• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Presa raccordo S serie KK130S

Presa raccordo S serie KK130S

SMC

SMC

An energy-saving type S coupler one-touch joint achieved through reduced losses in pressure.
[Features]
· Air consumption amount can be reduced and costs kept down by reducing the compressor's power consumption.
· 12‑g lighter than the conventional product.
· The plug insertion force has been reduced by 20 N in comparison to the conventional product (at 0.5 MPa.)
· The C factor has been increased by 34% in comparison to the conventional product (R1/4 thread type.)

(i)Nota

  • Refer to the catalog for product specs.
  • The product shown in the image may be a representative image. Refer to the catalog for product shapes and types.

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

S Coupler KK130 Socket specifications

Common specifications

Operating fluid Air Note:
Operating pressure range 0 to 1.5 MPa
One-touch fitting type: 0 to 1.0 MPa
Guaranteed proof pressure 2.0 MPa
Ambient temperature and working fluid temperature -20 to 80°C (no freezing)
One-touch fitting type: -5 to 60°C (no freezing)
Plating Sleeve: electroless nickel plating
Other external metal parts: zinc chromate
Seal Includes male thread sealant

Note: Cannot be used for water.

Common performance

Plug/socket connection method Sleeve-slide detachable type
Check valve Socket: built-in check valve
Flow direction Both directions
Sleeve lock mechanism Manual lock system (with detents), semi-standard

Male thread type

Male Thread Type external appearance

Male Thread Type external appearance

Male Thread Type dimensional drawing (Units: mm)

Male Thread Type dimensional drawing (Units: mm)

Model T
Connection male thread 		H
Width across flats 		L1A *1 Minimum hole diameter Weight
g
KK130S(L)-01MS R1/8 22 44.0 40.0 6.0 73
KK130S(L)-02MS R1/4 22 46.8 40.8 8.5 74
KK130S(L)-03MS R3/8 22 46.2 39.7 8.5 82
KK130S(L)-04MS R1/2 22 47.8 39.8 14.0 83
KK130S(L)-N01MS NPT1/8 22 44.3 39.3 6.0 73
KK130S(L)-N02MS NPT1/4 22 47.4 39.9 8.5 74
KK130S(L)-N03MS NPT3/8 22 46.6 39.1 8.5 82
KK130S(L)-N04MS NPT1/2 22 48.2 38.2 14.0 83

Unit: mm

  1. *1: Reference dimensions after screwing in

Female thread type

Female Thread Type external appearance

Female Thread Type external appearance

Female Thread Type dimensional drawing (Units: mm)

Female Thread Type dimensional drawing (Units: mm)

Model T
Connection male thread 		H
Width across flats 		L1Minimum hole diameter Weight
g
KK130S(L)-01F Rc1/8 22 41.9 8.0 90
KK130S(L)-02F Rc1/4 22 45.4 11.0 92
KK130S(L)-03F Rc3/8 22 48.4 11.0 91
KK130S(L)-04F Rc1/2 27 52.9 14.0 117
KK130S(L)-N01F NPT1/8 22 41.9 8.0 90
KK130S(L)-N02F NPT1/4 22 45.4 11.0 92
KK130S(L)-N03F NPT3/8 22 48.4 11.0 91
KK130S(L)-N04F NPT1/2 27 52.9 14.0 117

Unit: mm

Barb fitting type (for rubber hoses)

Barb Fitting Type (For Rubber Hoses) external appearance

Barb Fitting Type (For Rubber Hoses) external appearance

Barb Fitting Type (For Rubber Hoses) dimensional drawing (Units: mm)

Barb Fitting Type (For Rubber Hoses) dimensional drawing (Units: mm)

Model Nominal of hose øD1L1Minimum hole diameter Weight g
KK130S(L)-07B 6 (1/4 ") 7.2 60.9 4.5 70
KK130S(L)-09B 8 (1/4 ") 9.0 60.4 5.0 72
KK130S(L)-11B 9 (3/8 ") 11.3 59.9 7.7 73
KK130S(L)-13B 12 (1/2 ") 15.0 58.9 9.0 81

Unit: mm
*The values within () represent the internal diameter of applicable hoses

Nut Fitting Type (For Fiber Reinforced Urethane Hose)

Nut Fitting Type (For Fiber Reinforced Urethane Hose) external appearance

Nut Fitting Type (For Fiber Reinforced Urethane Hose) external appearance

Nut Fitting Type (For Fiber Reinforced Urethane Hose) dimensional drawing (Units: mm)

Nut Fitting Type (For Fiber Reinforced Urethane Hose) dimensional drawing (Units: mm)

