Cerniere ad angolo / filettatura femmina / zinco / GN 161.2 / GANTER
- Sconto volumi elevati
During the load tests, the hinges were gradually loaded and relieved at room temperature with incrementally increasing force. For the specified values, an insignificant permanent deformation remained after relieving the load which had no effect on the function and appearance. In most cases, the failure loads are multiples of the specified value.
The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use. Environmental influences and aging may influence these values.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
Codice componente
|
|---|
| 161.2-32-63-L-SR |
| 161.2-32-63-L-SW |
| 161.2-32-63-R-SR |
| 161.2-32-63-R-SW |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Type | Finish | Weight (kg) | |
|---|---|---|---|---|---|---|---|
10.88 € | 1 | Disponibile | 5 giorni | L-fixed bearing (pin) left | SR-silver, RAL 9006, textured finish - silver, RAL 9006, textured finish | 0.125 | |
10.88 € | 1 | Disponibile | 5 giorni | L-fixed bearing (pin) left | SW-black, RAL 9005, textured finish - black, RAL 9005, textured finish | 0.124 | |
10.88 € | 1 | Disponibile | 5 giorni | R-fixed bearing (pin) right | SR-silver, RAL 9006, textured finish - silver, RAL 9006, textured finish | 0.125 | |
10.88 € | 1 | Disponibile | 5 giorni | R-fixed bearing (pin) right | SW-black, RAL 9005, textured finish - black, RAL 9005, textured finish | 0.125 |
Loading...
Informazioni di base
| Larghezza W(mm) | 63 | Width b1 | 32 |
|---|
Configura
Proprietà di base
-
Type
- L-fixed bearing (pin) left
- R-fixed bearing (pin) right
-
Finish
-
Tipo
- 161.2
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 5 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.