• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

C(D)G3 Cilindro pneumatico, doppio effetto, stelo semplice, Modello compatto (CDG3BN32-60F)

C(D)G3 Cilindro pneumatico, doppio effetto, stelo semplice, Modello compatto CDG3BN32-60F

SMC

SMC

Dettagli del prodotto:

Codice articolo del costruttore: CDG3BN32-60F

Marca: SMC

Prezzo: 48.68 €

Tempi di consegna: 26 giorni


Dati Tecnici:

D.I. cilindro: D: 32 Ø

Corsa: L: - mm

Specifications: Magnete incorporato

Auto Switch: Senza interruttore automatico

Lead Wire Length: - m


(i)Nota

  • ■ SMC Product Line
    Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
  • Refer to the manufacturer's catalog for specification and material details.
  • Product images may be representative images. Refer to the manufacturer's catalog for shape details.​
  • CAD data is not supported for some model numbers.

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

CDG3BN32-60F

Air Cylinder, Short Type, Standard, Double Acting, Single Rod CG3 Series Specifications

Air Cylinder, Short Type, Standard, Double Acting, Single Rod CG3 Series external appearance

Air Cylinder, Short Type, Standard, Double Acting, Single Rod CG3 Series external appearance

JIS symbol (rubber bumper)

JIS symbol (rubber bumper)

Specifications

Tube Inner Diameter (mm) 20 25 32 40 50 63 80 100
Action Double acting, single rod
Lubrication Not required (non-lubricated)
Fluid Air
Proof Pressure 1.0 MPa
Maximum operating pressure 0.7 MPa
Minimum operating pressure 0.05 MPa
Ambient and Fluid Temperature Without auto switch: -10°C to 70°C (No freezing)
With auto switch: -10°C to 60°C (No freezing)
Piston Speed 50 to 1,000 mm/s 30 to 700 mm/s
Stroke Length Tolerance 0 to +1.4 mm
Cushioning Rubber cushion
Mount Support Type Basic type, foot type, rod-end flange type,
head-end flange type, clevis type
Allowable Kinetic
Energy 		Rod end male thread 0.2 J 0.29 J 0.46 J 0.84 J 1.4 J 2.38 J 4.13 J 6.93 J
Rod end female thread 0.11 J 0.18 J 0.29 J 0.52 J 0.91 J 1.54 J 2.71 J 4.54 J

*Only use the cylinder within the allowable kinetic energy range. See the SMC catalog for details.

Stroke Table

Tube Inner Diameter (mm) Standard Stroke (mm)*
20 25, 50, 75, 100, 125, 150, 200
25 25, 50, 75, 100, 125, 150, 200, 250, 300
32
40
50
63
80
100

*Contact the SMC support center regarding intermediate strokes of 1‑mm increments. (Spacers are not used.)

Theoretical Output Table

 

(Unit: N)

 

Tube Internal Diameter
D (mm) 		Rod Diameter
d (mm) 		Operating Direction Piston Area
(mm2) 		Operating Pressure (MPa)
0.2 0.3 0.4 0.5 0.6 0.7
20 8 OUT 314 62.8 94.2 125.6 157 188.4 219.8
IN 264 52.8 79.2 105.6 132 158.4 184.8
25 10 OUT 491 98.2 147.3 196.4 245.5 294.6 343.7
IN 412 82.4 123.6 164.8 206 247.2 288.4
32 12 OUT 804 160.8 241.2 321.6 402 482.4 562.8
IN 691 138.2 207.3 276.4 345.5 414.6 483.7
40 14 OUT 1,257 251.4 377.1 502.8 628.5 754.2 879.9
IN 1,103 220.6 330.9 441.2 551.5 661.8 772.1
50 18 OUT 1,964 392.8 589.2 785.6 982 1,178.4 1,374.8
IN 1,709 341.8 512.7 683.6 854.5 1,025.4 1,196.3
63 18 OUT 3,117 623.4 935.1 1,246.8 1,558.5 1,870.2 2,181.9
IN 2,863 572.6 858.9 1,145.2 1,431.5 1,717.8 2,004.1
80 22 OUT 5,027 1,005.4 1,508.1 2,010.8 2,513.5 3,016.2 3,518.9
IN 4,646 929.2 1,393.8 1,858.4 2,323 2,787.6 3,252.2
100 26 OUT 7,854 1,570.8 2,356.2 3,141.6 3,927 4,712.4 5,497.8
IN 7,323 1,464.6 2,196.9 2,929.2 3,661.5 4,393.8 5,126.1

*Theoretical output (N) = Pressure (MPa) ×; Piston area (mm2).

