note 4) It is not completely airtight, so please avoid use in leak testers, etc., where a vacuum is maintained.
Note 5) Please confirm operating pressure range and operating temperature range.
Note 6) Please equip an inner sleeve for the following conditions. (ø3.2, ø1/8 "are excluded)
· When using with fluids or in environments that have extreme temperature changes.
· When using at a high temperature.
Temperature conditions for equipping inner sleeve
| Tube used | Temperature |
|---|---|
| FEP tube / TH series | 80°C or more |
| Super PFA tube / TL series | 120°C or more |
KQG2 Series structure
KQG2 Series Structural Drawing
| Number | Part Name | Material |
|---|---|---|
| 1 | Release button | SUS316 |
| 2 | Guide 1 | SUS316 |
| 3 | Guide 2 | SUS316 |
| 4 | Chuck | SUS316 |
| 5 | Seal | Special FKM (fluorine coated) |
| 6 | Male Connector body | SUS316 |
| 7 | Male Elbow body | SUS316 |
| 8 | O-ring | Special FKM (fluorine coated) |
| 9 | Stud | SUS316 |
Codice componente
|
|---|
| KQG2W04-M5 |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | D.E.1 tubo applicabile (φ) | Connection Type | Connection screw | |
|---|---|---|---|---|---|---|---|
21.24 € | 1 | 4 giorni | 4 | M | 5×0.8 |
Loading...
Informazioni di base
| Tipo | Ad azione singola/filettatura | Tipo raccordo | Direzione di montaggio a vite | Liquido applicabile | Acqua / Aria |
|---|---|---|---|---|---|
| Materiale corpo principale | Acciaio inox (EN 1.4401 Equiv.) | Applicazione | Standard/Mini | Materiale filettatura | Acciaio inox (EN 1.4401 Equiv.) |
| Montaggio a vite, direzione | Gomito | Gomiti | Gomito triplo universale | Number of Connection Tubes(pc.) | 1 |
Si trova sulla pagina di KQG2W, Raccordi istantanei in acciaio inox 316, D'estremità a gomito prolungato, il codice articolo è il seguente: KQG2W04-M5.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto KQG2W04-M5.
Configura
Proprietà di base
-
Tipo
- KQG2W
-
D.E.1 tubo applicabile(φ)
-
Connection Type
- M
- NPT
- R
-
Connection screw
- 1/2
- 1/4
- 1/8
- 3/8
- 5×0.8
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- Stesso giorno
- 4 giorni o meno
- 26 giorni o meno
Attributi opzionali
- Product images may be representative images. Refer to the catalog for details.
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Tipologia prodotto
| Codice componente |
|---|
| KQG2W03-N01S |
| KQG2W04-01S |
| KQG2W04-02S |
| KQG2W06-01S |
| KQG2W06-02S |
| KQG2W06-03S |
| Codice componente | Prezzo unitario standard | Quantità minima d'ordine | Sconto volumi elevati | Giorni spedizione standard ? | D.E.1 tubo applicabile (φ) | Connection Type | Connection screw |
|---|---|---|---|---|---|---|---|
30.89 € | 1 | 26 giorni | - | NPT | 1/8 | ||
29.39 € | 1 | 4 giorni | 4 | R | 1/8 | ||
36.68 € | 1 | 4 giorni | 4 | R | 1/4 | ||
29.39 € | 1 |
Stesso giorno
Stock | 6 | R | 1/8 | ||
36.68 € | 1 | 4 giorni | 6 | R | 1/4 | ||
41.68 € | 1 | 4 giorni | 6 | R | 3/8 |
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.