Confermato
- D.I. cilindro: D(Ø)
- 80
- Ambiente, applicazioni
- Valvole
- Specifications
- Port thread type
- Type of Mount Support
- Custom-made Specifications
- Material of Gasket
- Tipo
- CAD
- 2D
- 3D
- Giorni di spedizione est.
- Tutti
- Entro 7 giorni lavorativi
C(D)G5-S, cilindro acciaio inox, doppio effetto, stelo semplice (CG5BA80SR-200)
Informazioni sul prodotto
Stainless Steel Cylinder CG5-S Series Specifications
Stainless Steel Cylinder CG5-S Series external appearance
JIS symbol: Double acting / Single rod, rubber bumper
JIS symbol air cushion
Specifications
| Tube Inner Diameter (mm) | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 |
|---|---|---|---|---|---|---|---|---|
| Action | Double acting, single rod | |||||||
| Fluid | Air | |||||||
| Proof Pressure | 1.5 MPa | |||||||
| Maximum operating pressure | 1.0 MPa | |||||||
| Minimum operating pressure | 0.05 MPa | |||||||
| Ambient and Fluid Temperature | Without auto switch: -10 to 70°C, With auto switch: -10 to 60°C | |||||||
| Cushioning | Rubber bumper, air cushion | |||||||
| Lubrication | Not required (non-lubricated) | |||||||
| Piston Speed | 50 to 1,000 mm/s | 50 to 700 mm/s | ||||||
| Stroke Length Tolerance | Up to 1,000st(0 to +1.4) mm, Up to 1,200st(0 to +1.8) mm | Up to 1,000 (st0 to +1.4) mm, Up to 15,000 (st0 to +1.8) mm | ||||||
| Mount Support Type | Basic type, axial foot type, rod-end flange type, head-end flange type, integrated clevis type | |||||||
Standard Stroke Table
(Units: mm)
| Tube Internal Diameter | Standard Stroke | Long stroke | Maximum Manufacturable Stroke |
|---|---|---|---|
| 20 | 25, 50, 75, 100, 125, 150, 200 | 201 to 350 | 1,500 |
| 25 | 25, 50, 75, 100, 125, 150, 200, 250, 300 | 301 to 400 | |
| 32 | 301 to 450 | ||
| 40 | 301 to 800 | ||
| 50/63 | 301 to 1,200 | ||
| 80 | 301 to 1,400 | ||
| 100 | 301 to 1,500 |
- *Consult with SMC regarding intermediate strokes of 1‑mm increments. (Spacers are not used.)
- *Long stroke applies to the axial foot type and rod-end flange types. In the case of other mounting brackets or when the long stroke limits are exceeded, the maximum usable stroke is determined by the stroke selection table (front mounting parts, CG1).
Diagram
With rubber bumper diagram
With air cushion, diagram
| Number | Name | Material | |
|---|---|---|---|
| 1 | Rod cover | SUS304 | |
| 2 | Head cover | SUS304 | |
| 3 | Cylinder Tubing | SUS304 | |
| 4 | Piston rod | SUS304 | Hard chrome plating |
| 5 | Damper | Urethane | |
| 6 | Rod End Nut | SUS304 | |
| 7 | Cushion Seal | Urethane | |
| 14 | Cushion Valve | SUS304 | |
| 15 | Valve Retainer | SUS304 | |
| 16 | Lock Nut | SUS304 | |
| 17 | Bushing | Resin/Copper alloy (Multiple layers) | |
| 18 | Piston | Aluminum alloy | |
| 19 | Wear Ring | Resin | |
| 20 | Cushion Ring | Aluminum alloy | |
*1: The material and surface treatment of component parts other than those listed above are the same as the standard type in the CG1 Series.
*2: For cylinders with auto switches, a magnet is attached to the piston.
| Number | Name | Material | |
|---|---|---|---|
| CG5□□□SR | CG5□□□SV | ||
| 8 | Water-Resistant Scraper | NBR | FKM |
| 9 | Rod Seal | ||
| 10 | Piston Seal | ||
| 11 | Valve Seal | ||
| 12 | Valve Retainer Gasket | ||
| 21 | Piston Gasket | ||
| 22 | Cushion Ring Gasket | ||
| 13 | Label Protective Sheet | PET | |
Replacement Parts / Seal Kit
| Tube Internal Diameter (mm) | Rubber bumper | Air cushion | ||
|---|---|---|---|---|
| CG5□N□SR | CG5□N□SV | CG5□A□SR | CG5□A□SV | |
| 20 | CG5N20SR-PS | CG5N20SV-PS | CG5A20SR-PS | CG5A20SV-PS |
| 25 | CG5N25SR-PS | CG5N25SV-PS | CG5A25SR-PS | CG5A25SV-PS |
| 32 | CG5N32SR-PS | CG5N32SV-PS | CG5A32SR-PS | CG5A32SV-PS |
| 40 | CG5N40SR-PS | CG5N40SV-PS | CG5A40SR-PS | CG5A40SV-PS |
| Contents | Set of (9) and (10) from above | Set of (9), (10), (11) and (12) from above | ||
- *ø50 mm and above cannot be disassembled, so the seal cannot be replaced.
- *The seal kit includes a grease pack (10 g). Contact SMC if it is necessary to order a grease pack separately.
- *See the SMC catalog for specifications, dimensions and other such information not detailed above.
Ulteriori informazioni
Informazioni di base
A standard cylinder suitable for use in environments in which there is splashing water such as for food processing machinery.
[Features]
· All stainless steel specification (external parts).
· Choice of 2 types of gasket seal material.
· External configuration which reduces liquid pooling.
*See the SMC catalog for specification details.
*Product pictures are representative images. CAD data is not supported for some model numbers.
Attenzione
- ■ Linea di prodotti SMC
Le pagine Web per i prodotti attualmente privi di singole pagine su questo sito verranno rilasciate su base ad hoc. - Le immagini dei prodotti possono essere immagini rappresentative. Fare riferimento al catalogo del produttore per i dettagli sulla forma.
- I dati CAD non sono supportati per alcuni numeri di modello.
Il codice componente è stato confermato