Weight Table

 

(Unit: kg)

 

Tube Inner Diameter (mm) 20 25 32 40 50 63 80 100
Basic weight Basic type 0.09 0.14 0.20 0.32 0.66 0.92 1.75 2.74
Rod-End Long Type (G) 0.10 0.15 0.21 0.34 0.70 0.97 1.84 2.85
Rod End Female Thread Type (F) 0.08 0.12 0.19 0.29 0.60 0.85 1.61 2.53
Additional Bracket Weight Foot type 0.11 0.13 0.16 0.22 0.48 0.72 0.96 1.75
Flange type 0.08 0.10 0.14 0.20 0.34 0.50 0.71 1.35
Clevis Type 0.05 0.08 0.15 0.23 0.40 0.68 0.71 1.28
Pivot bracket 0.08 0.09 0.17 0.25 0.44 0.80 0.98 1.75
Single Knuckle Joint 0.05 0.09 0.09 0.10 0.22 0.22 0.39 0.57
Double knuckle joint (with pin) 0.05 0.09 0.09 0.13 0.26 0.26 0.64 1.31
Additional weight per 50 strokes 0.05 0.07 0.09 0.13 0.19 0.23 0.31 0.43
Additional Switch Magnet Weight 0.01 0.01 0.01 0.01 0.01 0.02 0.02 0.04

Calculation Example) CDG3FN20-100 (built-in magnet, flange type, ø20 mm, 100 stroke)

  • Basic weight: 0.09 kg (basic type, ø20 mm)
  • Additional bracket weight: 0.08 kg (flange type)
  • Additional stroke weight: 0.05 kg / 50 mm
  • Air cylinder stroke: 100 mm
  • Additional switch magnet weight: 0.01 kg

0.09 + 0.08 + 0.05 ×; (100/50) + 0.01 = 0.28 kg

Mounting Procedure

Mounting procedure for clevis: (ø20 to 63 mm)

Mounting procedure for clevis: (ø20 to 63 mm)

Mounting procedure for clevis: (ø80 to 100 mm)

Mounting procedure for clevis: (ø80 to 100 mm)

Mounting procedure for rod end nut

Mounting procedure for rod end nut

  1. *1: Tighten the clevis bracket mounting bolts to the proper tightening torques detailed below.
    　　ø20 mm: 1.5 N·m, ø25 to 32 mm: 2.9 N·m, ø40 mm: 4.9 N·m
    　　ø50 mm: 11.8 N·m, ø63 to 80 mm: 24.5 N·m, ø100 mm: 42.2 N·m
  2. *2: Mount the flange type and foot type so that the distance 't' (clearance) of the rod end nut is at least 1 mm.
  3. *3: The direction of the rod end nut (for male thread) when mounting should be with the hexagonal part at the rod end. Apply the wrench to the hexagonal part.

Diagram

With rubber bumper diagram

With rubber bumper diagram

Number Name Material Notes
1 Rod cover Aluminum alloy Hard anodized aluminum
2 Tube Cover Aluminum alloy Hard anodized aluminum
3 Piston Aluminum alloy Chromate
4 Piston rod Carbon steel* Hard chrome plated*
5 Bushing Resin/Copper alloy (Multiple layers) -
6 Bumper A Resin -
7 Damper B Resin -
8 Wear Ring Resin -
9 Rod End Nut Carbon steel Nickel plated
10 Rod seal NBR -
11 Piston Seal NBR -
12 Tube Gasket NBR -

*For cylinders with auto switches, a magnet is attached to the piston.
*The material for ø20 mm and ø25 mm cylinders with auto switches is stainless steel.

