Lifting eye bolts (rotating), Steel

Lifting eye bolts (rotating), Steel
  • Sconto volumi elevati
The lifting eye bolts GN 581are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye bolts DIN 580).
Lifting eye bolts GN 581 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
Lifting eye bolts GN 581 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
The hexagon socket bolt cannot be removed from the ring.
Type B is suitable for assembly without the need to use tools: inserting the spanner in the hexagon socket of the bolt allows the bolt to be turned in and out by hand.

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

GN 581 / Lifting Eye Bolts (Rotating)

Information


The lifting eye bolts GN 581 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye bolts DIN 580).
Lifting eye bolts GN 581 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
Lifting eye bolts GN 581 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
The hexagon socket bolt cannot be removed from the ring. Type B is suitable for assembly without the need to use tools: inserting the spanner in the hexagon socket of the bolt allows the bolt to be turned in and out by hand.

see also...
Stainless Steel-Lifting eye bolts GN 581.5

How to Order

How to order
1d1
2Type

Specification

• Ring
 Steel, German Material No. 1.6541
  - Forged
  - High-tensile tempered
   100% electro magnetic tensile tested to EN 1677
  - Plastic coated, pink
• Bolt
 Steel
  - Tensile strength class 10.9
  - 100% electro magnetic tensile tested
• Strength values of screws
• RoHS compliant

Dimensions

d1d2d3d4d5hk1k2Length lNominal load (WLL)
M 6132328203773790.1 t [1.0 kN]
M 81625302546947120.3 t [3.0 kN]
M 101625302546947150.4 t [4.0 kN]
M 1220303430551056180.75 t [7.5 kN]
M 1623.5364035641365241.5 t [15.0 kN]
M 2029415040751676302.3 t [23.0 kN]
M 2435516049901992363.2 t [32.0 kN]
M 304466756011324114454.5 t [45.0 kN]
M 365375907213529135547.0 t [70.0 kN]

Method of Mounting

Method of
mounting
Number11222223 and 43 and 43 and 4
Angles of
inclination
90°90°0 to 45°45 to 60°asymm.0 to 45°45 to 60°asymm.
Factor11221.4112.11.51
M 60.500.10 t1.000.20 t0.140.10 t0.10 t0.21 t0.15 t0.10 t
M 81.00 [ 0.14]0.30 t2.00 [0.28]0.60 t0.42 [0.10]0.30 t0.30 t0.63 t0.45 t0.30 t
M 101.00 [0.23]0.40 t2.00 [0.46]0.80 t0.56 [0.17]0.40 t0.40 t0.84 t0.60 t0.40 t
M 122.00 [0.34]0.75 t4.00 [0.68]1.50 t1.00 [0.24]0.75 t0.75 t1.60 t1.12 t0.75 t
M 164.00 [0.70]1.50 t8.00 [1.40]3.00 t2.10 [0.50]1.50 t1.50 t3.15 t2.25 t1.50 t
M 206.00 [1.20]2.30 t12.00 [2.40]4.60 t3.22 [0.86]2.30 t2.30 t4.83 t3.45 t2.30 t
M 248.00 [1.80]3.20 t16.00 [3.60]6.40 t4.48 [1.29]3.20 t3.20 t6.70 t4.80 t3.20 t
M 3012.00 [3.20]4.50 t24.00 [6.40]9.00 t6.30 [2.30]4.50 t4.50 t9.40 t6.70 t4.50 t
M 3616.00 [4.60]7.00 t32.00 [9.20]14.00 t9.80 [3.30]7.00 t7.00 t14.70 t10.50 t7.00 t

Safety Instructions

The loads given in brackets refer to the load capacity of the corresponding lifting eye bolt DIN 580. If such a value is not indicated the use of the lifting eye bolts DIN 580 is not permitted!
The bolt-on surface for the lifting eye bolts GN 581 must be plane and at a right angle to the threaded borehole; the countersinking must be ≤ the nominal diameter of the thread.
Screwed in, the collar of the screw must make firm contact (do not use washers) and the eye bolt must rotate freely by 360°.
Before applying the load, turn the lifting eye bolt in the direction of the force. The lifting eye bolt is not suitable for frequent rotation cycles under load.
The specified load values apply for a minimum screw-in length of 1.5 × nominal thread diameter in steel with a minimum tensile strength of 37 kp/mm², at an ambient temperature of -40° C to + 100° C. Load-bearing capacity under different conditions upon request.
Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com).
Codice componente
581-M6-A
581-M6-B
581-M8-A
581-M8-B
581-M10-A
581-M10-B
581-M12-A
581-M12-B
581-M16-A
581-M16-B
581-M20-A
581-M20-B
581-M24-A
581-M24-B
581-M30-A
581-M30-B
581-M36-A
581-M36-B
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Misura nominale vite (M) Type Weight

87.64 €

1 Disponibile 7 giorni M 6A-without spanner0.120

100.76 €

1 Disponibile 4 giorni M 6B-with spanner0.080

80.44 €

1 Disponibile 7 giorni M 8A-without spanner0.100

93.56 €

1 Disponibile 4 giorni M 8B-with spanner0.120

80.20 €

1 Disponibile 7 giorni M 10A-without spanner0.120

92.76 €

1 Disponibile 7 giorni M 10B-with spanner0.120

88.60 €

1 Disponibile 7 giorni M 12A-without spanner0.180

104.18 €

1 Disponibile 4 giorni M 12B-with spanner0.190

104.00 €

1 Disponibile 7 giorni M 16A-without spanner0.320

119.70 €

1 Disponibile 7 giorni M 16B-with spanner0.340

135.66 €

1 Disponibile 4 giorni M 20A-without spanner0.490

155.54 €

1 Disponibile Stesso giorno

Stock

M 20B-with spanner0.555

187.28 €

1 Disponibile 4 giorni M 24A-without spanner0.900

207.68 €

1 Disponibile Stesso giorno

Stock

M 24B-with spanner0.990

264.54 €

1 Disponibile 4 giorni M 30A-without spanner1.930

293.16 €

1 Disponibile 4 giorni M 30B-with spanner1.860

432.00 €

1 Disponibile 7 giorni M 36A-without spanner3.100

464.00 €

1 Disponibile 4 giorni M 36B-with spanner3.500

Loading...

  1. 1

Supporto tecnico