Spina raccordo S serie KK130P

Spina raccordo S serie KK130P
An energy-saving type S coupler one-touch joint achieved through reduced losses in pressure.
[Features]
· Plug: Heat treated for reduced denting, deformation and wear.
· C factor: increased by 34% (R1/4 thread type, comparison with conventional product*.)
· Plug insertion force: reduced by 22% (20 N) (at 0.5 MPa, comparison with the conventional product*.)
· Lightweight: reduced by 14% (12 g) (comparison with the conventional product*.)
· * Conventional product: KK13 Series.
· One-touch fitting type has been standardized.
· Includes a locking mechanism (semi-standard) for preventing detachment due to unexpected impact, etc.
· The detents on the sleeve help maintain the lock position and release position.

(i)Nota

  • Refer to the catalog for product specs.
  • The product shown in the image may be a representative image. Refer to the catalog for product shapes and types.

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

S Coupler KK130 Series Plug specifications

Specifications

Operating fluid Air Note:
Operating pressure range 0 to 1.5 MPa
One-touch fitting type: 0 to 1.0 MPa
Guaranteed proof pressure 2.0 MPa
Ambient temperature and working fluid temperature -20 to 80°C (no freezing)
One-touch fitting type: -5 to 60°C (no freezing)
Plating Sleeve: electroless nickel plating
Other external metal parts: zinc chromate
Seal Includes male thread sealant

Note: Cannot be used for water.

Performance

Plug/socket connection method Sleeve-slide detachable type
Check valve Socket: built-in check valve
Flow direction Both directions
Sleeve lock mechanism Manual lock system (with detents), semi-standard

Flow rate characteristics (representative value)

S Coupler Plug (KK130P): related images

Flow rate characteristics

  • *Note: This flow rate characteristics testing method conforms to JIS B 8390 standards (Pneumatic fluid power – Components using compressible fluids – Determination of flow-rate characteristics.)
  • *Note: The figures are representative values when the same type of plug and socket are connected.
 
Connection type Sonic conductance
C [dm3/(s-bar)]
Critical pressure ratio
b
Flow coefficient
Cv
Effective area
S [mm2]
Type Symbol Connection
Male thread -01MS R1/8 4.2 0.4 1.2 21
-02MS R1/4 7.0 0.4 1.9 35
-03MS R3/8 7.0 0.5 2.1 35
-04MS R1/2 7.0 0.5 2.1 35
Female thread -01F Rc1/8 6.0 0.5 1.8 30
-02F Rc1/4 7.0 0.5 2.1 35
-03F Rc3/8 7.0 0.5 2.1 35
-04F Rc1/2 7.0 0.5 2.1 35
With barb fitting -07B 6 (1/4 ") 2.0 0.4 0.5 10
-09B 8 (1/4 ") 3.0 0.4 0.8 15
-11B 10 (3/8 ") 6.0 0.5 1.8 30
-13B 12 (1/2 ") 7.0 0.5 2.1 35
With nut fitting -50N 5/8 2.0 0.4 0.5 10
-60N 6/9 3.5 0.4 1.0 18
-65N 6.5/10 4.2 0.4 1.2 21
-80N 8/12 7.0 0.4 1.9 35
-85N 8.5/12.5 7.0 0.4 1.9 35
-110N 11/16 7.0 0.5 2.1 35
With one-touch fitting -06H ø6 2.0 0.4 0.5 10
-08H ø8 4.4 0.5 1.3 22
-10H ø10 7.0 0.5 1.8 35
-12H ø12 7.0 0.5 2.1 35

Male Thread Type outline dimensional drawing

S Coupler Plug (KK130P): related images

Plug - Male Thread Type external appearance

S Coupler Plug (KK130P): related images

Plug - Male Thread Type dimensional drawing

S Coupler Plug (KK130P): related images

Plug - Male Thread Type dimensional drawing (with socket connection)

Model T
Connection male thread
H
Width across flats
L1L2A *1 Minimum hole diameter Weight g When connected
Overall length L3
KK130P-01MS R1/8 14 34.0 11.1 30.0 6.0 18 51.1
KK130P-02MS R1/4 14 38.0 13.1 32.0 8.0 22 53.9
KK130P-03MS R3/8 19 39.0 13.6 32.5 8.0 37 53.3
KK130P-04MS R1/2 22 43.0 16.1 35.0 8.0 52 55.9
KK130P-N01MS NPT1/8 14 34.0 10.1 29.0 6.0 18 49.4
KK130P-N02MS NPT1/4 14 38.0 11.6 30.5 8.0 22 51.5
KK130P-N03MS NPT3/8 19 39.0 12.6 31.5 8.0 37 51.7
KK130P-N04MS NPT1/2 22 43.0 14.1 33.0 8.0 52 52.3

Units: mm
*1: Reference dimensions after screwing in.