Model Applicable hose
Internal diameter / outer diameter 		H1H2L1M Minimum hole diameter Weight g
KK130S(L)-50N 5/8 22 14 49.6 13.7 4.5 85
KK130S(L)-60N 6/9 22 17 51.6 16.4 5.5 95
KK130S(L)-65N 6.5/10 22 17 51.6 16.5 6.0 92
KK130S(L)-80N 8/12 22 19 52.6 17.4 8.0 97
KK130S(L)-85N 8.5/12.5 22 19 52.6 17.4 8.0 101
KK130S(L)-110N 11/16 24 24 52.6 20.1 10.0 119

Unit: mm

One-touch fitting type

One-Touch Fitting Type external appearance

One-Touch Fitting Type external appearance

One-Touch Fitting Type dimensional drawing (Units: mm)

One-Touch Fitting Type dimensional drawing (Units: mm)

Model Applicable tube outer diameter mm D L1M Minimum hole diameter Weight g
KK130S(L)-06H 6 13.0 52.3 16.7 4.5 72
KK130S(L)-08H 8 14.8 53.3 18.6 6.0 74
KK130S(L)-10H 10 17.8 55.3 20.7 9.0 77
KK130S(L)-12H 12 20.0 55.3 21.7 9.0 80
KK130S(L)-07H 1/4 "13.0 52.3 16.7 4.5 72
KK130S(L)-09H 5/16 "14.8 53.3 18.6 6.0 74
KK130S(L)-11H 3/8 "17.6 55.3 20.7 7.0 79
KK130S(L)-13H 1/2 "20.0 55.3 21.7 9.0 78

Unit: mm

*Refer to the manufacturer's catalog for specifications other than those above.

Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
KK130S-01F
KK130S-01MS
KK130S-02F
KK130S-02MS
KK130S-03F
KK130S-03MS
KK130S-04F
KK130S-04MS
KK130S-06H
KK130S-08H
KK130S-10H
KK130S-11B
KK130S-12H
KK130S-13B
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Tipo giunto Gamma di temperature di esercizio
(°C) 		Pipe Connection Bore Dia. Nominal Designation of Hose
(mm / (Inch)) 		Compatible Tube Outer Diameter
(mm)

9.16 €

5 4 giorni Female Threaded Tapped-20～80Rc1/8--

9.16 €

5 4 giorni Threaded Type-20～80R1/8--

9.16 €

5 4 giorni Female Threaded Tapped-20～80Rc1/4--

9.16 €

5 4 giorni Threaded Type-20～80R1/4--

9.16 €

5 4 giorni Female Threaded Tapped-20～80Rc3/8--

9.16 €

5 4 giorni Threaded Type-20～80R3/8--

12.02 €

5 4 giorni Female Threaded Tapped-20～80Rc1/2--

12.02 €

5 4 giorni Threaded Type-20～80R1/2--

13.15 €

5 7 giorni With One-Touch Couplings---6

13.15 €

5 4 giorni With One-Touch Couplings---8

13.77 €

5 4 giorni With One-Touch Couplings---10

9.16 €

5 Stesso giorno

Stock

[For hose mounting] 00042-20～80-9 (3/8")-

14.90 €

5 4 giorni With One-Touch Couplings---12

12.02 €

5 4 giorni [For hose mounting] 00042-20～80-12 (1/2")-

Loading...

  1. 1
 

Informazioni di base

Tipo Standard Maschio/Femmina Attacco Materiale corpo principale Steel for construction
Liquido applicabile Air Struttura valvola Single Passage Opening Closing Type Ambiente d'esercizio, applicazioni Standard
With or Without Check Valve Sì

Configura

Ripristina

14Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Stock

Proprietà di base

  • Tipo giunto

    • Threaded Type
    • Female Threaded Tapped
    • With One-Touch Couplings
    • For hose mounting
      • 00042

    Ripristina

  • Pipe Connection Bore Dia.

    • R1/2
    • Rc1/2
    • R1/4
    • Rc1/4
    • R1/8
    • Rc1/8
    • R3/8
    • Rc3/8

    Ripristina

  • Nominal Designation of Hose(mm / (Inch))

    • 9 (3/8")
    • 12 (1/2")

    Ripristina

  • Compatible Tube Outer Diameter(mm)

    • 6
    • 8
    • 10
    • 12

    Ripristina

  • Tipo

    • KK130□-□B
    • KK130□-□F
    • KK130□-□H
    • KK130□-□MS

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Filtrare per giorni di spedizione standard

    • Tutti gli articoli
    • Stesso giorno
    • 4 giorni o meno
    • 7 giorni o meno

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.