Dimensions

 

(Units: mm)

 

Basic type / CG3BN tube inner diameter, stroke, with rubber bumper dimensional drawing

Basic type / CG3BN tube inner diameter, stroke, with rubber bumper dimensional drawing

 
Rod-end female thread / Long rod-end male thread dimensional drawing

Rod-end female thread / Long rod-end male thread dimensional drawing

 
Foot type / CG3LN tube inner diameter, stroke, with rubber bumper dimensional drawing

Foot type / CG3LN tube inner diameter, stroke, with rubber bumper dimensional drawing

  • *See the manufacturer's catalog for dimensional drawings and values other than those provided above.
Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
CDG3BN32-60F
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
D.I. cilindro: D
(Ø) 		Corsa: L
(mm) 		Specifications Auto Switch Lead Wire Length
(m) 		Number of Switches Type of Mount Support Rod Tip Shape Tipo di connettore Staffa di montaggio interruttore automatico

48.68 €

1 26 giorni 32-Magnete incorporatoSenza interruttore automatico--Tipo baseFilettatura femminaAssenteN/A

Loading...

  1. 1
 

Informazioni di base

Metodo di funzionamento cilindro A doppia azione Metodo di funzionamento asta Aste singole Profilo corpo principale Standard
Funzione aggiuntiva Standard Ambiente, applicazioni Standard Cushion Smorzatore in gomma
Operating Pressure(MPa) 0.05–0.7

Si trova sulla pagina di C(D)G3 Cilindro pneumatico, doppio effetto, stelo semplice, Modello compatto, il codice articolo è il seguente: CDG3BN32-60F.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto CDG3BN32-60F.

Configura

Ripristina

1Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Corsa: L(mm)

    • 25
    • 49
    • 50
    • 52
    • 53
    • 54
    • 59
    • 68
    • 74
    • 75
    • 100
    • 125
    • 147
    • 150
    • 177
    • 252
    • 730

    Ripristina

  • Lead Wire Length(m)

    • 0,5 (connettore a spina M8 a 3 pin)
    • 0.5
    • 3
    • 5

    Ripristina

  • Number of Switches

    • 1
    • 2
    • 3

    Ripristina

  • Tipo

    • CDG3
    • CG3

    Ripristina

  • D.I. cilindro: D(Ø)

    • 20
    • 25
    • 32
    • 40
    • 50
    • 63
    • 80
    • 100

    Ripristina

  • Specifications

    • Magnete incorporato
    • Senza magnete

    Ripristina

  • Auto Switch

    • H7C
    • M9B
    • M9BW
    • M9NW
    • M9P
    • M9PW
    • B54
    • C73C
    • A93
    • A96
    • Senza interruttore
    • Senza interruttore automatico

    Ripristina

  • Type of Mount Support

    • Con piede
    • Flangia lato testa
    • Piede
    • Profilo perno
    • Tipo base
    • Tipo flangia estremità asta

    Ripristina

  • Rod Tip Shape

    • Filettatura femmina
    • Filettatura maschio
    • Filetto maschio, lungo

    Ripristina

  • Tipo di connettore

    • Connettore spina 3 pin M8
    • Connettore maschio M12 4 pin
    • Assente

    Ripristina

  • Staffa di montaggio interruttore automatico

    • Disponibile
    • N/A

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Filtrare per giorni di spedizione standard

    • Tutti gli articoli
    • 4 giorni o meno
    • 16 giorni o meno
    • 17 giorni o meno
    • 26 giorni o meno

    Ripristina

Attributi opzionali

Tipologia prodotto

Codice componente
CDG3BN100-125
CDG3BN100-125F
CDG3BN100-150
CDG3BN32-60G
CDG3BN32-70
CDG3BN32-70F
Codice componentePrezzo unitario standardQuantità minima d'ordineSconto volumi elevatiGiorni
spedizione standard
?		D.I. cilindro: D
(Ø) 		Corsa: L
(mm) 		Specifications Auto Switch Lead Wire Length
(m) 		Number of Switches Type of Mount Support Rod Tip Shape Tipo di connettore Staffa di montaggio interruttore automatico

209.82 €

1 26 giorni 100-Magnete incorporatoSenza interruttore--Tipo baseFilettatura maschio--

209.82 €

1 26 giorni 100-Magnete incorporatoSenza interruttore--Tipo baseFilettatura femmina--

217.19 €

1 26 giorni 100-Magnete incorporatoSenza interruttore--Tipo baseFilettatura maschio--

48.68 €

1 26 giorni 32-Magnete incorporatoSenza interruttore--Tipo baseFiletto maschio, lungo--

48.68 €

1 26 giorni 32-Magnete incorporatoSenza interruttore--Tipo baseFilettatura maschio--

48.68 €

1 26 giorni 32-Magnete incorporatoSenza interruttore--Tipo baseFilettatura femmina--

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.