Female Thread Type outline dimensional drawing

S Coupler Plug (KK130P): related images

Plug - Female Thread Type external appearance

S Coupler Plug (KK130P): related images

Plug - Female Thread Type dimensional drawing

S Coupler Plug (KK130P): related images

Plug - Female Thread Type dimensional drawing (with socket connection)

Model T
Connection male thread
H
Width across flats
L1L2Minimum hole diameter Weight g When connected
Overall length L3
KK130P-01F Rc1/8 14 30.0 11.1 8.0 18 53.0
KK130P-02F Rc1/4 17 36.0 17.1 8.0 28 62.5
KK130P-03F Rc3/8 21 37.0 18.1 8.0 38 66.5
KK130P-04F Rc1/2 27 42.0 23.1 8.0 73 76.0
KK130P-N01F NPT1/8 14 30.0 11.1 8.0 18 53.0
KK130P-N02F NPT1/4 17 36.0 17.1 8.0 28 62.5
KK130P-N03F NPT3/8 21 37.0 18.1 8.0 38 66.5
KK130P-N04F NPT1/2 27 42.0 23.1 8.0 73 76.0

Unit: mm

Barb Fitting Type (For Rubber Hoses) outline dimensional drawing

S Coupler Plug (KK130P): related images

Plug - Barb Fitting Type (For Rubber Hoses) external appearance

S Coupler Plug (KK130P): related images

Barb Fitting Type (For Rubber Hoses) dimensional drawing

S Coupler Plug (KK130P): related images

Barb Fitting Type (For Rubber Hoses) dimensional drawing (with socket connection)

Model Nominal of hose øD1øD2L1L2Minimum hole diameter Weight g When connected
Overall length L3
KK130P-07B 6 (1/4 ") 7.2 14.0 46.0 27.1 4.5 16 88.0
KK130P-09B 8 (1/4 ") 9.0 15.0 46.0 27.1 5.0 19 87.5
KK130P-11B 9 (3/8 ") 11.3 16.0 46.0 27.1 8.0 19 87.0
KK130P-13B 12 (1/2 ") 15.0 18.0 46.0 27.1 8.0 33 86.0

Unit: mm

  • *The values within () represent the internal diameter of applicable hoses.
  • *Note: Refer to the manufacturer's catalog for specifications other than those above.
Codice componente
KK130P-01F
KK130P-01MS
KK130P-02F
KK130P-02MS
KK130P-03F
KK130P-03MS
KK130P-04F
KK130P-04MS
KK130P-06H
KK130P-08H
KK130P-09B
KK130P-10H
KK130P-11B
KK130P-12H
KK130P-13B
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Tipo giunto Gamma di temperature di esercizio
(°C)
Pipe Connection Bore Dia. Nominal Designation of Hose
(mm / (Inch))
Compatible Tube Outer Diameter
(mm)

2.45 €

5 4 giorni Female Threaded Tapped-20~80Rc1/8--

2.45 €

5 4 giorni Threaded Type-20~80R1/8--

2.45 €

5 4 giorni Female Threaded Tapped-20~80Rc1/4--

2.45 €

5 Stesso giorno

Stock

Threaded Type-20~80R1/4--

2.45 €

5 4 giorni Female Threaded Tapped-20~80Rc3/8--

2.45 €

5 4 giorni Threaded Type-20~80R3/8--

4.15 €

5 4 giorni Female Threaded Tapped-20~80Rc1/2--

4.15 €

5 Stesso giorno

Stock

Threaded Type-20~80R1/2--

5.74 €

5 4 giorni With One-Touch Couplings---6

5.74 €

5 4 giorni With One-Touch Couplings---8

2.45 €

5 4 giorni [For hose mounting] 00042-20~80-8 (1/4")-

7.18 €

5 4 giorni With One-Touch Couplings---10

2.45 €

5 4 giorni [For hose mounting] 00042-20~80-9 (3/8")-

7.18 €

5 4 giorni With One-Touch Couplings---12

4.15 €

5 4 giorni [For hose mounting] 00042-20~80-12 (1/2")-

Loading...

  1. 1

Informazioni di base

Tipo Standard Maschio/Femmina Plug Materiale corpo principale Steel for construction
Liquido applicabile Air Struttura valvola Single Passage Opening Closing Type Ambiente d'esercizio, applicazioni Standard
With or Without Check Valve No

Supporto tecnico